SGM 217 Posted July 17, 2012 Report Share Posted July 17, 2012 We are the only company that produce Saiga shotgun chokes. Pick up your set today. http://www.sgmtactical.com/catalog/index.php?main_page=index&cPath=7&sort=20a&page=2 <--------for more information Quote Link to post Share on other sites
FOURBUX 22 Posted July 17, 2012 Report Share Posted July 17, 2012 Hmm. I assume these thread onto factory threads? Quote Link to post Share on other sites
SGM 217 Posted July 17, 2012 Author Report Share Posted July 17, 2012 yep sure do Quote Link to post Share on other sites
gregomega 929 Posted July 17, 2012 Report Share Posted July 17, 2012 Any plans to thead the ends of the chokes???? Like this: that would be super frikn spectacular and I would 500% be down for a set or two of threaded chokes. I just need one business with the capabilities to pull the trigger and make them. Quote Link to post Share on other sites
FOURBUX 22 Posted July 17, 2012 Report Share Posted July 17, 2012 Any plans to thead the ends of the chokes???? Like this: that would be super frikn spectacular and I would 500% be down for a set or two of threaded chokes. I just need one business with the capabilities to pull the trigger and make them. Although this would be awesome because it would be modular and allow you to put something on the end of the choke, I don't think it will work for this set since the end is tapered. In addition, the end would also be the size of the inside of the bore with threads on the outside, so nothing would fit it. Quote Link to post Share on other sites
gregomega 929 Posted July 17, 2012 Report Share Posted July 17, 2012 Nothing a few turns on the lathe wouldn't fix. And if they can make these, it shouldn't be too hard to make a modified version and charge for the extra labor. Molot seems to have figured it out. Nohing a compitent cnc programer shouldn't be able to make. Or even someone with a metal lathe could do it I'm sure. I could be wrong Quote Link to post Share on other sites
Mullet Man 2,114 Posted July 17, 2012 Report Share Posted July 17, 2012 (edited) In addition, the end would also be the size of the inside of the bore with threads on the outside, so nothing would fit it. How so? The choke end gets necked down to the same OD of the OE barrel and then threaded the same as an OE muzzle. The external threads would be the same as on the muzzle end of any S12. Its essentially a barrel extension with female and male ends, just with a choke built into it. It would add a butt load of length to it and look goofy as shit. Could be a good option for chopping the barrel down and bringing the OAL back to non NFA specs. Edited July 17, 2012 by Mullet Man 1 Quote Link to post Share on other sites
FOURBUX 22 Posted July 17, 2012 Report Share Posted July 17, 2012 (edited) In addition, the end would also be the size of the inside of the bore with threads on the outside, so nothing would fit it. How so? The choke end gets necked down to the same OD of the OE barrel and then threaded the same as an OE muzzle. The external threads would be the same as on the muzzle end of any S12. Its essentially a barrel extension with female and male ends, just with a choke built into it. It would add a butt load of length to it and look goofy as shit. Could be a good option for chopping the barrel down and bringing the OAL back to non NFA specs. I think you're right, I don't know what I was thinking when I was looking at the picture AZG posted. Would definitely be cool to have the ability to use a choke and a break if you wanted to. AZG - are those made for the S-12? Edited July 17, 2012 by FOURBUX Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.