crafty101

i bought the same scope for mine the only thing i dont like is that the laser site dont hold adjustment i found out a little bit of clear finger nail polish solved that problem, i have 3 ncstar green laser sites i love them there very very bright and there shine for along way out, but like the scope i had to use a drop of clear finger nail polish on the adjustments to keep them from moving, ive been pounding mine with 3 inch magnums and 2 and 2/3 inch rounds to see how the scope holds up so far so good. i really dont like red laser sights just because you cant see them in the day time there gr

Mines number 266

thats sharp i think Ill try that scope any hints on whats the best way to make the scope fit without breaking it? thanks for your reply

then why do so many people have problems mounting scopes on them, Mines out of spec the scope wont mount level because the rail is too thick and ive tried all types of scopes. Plus if was fixed so early why are there so many of them out there without of spec rails?

your best bet for accuracy is to take off the carrying handle and put some scope mounts directly on the flat top. the flat top is to thick for a mount on the flat top ive tried. its not up to specs on the newer version thats why rev2 is changing that to specs.

Has anybody tried the ar15 handle mount yet. I know the mka has 2 holes in the top i was wondering if a regular ar15 mount would work on the handle?

i was using federal bulk pack

it would shoot hi brass fine but not low brass thats why i installed it. I tried shooting low brass and FTE everytime with the bushing in it. And to Jasper ive soaked every part of it in CLP and lubicated very well. That is why you made the bushings right? to help it shoot low brass?

I put about 300 rounds in it before i put the bushing in. when i put it in and tried shooting with the bushing it would FTE everytime, I know every gun is different during break in but i was wondering abou how many rounds of Hi brass, or low brass i should put through it with the bushing in it to break the bushing in.

whats the best way to break in the low brass bushing. thanks for your reply

Heres mine with out a riser on the rail. The scope mounted perfect on it. the scope came this way it was made for m16's

did you use clp cleaner or lubicant when you soaked it?

i just live right across town from them.

I do alot of business with them that why they gave me 2.

There is only one bug, the rail. Other than that I can already say with hicap mags my Saiga will be pushed to the back of the safe. no need to push it back! sell that saiga to me and get a whole bunch of ammo for your akdal! I'm hoping the akdal becomes tremendously popular and the price of the saiga drops down. It will be hard to convince people that akdal is a legit quality company. I'm still quite skeptical. Two of the most trusted saiga converters have already said they are awesome so that's a real plus. Once they are fielded and torture tested, I may bite the bullet. quite

actually they gave me 2 one for spare.

i bought mine at Centerfiresystems.com they gave me a free bushing for low brass shells and told me to shoot about 3 boxes through it to make sure everything works properly, But so far ive been shooting winchester high brass super x 4 1/2 shot through mine. I shout about 4 boxes through it and had only 1 to fail to feed but that was the factory mag. I bought several spare mags and they did fine. I love how the bolt stays open after the last shot, quick reload times. and I tried out how fast i could shoot it. Mine came with a real light trigger pull, alot lighter than my converted saiga 12 and

I dont have the old heavier spring the gunsmith kept it and when i called to see if he still had it he said no. I'm going to try the first plan. If that dont do it where can i get another heavier spring thanks for your help

thats what carolina shooting supply sold me they told me it would help with a better and smother trigger,

i bought the Spring at carolina shooters supply. they have a video on it.

I wish somebody would make a beta drum mag for the .308 i love my gun i just wish i had a couple of drums for it:)

Retaining plate Retaining plate

I had my saiga 12 converted by a gunsmith who i thought was doing a good job but. the trigger wont reset which i mean it will feed a couple times then you have to push the trigger forward to get it to fire, sometimes it will shoot a couple times then it will happen, im using surefire mags, i have 1 md drum and 1 20 promag drum and it happends on any mag, But if you dry fire it the trigger resets it self fine, only when you shoot it, Ive taken back several times to the gunsmith but apperently he cant figure it out, so thats why i'm looking for a company to send it too, so they can go competely

Whats the best store bought spray paint to use for touch up work, Thanks for your reply

is there a magwell installtion video out there i know it has instructions but i like to see one added on before i take on the task.