GimmeLiberty 0 Posted January 12, 2009 Report Share Posted January 12, 2009 (edited) I recently bought this Saiga 12. When I first got it, I checked the gas chamber and I only had the one hole visible (I already read the FTE thread). I tried it out anyway and it cycled both 2 3/4 Federal on setting 2, and 3 inch Winchester XPERT Hi Velocity on both settings right out of the box. I fired maybe 10-20 rounds through it, all worked fine, then I changed to a Tapco 6 position adjustible stock. Now I can't get the 2 3/4 rounds to cycle correctly. I brought it to the range over the weekend and shot over 100 cheap 2 3/4 and 20 3 inch loads to try and work the action. I got a FTE on every 2 3/4 round, not one cycled. The 3 inch cycled fine everytime. I asked Clyde at RAAC and he said to check if there are 2 more holes paritally hidden. He said he has tested several guns like mine and they worked fine. I didn't do a full conversion, just changed to the Tapco stock and handguard. It is the only thing different from when I first shot the gun and it worked......argghgh!!! Edited January 12, 2009 by GimmeLiberty Quote Link to post Share on other sites
Rustynuts 3 Posted January 12, 2009 Report Share Posted January 12, 2009 No, cause mine collapses LEFT! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.