clay1003 0 Posted March 3, 2009 Report Share Posted March 3, 2009 Friends.. I'm certain this topic has been covered numerous times. Could someone point me to the info concerning re-installation of the BHO for my saiga .410? I'm down to the the wire and so far it's been smoothe sailing.. with the exception of the BHO. All the instructions I've found don't mention it. Is it eliminated by necessity? Or can I re-install it? How? Spring? HELP Thanks, Clay Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted March 3, 2009 Report Share Posted March 3, 2009 As funny as it may sound.....do a search for "dental floss" and see what comes up. Quote Link to post Share on other sites
clay1003 0 Posted March 3, 2009 Author Report Share Posted March 3, 2009 As funny as it may sound.....do a search for "dental floss" and see what comes up. Nothing comes up except your response mentioning dental floss. Can you be more specific? Thanks, Clay Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted March 3, 2009 Report Share Posted March 3, 2009 There are numerous threads on here describing the procedure. One way is to use some floss or srting, wire, etc, and run it up through the bottom of the BHO slot, through the loop in the spring (long leg toward the front), and back down through the slot. Put the spring and the BHO in with the short leg of the spring hooked on the notch in the BHO. Put the hammer in and insert the hammer pin, while lining up the hole at the front of the BHO lever. Pull down on the string to hold the spring in position while you put the axis pin through from the left, through the trigger sleeve, and seat it in the receiver holes. There's also a way to do it by putting the rear pin in first. Go to CSS's business section and click on the link to his video on youtube. Here ya go... Quote Link to post Share on other sites
whitetrashrn 74 Posted March 3, 2009 Report Share Posted March 3, 2009 I grab the top of the spring with heaostats (clamping medical pliers) push the spring down and push the pin through. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.