toothandnail 275 Posted April 6, 2013 Report Share Posted April 6, 2013 Actually had them ready all week, just too much stuff going on, more on that in another thread. Not the best pics but you get the idea , I'll have some better ones when they get added to our website. Some pretty BAD pics Quote Link to post Share on other sites
SHOTGUN MESIAH 855 Posted April 6, 2013 Report Share Posted April 6, 2013 is it going to be possible to get your finger in and on top of the mag release button? especially if it is a big oversize button? the last picture you posted looks like the original small stock mag release button and it doesn't look like much room to get in there, seems like the larger oversize buttons would make it impossible. Quote Link to post Share on other sites
toothandnail 275 Posted April 6, 2013 Author Report Share Posted April 6, 2013 I'll get a better pic of that, it has our big mag release on, plenty of room for quick mag changes. We also have a shell stop , I forgot to get a pic. Quote Link to post Share on other sites
1919 Shotty 2 Posted April 6, 2013 Report Share Posted April 6, 2013 When can we have our hands on them? Quote Link to post Share on other sites
toothandnail 275 Posted April 6, 2013 Author Report Share Posted April 6, 2013 Here are the other pics, to show the clearance, our mag release and factory button. I will try and get them added to our website by Monday at the latest, I MAY get them up late tonight. Quote Link to post Share on other sites
toothandnail 275 Posted April 6, 2013 Author Report Share Posted April 6, 2013 Shell stop , ANYBODY , have an Idea where we can source this part? The movable side of the picatinny rail clamp. I've called quite a few Co's that have them on their scopes/accessories , can't find anybody yet that will sell parts. I REALLY don't want to have to MAKE this as well. We have an alum one that will work , just not as low profile as the stamped steel one. Quote Link to post Share on other sites
idahodan 2 Posted April 6, 2013 Report Share Posted April 6, 2013 magpul Quote Link to post Share on other sites
aerosigns 4 Posted April 10, 2013 Report Share Posted April 10, 2013 Matt, I have an easy solution to the mount. I have a block that holds my brass catchers. All of it is made from a single block of aluminum. Tomorrow I will take some pictures and post them. Maybe you will see something that you can adapt. Basically it has a hole on one side and threads on the other. Then a brass screw goes through one of the picatinny slots to keep it from sliding. I have about 60 of them and have never had a malfunction. I had a shop make them and they ran less than $5 each. Quote Link to post Share on other sites
JeremyT 15 Posted April 10, 2013 Report Share Posted April 10, 2013 Matt, I have an easy solution to the mount. I have a block that holds my brass catchers. All of it is made from a single block of aluminum. Tomorrow I will take some pictures and post them. Maybe you will see something that you can adapt. Basically it has a hole on one side and threads on the other. Then a brass screw goes through one of the picatinny slots to keep it from sliding. I have about 60 of them and have never had a malfunction. I had a shop make them and they ran less than $5 each. I'm interested in seeing that as well. Quote Link to post Share on other sites
toothandnail 275 Posted April 10, 2013 Author Report Share Posted April 10, 2013 Finally , got them on the site. Areosigns Thanks, I'd be interested in seeing what you got, we've had a few requests to make a shell catcher mount. No time for that yet. We kicked that Idea around(I think I understand what it looks like) but wanted to be able to remove it without moving anything else on the rail. Personally , I don't like attachments that have to slide on the rail from one end or the other, I like a drop on mount. I may be WAY off , guess we'll see when you post the pic. Quote Link to post Share on other sites
aerosigns 4 Posted April 10, 2013 Report Share Posted April 10, 2013 Here is what the blocks look like. They are used to hold a brass catcher. The block slided along the rail. Then you put in the screw and tighten. The block will not move. For your project I think the idea would be easily adaptable. Quote Link to post Share on other sites
Armand Willis 4 Posted April 10, 2013 Report Share Posted April 10, 2013 Shell stop , 20130406_092120.jpg 20130406_091826.jpg ANYBODY , have an Idea where we can source this part? The movable side of the picatinny rail clamp. I've called quite a few Co's that have them on their scopes/accessories , can't find anybody yet that will sell parts. I REALLY don't want to have to MAKE this as well. We have an alum one that will work , just not as low profile as the stamped steel one. 20130406_092214.jpg Just hilarious. Quote Link to post Share on other sites
