Tinygnat219 0 Posted March 3, 2008 Report Share Posted March 3, 2008 Hello, I am a newbie here and I have recently acquired a .308 Saiga with the 16 inch and change barrel. I took it out to the NRA Range here in VA one night and it would only do single shots, the next round would chamber, but the trigger felt like it hadn't reset and the next thing you know it wouldn't fire. So, I'd pull the bolt back, the full round would extract, I'd let the bolt slide forward thereby chambering the next round, and it would fire ok. Any suggestions? Quote Link to post Share on other sites
1liter 20 Posted March 3, 2008 Report Share Posted March 3, 2008 Is your rifle in the stock configuration, or PG'd? If you have PG'd what FCG did you go with? Was your rifle cleaned and lubed? Quote Link to post Share on other sites
RangerM9 1 Posted March 3, 2008 Report Share Posted March 3, 2008 sounds to me like maybe one of the spring arms is not resetting properly. I had that problem after putting in new triger parts on my .223 Just had to bend the spring back into shape a bit. hope thats your problem, its an easy fix. Quote Link to post Share on other sites
G O B 3,516 Posted March 4, 2008 Report Share Posted March 4, 2008 I think Ranger has the most likely answer. It is real easy for one side of the hammer spring to get bent ar not be hooked on the hammer properly. Quote Link to post Share on other sites
Tinygnat219 0 Posted March 4, 2008 Author Report Share Posted March 4, 2008 Is your rifle in the stock configuration, or PG'd?If you have PG'd what FCG did you go with? Was your rifle cleaned and lubed? Rifle is in stock configuration. I have done nothing to it. Rifle was clean. Lube seemed to be lacking, but I didn't see anything wrong. Quote Link to post Share on other sites
Tinygnat219 0 Posted March 4, 2008 Author Report Share Posted March 4, 2008 sounds to me like maybe one of the spring arms is not resetting properly. I had that problem after putting in new triger parts on my .223 Just had to bend the spring back into shape a bit. hope thats your problem, its an easy fix. Ranger, Thanks! It's going to be a couple of weeks before I have the time to tear into it, but I will post back! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.