crafty101 2 Posted November 26, 2009 Report Share Posted November 26, 2009 I have a saiga 12 108z and i bought the Md gas selector dial the one that has 3 settings and it wont fit because it too big around it hits the barrel, I guess i can grind it down but it said on the web site it just screws in just like stock. Thanks for the reply Quote Link to post Share on other sites
DyLonX5 3 Posted November 26, 2009 Report Share Posted November 26, 2009 Sometimes you have to file a small amount off the barrel. Don't grind. Just use a good file and take a few passes and try it again, if it still doesn't fit repeat until it fits. Quote Link to post Share on other sites
read_the_wall 614 Posted November 26, 2009 Report Share Posted November 26, 2009 I had to grind about .020" off the diameter of the gas plug to make it work well. A little paint, and good to go. Quote Link to post Share on other sites
crafty101 2 Posted November 26, 2009 Author Report Share Posted November 26, 2009 Ok thanks for your help. ill try that because i shoot all types of loads low and tall brass and i want the gun to be very reliable Quote Link to post Share on other sites
skiboatsp 111 Posted November 26, 2009 Report Share Posted November 26, 2009 (edited) Modify the gas plug not the barrel If you don't have access to a lathe use a belt sander or a drill press and a file Where there's a will there's a way Edited November 26, 2009 by saigatechusa Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.