Rhodes1968 1,638 Posted April 15, 2014 Report Share Posted April 15, 2014 Have a 0.689" OD (at the cut) 308 barrel I need to shorten and add a brake. Any of you gurus like to chip in on the following please do. What die should I use at this size? Dinzag sells a M17x1 RH but lets face it options are extremely limited at that size. Any help? Quote Link to post Share on other sites
poolingmyignorance 2,191 Posted April 15, 2014 Report Share Posted April 15, 2014 (edited) Never mind. I was thinking .675, not.625. You'd have to turn the barrel down for 5/8 to Work Edited April 15, 2014 by poolingmyignorance Quote Link to post Share on other sites
Sdustin 578 Posted April 15, 2014 Report Share Posted April 15, 2014 Best bet is to have a machinist turn it down and thread it on a lathe. My machinist had jaws big enough to set my s308 up without removing the barrel. What length barrel do you have and how short are you going to go? Also id suggest you go with something like a flash hider. The only true brake Ive shot was an aac brake and it was on a 16 556 and it would ring your ears through muffs. To me the loudness wasn't worth the cut in recoil. Quote Link to post Share on other sites
Rhodes1968 1,638 Posted April 15, 2014 Author Report Share Posted April 15, 2014 Thanks Turning down just isnt an option, no one around here will do the work and shipping is just not going to happen. Quote Link to post Share on other sites
poolingmyignorance 2,191 Posted April 15, 2014 Report Share Posted April 15, 2014 The FSC 30 is an excellent break for 30.it's what I put on my s308, and the PSL builds I did with Keith at tac47. It was so effective I was able to dump four rounds into the test drum with no stock our pistol grip. And finished welding up receiver back plates with the same hand that day. Quote Link to post Share on other sites
Sdustin 578 Posted April 15, 2014 Report Share Posted April 15, 2014 Rhodes1968 ill bet there is someone locally that could do the work. Look up machinist locally. Most machinists are into guns and would be willing to help if they can. Ask if they could set up an odd shaped part and turn between centers. And if you absolutely cant find someone dinzag sells a tool for a drill that will turn down the barrel to be able to us their hand tap set. And if you have no plans to ever use a silencer hand tapping should be fine. Quote Link to post Share on other sites
DrThunder88 912 Posted April 15, 2014 Report Share Posted April 15, 2014 I threaded a .670" muzzle with a 5/8"-24 die without any sort of trimming. I don't know about .689 though. I suspected that it would be possible to file a set flats around the muzzle, knock off the resultant corners on the second pass, and let the die do the rest of the work. To go from .689" to .625", you'd only need to remove 1/32" from each flat. That's just speculation though. Quote Link to post Share on other sites
Sdustin 578 Posted April 15, 2014 Report Share Posted April 15, 2014 (edited) Double post Edited April 15, 2014 by Ak Monty Quote Link to post Share on other sites
termite 463 Posted April 17, 2014 Report Share Posted April 17, 2014 Most machine shops won't touch a gun with a ten foot pole, they all claim a "liability issue", I asked the guy that does some CNC work for us to engrave the end of my .45 ACP barrel in my Kimber with "Smile wait for flash". He's got one bad ass CNC mill that can just about wipe your butt, if you can program it, 4 axis and all that crap, but he took one look at it and just about crapped his pants. I had already talked with the guy that runs the mill and he was all fire up and ready to do it, but the boss shot him done, all because, he "didn't want it coming back on him if something BAD happened". WTF Quote Link to post Share on other sites
Rhodes1968 1,638 Posted April 17, 2014 Author Report Share Posted April 17, 2014 Most machine shops won't touch a gun with a ten foot pole, they all claim a "liability issue", I asked the guy that does some CNC work for us to engrave the end of my .45 ACP barrel in my Kimber with "Smile wait for flash". He's got one bad ass CNC mill that can just about wipe your butt, if you can program it, 4 axis and all that crap, but he took one look at it and just about crapped his pants. I had already talked with the guy that runs the mill and he was all fire up and ready to do it, but the boss shot him done, all because, he "didn't want it coming back on him if something BAD happened". WTF This ^ I am going with Dinzag all the way on these projects, he has was is needed ans thank god for him. Quote Link to post Share on other sites
frz1197 128 Posted April 18, 2014 Report Share Posted April 18, 2014 I turned down a mosin barrel from .690ish to thread at .625. Used cutter and a pilot from cnc warrior. Was pretty easy and it ended up panning out with no big issues. Quote Link to post Share on other sites
paprotective 362 Posted April 18, 2014 Report Share Posted April 18, 2014 For my 308 Saiga.. I did a post a long time back (like 2009) on threading it.. I did the 17 DIE and TAT from Dinzag.. and in an email asked him if he could take a 5/8-24 brake/comp I wanted and redo it to 17.. and he did.. he's got the shop to do it.. I then received my brake/comp back within a week that just went right on.. He also has accounts with a few places and can just order the brake you want and do it from their.. Quote Link to post Share on other sites
Rhodes1968 1,638 Posted April 18, 2014 Author Report Share Posted April 18, 2014 Oh Ive done barrel work before but I now have two goals here, keep it simple and do it with what I have available. Dinzag is making things easier and damn glad for it. Yeah easier (cheaper also likely) to have others with more skill and tools do the work and any other time I might, but frankly this isnt the time to be shipping firearms around IMHO. Besides afterwards I will have the skill and the tools to do the job as many times as I wish. Later I will give turning down the barrel a go (with the scrap pieces of course) when I get a suitable drill press. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.