Bill D. 0 Posted November 9, 2008 Report Share Posted November 9, 2008 I am new here and need a little help. I got a skeletal stock and when I went to install.. The top is no brainer. the bottom has no place to put the screw between the grip and the finger gaurd...Can sopme one please inlighten me? Thank you Bill D. Quote Link to post Share on other sites
g1rock 0 Posted November 14, 2008 Report Share Posted November 14, 2008 Hi Bill, What skeleton stock do you have? If it's an ACE Stock It requires an adapter? You might have solved your problem by now? Quote Link to post Share on other sites
cellsworth 21 Posted November 14, 2008 Report Share Posted November 14, 2008 If it's the factory skeleton stock, only the top two screw positions are used. The arrangement is plenty strong too. Quote Link to post Share on other sites
lonerider 1 Posted November 15, 2008 Report Share Posted November 15, 2008 You don't use a lower screw on the Saiga Skeleton Stock. All that front end of the stock holds it in. Quote Link to post Share on other sites
WardenWolf 6 Posted November 15, 2008 Report Share Posted November 15, 2008 (edited) AK skeleton stocks, in general, do not use grip screws. Neither the Saiga nor the PSL skeleton stocks use a grip screw, despite having an integral pistol grip. Edited November 15, 2008 by Mike the Wolf Quote Link to post Share on other sites
Allthewayto11 0 Posted November 20, 2008 Report Share Posted November 20, 2008 Instead of starting a new thread, I have a related question. When installing the factory skeleton stock, what size drill bit should you use for the pilot holes? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.