PinkFloyd 63 Posted May 17, 2010 Report Share Posted May 17, 2010 Looking to get 75$ plus the cost of shipping via paypal for this beautiful custom finished wood set from Klassy. It's Russian Red with 9 coats of Poly and glistens in the sun. New condition, I haven't mounted it to a rifle, tho I have inletted a little to allow fitting on a Saiga conversion Set includes the stock, upper and lower handguards and a Romanian brown bakelite pistol grip, sorry no screw. Link to post Share on other sites
loki0629 55 Posted May 17, 2010 Report Share Posted May 17, 2010 They look great but I'd like to know if they are made in US. Link to post Share on other sites
Klassy Kalashnikov 1,393 Posted May 17, 2010 Report Share Posted May 17, 2010 (edited) They are foreign in origin. most likely Romanian. It isn't too bad to get 922r compliance with these though, floorplate and followers are two easy parts to swap out. Edited May 17, 2010 by Klassy Kalashnikov Link to post Share on other sites
loki0629 55 Posted May 17, 2010 Report Share Posted May 17, 2010 They are foreign in origin. most likely Romanian. It isn't too bad to get 922r compliance with these though, floorplate and followers are two easy parts to swap out. Ok thanks. You think these would fit a 308? Link to post Share on other sites
Klassy Kalashnikov 1,393 Posted May 17, 2010 Report Share Posted May 17, 2010 Yes, they will Link to post Share on other sites
PinkFloyd 63 Posted May 17, 2010 Author Report Share Posted May 17, 2010 Thanks Klassy, yeah they should fit a S.308. I hate to sell them I just couldn't get my rifle to be compliant... I'm using Weiger and Bulgy mags... needed a US made stock set :/ Link to post Share on other sites
loki0629 55 Posted May 17, 2010 Report Share Posted May 17, 2010 Thanks Klassy, yeah they should fit a S.308. I hate to sell them I just couldn't get my rifle to be compliant... I'm using Weiger and Bulgy mags... needed a US made stock set :/ And I'm still using factory mags on my 308...sorry, I'll have to pass for now. Best of luck. Link to post Share on other sites
PinkFloyd 63 Posted May 17, 2010 Author Report Share Posted May 17, 2010 Well you could always buy the furniture and have it on hand for when you do get some US made mags *shameless plug* Link to post Share on other sites
loki0629 55 Posted May 17, 2010 Report Share Posted May 17, 2010 LOL! No promises Floyd but I'll keep an eye on this post. Link to post Share on other sites
Cowtown 1 Posted May 17, 2010 Report Share Posted May 17, 2010 They are foreign in origin. most likely Romanian. It isn't too bad to get 922r compliance with these though, floorplate and followers are two easy parts to swap out. What needs to be done to make them fit my Sagia x39? Link to post Share on other sites
PinkFloyd 63 Posted May 17, 2010 Author Report Share Posted May 17, 2010 Nothing really, I've already fitted the stock for a Saiga rifle. So long as you have retainers and a gas tube you're set to go. If you don't have retainers or a gas tube I have some spares that I can add for a little extra. Link to post Share on other sites
Cowtown 1 Posted May 17, 2010 Report Share Posted May 17, 2010 (edited) Nothing really, I've already fitted the stock for a Saiga rifle. So long as you have retainers and a gas tube you're set to go. If you don't have retainers or a gas tube I have some spares that I can add for a little extra. I don't have the retainer or gas tube.. does the piston have to be changed also? I have just done the basic restoration. Edited May 17, 2010 by Cowtown Link to post Share on other sites
Klassy Kalashnikov 1,393 Posted May 17, 2010 Report Share Posted May 17, 2010 Nothing really, I've already fitted the stock for a Saiga rifle. So long as you have retainers and a gas tube you're set to go. If you don't have retainers or a gas tube I have some spares that I can add for a little extra. I don't have the retainer or gas tube.. does the piston have to be changed also? I have just done the basic restoration. Nope, the piston is fine. All you need is like Floyd said, the tube and retainer. Both are very easy to just swap in and out. Link to post Share on other sites
PinkFloyd 63 Posted May 18, 2010 Author Report Share Posted May 18, 2010 Nothing really, I've already fitted the stock for a Saiga rifle. So long as you have retainers and a gas tube you're set to go. If you don't have retainers or a gas tube I have some spares that I can add for a little extra. I don't have the retainer or gas tube.. does the piston have to be changed also? I have just done the basic restoration. Nope, the piston is fine. All you need is like Floyd said, the tube and retainer. Both are very easy to just swap in and out. Yep. I can include all the mounting hardware for an additional 50$, I have a vented gas tube that's been modded to fit a Saiga and a Klassy Kalashnikov lower handguard retainer, both are unused. Link to post Share on other sites
Cowtown 1 Posted May 18, 2010 Report Share Posted May 18, 2010 Nothing really, I've already fitted the stock for a Saiga rifle. So long as you have retainers and a gas tube you're set to go. If you don't have retainers or a gas tube I have some spares that I can add for a little extra. I don't have the retainer or gas tube.. does the piston have to be changed also? I have just done the basic restoration. Nope, the piston is fine. All you need is like Floyd said, the tube and retainer. Both are very easy to just swap in and out. Yep. I can include all the mounting hardware for an additional 50$, I have a vented gas tube that's been modded to fit a Saiga and a Klassy Kalashnikov lower handguard retainer, both are unused. Where would I get floorplate and followers for my 30 and 20 rd metal mags? Link to post Share on other sites
PinkFloyd 63 Posted May 18, 2010 Author Report Share Posted May 18, 2010 Try tapco? They're pretty cheap and widely available... Link to post Share on other sites
Klassy Kalashnikov 1,393 Posted May 18, 2010 Report Share Posted May 18, 2010 K-var sells packs of followers and floorplates for compliance too. Very cheap and they make them for all kinds of magazines. Link to post Share on other sites
macross40k 0 Posted May 18, 2010 Report Share Posted May 18, 2010 I'm very interested, will let you know for sure as soon as I can! Link to post Share on other sites
Cowtown 1 Posted May 19, 2010 Report Share Posted May 19, 2010 K-var sells packs of followers and floorplates for compliance too. Very cheap and they make them for all kinds of magazines. thanks Klassy... I am interested.. but had to get a new phone yesterday... set me back on funds... if they are still around on the 1st I will see what I can do... Link to post Share on other sites
macross40k 0 Posted May 24, 2010 Report Share Posted May 24, 2010 Is this still for sale? Link to post Share on other sites
PinkFloyd 63 Posted May 26, 2010 Author Report Share Posted May 26, 2010 Is this still for sale? Sold and shipped Link to post Share on other sites
Recommended Posts