frick 3 Posted February 21, 2010 Report Share Posted February 21, 2010 I noticed this on the last Mak conversion, you cant rotate the safety lever up past the FCG to get it out. I had to remove the pins and move the whole assembly up away from the lever before it would clear, and then, the type of safety on the G2 trigger group did not work the same as the Original. I made it work by grinding the part that actually engages the sear or disconnector away till it just cleared, is there something I am missing here? Thanks in advance. Quote Link to post Share on other sites
corbin 621 Posted February 22, 2010 Report Share Posted February 22, 2010 I haven't messed with the MAKs before, but did you have the hammer forward and pull the trigger back while trying to clear the safety tab's rotation past the trigger? I know on my Saiga, it hits the back of the disconnector and I have to pull the trigger for it to clear. Sorry I can't be of more help. Corbin Quote Link to post Share on other sites
kresk 10,063 Posted February 22, 2010 Report Share Posted February 22, 2010 Depending on the type of disconnector and the tab on the safety, sometimes the selector can go in first, sometimes last. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.