Shadoh

Ill take one of the next 50, unless all those first 20 guys back out and I get bumped to that list )

3451

All fixed. Drilled a new port and opened up the other two that would be in use. Drilling out the pin holes required very little material removal so Im not concerned with that. Opened up the port hole inside the gas block and cleaned it up a bit. I leveled the gas block to the gun using the handguard boss on the bottom. It was machined straight with the block so I didnt feel I needed to redo that at least. The gun has definitely been fired at least once. There is very little carbon on the puck but its there. There is a faint outline on the barrel from the port hole in the gas block.

Hey guys, love the site. Ive lurked here awhile and in the end you guys talked me into ordering a Saiga 12 without even knowing I was there ). THANKS! The gun showed up a few days ago and the first thing I noticed was that the gas block was off center by ALOT, 3/16 to a 1/4 inch. Needless to say the sights are useless and I cant imagine that piston making that twist with every cycle is doing any good. The gun has been fired so I assume that they test fired it at the factory. They must have no pride in their work to let this one slide through. What a shame. I removed the gas block t

1736