ICarryIWB 2 Posted June 8, 2010 Report Share Posted June 8, 2010 (edited) Hey guys, I did a full 922r conversion on my Saiga 7.62x39mm. The first time out I function tested it with a magazine or two and everything worked fine. The second time out I noticed that my trigger wasn't resetting -- after I pulled it the gun would fire, but in order to fire it again, I had to nudge the trigger forward. Sometimes it worked fine and I could make my next shot with no problems, and other times I had to nudge it to get it to reset. There has got to be a very simple explanation as to why this is happening. I'm running a custom Tapco G2 FCG by Dinzag. Thanks for the help in advance. Edited June 8, 2010 by ICarryIWB Quote Link to post Share on other sites
L5K 162 Posted June 8, 2010 Report Share Posted June 8, 2010 Sounds to me like the hammer spring is not pressing down properly on the "legs" on the rear of the trigger. Make sure the long parts coming off the hammer spring are pressing on the trigger and haven't slipped off. Quote Link to post Share on other sites
elia.jon1 1 Posted June 9, 2010 Report Share Posted June 9, 2010 sometimes the trigger hole is tight....work it without having i cocked and see if its catching i had to "loosen" both my 12 and my 7.62 to let the trigger move "freely" Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.