Oldwheat 0 Posted September 15, 2005 Report Share Posted September 15, 2005 .....Well, the barrel threading kit & cannon style muzzle brake is on the way....Now I'm looking for options on replacement forends....Not too sure I like the looks of the Galil type but, hey, functionality is the major priority ..........Suggestions please... Quote Link to post Share on other sites
stokstad 4 Posted September 15, 2005 Report Share Posted September 15, 2005 .....Well, the barrel threading kit & cannon style muzzle brake is on the way....Now I'm looking for options on replacement forends....Not too sure I like the looks of the Galil type but, hey, functionality is the major priority ..........Suggestions please... <{POST_SNAPBACK}> You can buy one of the handguards like you suggested or you can buy a gas tube and retainer and modify the retainer and use any AK style foregrips you wish. like this: http://forum.saiga-12.com/index.php?showtopic=6177&hl= Quote Link to post Share on other sites
BattleRifleG3 16 Posted September 15, 2005 Report Share Posted September 15, 2005 If wood is a consideration, I can make integrally retained lower handguards in a number of styles. You can then match an upper handguard with a new gas tube as suggested above. I believe the AK-74 one will fit the Saiga. Quote Link to post Share on other sites
jon elia 0 Posted September 15, 2005 Report Share Posted September 15, 2005 the galil takes some getting used to but after a while it feels good....i'm thinking about getting the tri rails so i can mount a forgrip for my romy... but if you need to get rid of the factory saiga let me know how muhc you want(if a decent price) Quote Link to post Share on other sites
Oldwheat 0 Posted September 16, 2005 Author Report Share Posted September 16, 2005 the galil takes some getting used to but after a while it feels good....i'm thinking about getting the tri rails so i can mount a forgrip for my romy... but if you need to get rid of the factory saiga let me know how muhc you want(if a decent price) <{POST_SNAPBACK}> ..Do you mean the original foregrip??..... Quote Link to post Share on other sites
jon elia 0 Posted September 16, 2005 Report Share Posted September 16, 2005 i mean like an extra p grip...hanging from the tapco galil Quote Link to post Share on other sites
Oldwheat 0 Posted September 16, 2005 Author Report Share Posted September 16, 2005 i mean like an extra p grip...hanging from the tapco galil <{POST_SNAPBACK}> ..I think you misunderstood the question ....What are you referring to when you say 'factory Saiga'?....The original stock & forend or the entire gun??.... Quote Link to post Share on other sites
jon elia 0 Posted September 16, 2005 Report Share Posted September 16, 2005 original forend Quote Link to post Share on other sites
Oldwheat 0 Posted September 18, 2005 Author Report Share Posted September 18, 2005 (edited) On further reflection, I think I'll keep the stock forend..... Would I run into any major snags if I were to drill some vent holes in the stock gas tube....Any suggestions= hole size, location, etc. would be greatly appreciated......... Edited September 18, 2005 by Oldwheat Quote Link to post Share on other sites
IndyArms 10,186 Posted September 19, 2005 Report Share Posted September 19, 2005 That has been done, and works well... I have no idea what thread to look under, so I will just say that there are pics of guns here with holes drilled in the gas tubes. If I were drilling, I would place the holes at the 10 and 2 positions to vent gasses upwards away from your hands as you hold it, however I forget how others have done it and for what reasons... IIRC I think I saw pics of them at both the 3 and 9 positions, as well as the 8 and 4 positions, too...OH...and only for the first inch to two inches closest to the gas block. Hole size I would say in the 1/16th to 1/8th inch range... give or take a little bit... no real "perfect size" I dont think, other than not TOO BIG... or you wouldnt have enough gas pressure to cycle the action... Mind you this is all my opinion... and take it for what its worth... others may be able to add more specifics to this... and if I have made any errors in my speak, PLEASE... correct me!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.