Syndicate 812 Posted April 10, 2013 Report Share Posted April 10, 2013 Shell stop , 20130406_092120.jpg 20130406_091826.jpg ANYBODY , have an Idea where we can source this part? The movable side of the picatinny rail clamp. I've called quite a few Co's that have them on their scopes/accessories , can't find anybody yet that will sell parts. I REALLY don't want to have to MAKE this as well. We have an alum one that will work , just not as low profile as the stamped steel one. 20130406_092214.jpg Just hilarious. ? Quote Link to post Share on other sites
Armand Willis 4 Posted April 10, 2013 Report Share Posted April 10, 2013 Shell stop , 20130406_092120.jpg 20130406_091826.jpg ANYBODY , have an Idea where we can source this part? The movable side of the picatinny rail clamp. I've called quite a few Co's that have them on their scopes/accessories , can't find anybody yet that will sell parts. I REALLY don't want to have to MAKE this as well. We have an alum one that will work , just not as low profile as the stamped steel one. 20130406_092214.jpg Just hilarious. ? Saw one just like it at SHOT. Quote Link to post Share on other sites
Anubis 38 Posted April 10, 2013 Report Share Posted April 10, 2013 Saw one just like it at SHOT. That would have been my gun, none of the others at SHOT had our shell stop installed. Quote Link to post Share on other sites
Armand Willis 4 Posted April 10, 2013 Report Share Posted April 10, 2013 Saw one just like it at SHOT. That would have been my gun, none of the others at SHOT had our shell stop installed. Thats what I thought. Quote Link to post Share on other sites
cw_mi 1 Posted April 10, 2013 Report Share Posted April 10, 2013 Just ordered two!! Quote Link to post Share on other sites
toothandnail 275 Posted April 10, 2013 Author Report Share Posted April 10, 2013 Saw one just like it at SHOT. That would have been my gun, none of the others at SHOT had our shell stop installed. Thats what I thought. Kinda hard to copy something we have never seen. We made ours with testing and our imagination. Sorry you all are pissed cause you no longer have the market cornered. IF you want a pissing match, There's A LOT I can find wrong with the "new " lower. I haven't said anything, and won't unless you guys want to keep up the childish nature of your comments. I don't comment in your threads. I JUST looked at your web site , last UPDATED, ONE YEAR AGO , nothing there SO Seems to me your parts are a lot like the mythical bird on your logo. 1 Quote Link to post Share on other sites
1919 Shotty 2 Posted April 10, 2013 Report Share Posted April 10, 2013 Saw one just like it at SHOT. That would have been my gun, none of the others at SHOT had our shell stop installed. Thats what I thought. Kinda hard to copy something we have never seen. We made ours with testing and our imagination. Sorry you all are pissed cause you no longer have the market cornered. IF you want a pissing match, There's A LOT I can find wrong with the "new " lower. I haven't said anything, and won't unless you guys want to keep up the childish nature of your comments. I don't comment in your threads. I JUST looked at your web site , last UPDATED, ONE YEAR AGO , nothing there SO Seems to me your parts are a lot like the mythical bird on your logo. 1 Quote Link to post Share on other sites
Anubis 38 Posted April 10, 2013 Report Share Posted April 10, 2013 Oh trust me I have zero intention of being anything less than civil. But anyway, I would like to know what you think is wrong with the lower, and our website www.3gunusa.com is 99% complete and our actual Firebird page is getting a ground up rebuild. Quote Link to post Share on other sites
Armand Willis 4 Posted April 10, 2013 Report Share Posted April 10, 2013 "Imitation is the sincerest form of flattery" Nobody mentioned anything about copying. Quote Link to post Share on other sites
toothandnail 275 Posted April 11, 2013 Author Report Share Posted April 11, 2013 Just ordered two!! Shipped , Thanks Quote Link to post Share on other sites
Yeeb 3 Posted April 11, 2013 Report Share Posted April 11, 2013 "Seems to me your parts are a lot like the mythical bird on your logo." Zing! Firebird might be a 3 Gun legend, but Tooth & Nail is definitely The People's Champ. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.