Dada187

I think it 40$ to vent and slant cut the end then $7 for shipping ! I think its well worth it

Actually with that mag it is not 922 compliant but i have a 30rnd pro-mag which makes it all good! Thanx for the comments glad everyone likes it. Just wanted to b a lil different!lol

Just wanted to b different, so i polished it! Thanx

Devin does GREAT work dont he? http://forum.saiga-12.com/index.php?showtopic=16617

U R Probably Right,LOL! But thats a good idea as well thanx

I got the kit from blackjackbuffers.com and they sell it as a kit but they get it from ACE,but if you order it from ACE yeah they sell it in parts. Its even cheaper at blackjacks also,lol!

No I didnt do a full conversion i got a 30rnd pro-mag and got the ACE folding stock with the pistol grip?

Tha mag thats in the saiga is the one in talkn bout on the back side of the mag thats by the mag release it has a thin peice of metal that runs down tha hole mag it actually sit out about a 8th of an inch from the mag ???????Thanx again

When i bought my saiga it came it a 30rnd mag like the ont in the pic an if its foriegn i need to get rid of it so just wanted to know if anyone can tell me where it was made.Thanx

Just recieved my bullet guide kit from dinzag thanx alot, so i got my guide installed in no time slapped my mag in and she feed like a champ! Now it time to take it to tha range and find out if it will do tha same under fire. I''ll let u know how things turn out !Gotta get in touch wit devin my handguards are next on the list!

Yeah its the pistol grip and folding stock from ACE! Thanx again for the help!

I have bought a us made pistol grip and folding stock from ACE and also bought a 30rnd pro-mag which is also us made and im in the process of ordering a us made handgaurd,what else could i do other than change the piston to help get my foreign parts count down? does the folding stock and pistol grip count as 1 or 2? I know the pro-mag counts as 3 and the handguard counts as 1, How many other parts do i need to change to b within the law? Any help will be great Thanx!

Thanx!

No its nots scraping a metal stripe off but it just scrapes a thin line down the side of the shell. So I should b ok?

When i pull the bolt back to put a round in the chamber ithe bottom of the bolt catches on the first shell. It scrapes the first shell on the way back before it gets behind the shell to strip it from the mag, has anyone had this problem or is that normal? Its my first rifle,LOL!

The following pic is what I mean. However, I did find out later that I only have to file down the raised surface on the left side of the picture (towards the rear on both sides), and file it down, taking off 1/8 of an inch of heighth down toward the floorplate. File that much area until it's flat with the rest of the magazine. I guess I'm saying you want to reduce how far up the ribbing reaches up towards the top of the magazine. You may have to file down the front raised ribbing, but I found out on mine, I didn't have to after all. Also, one more correction. The magazine does NOT hav

I just got my pro-mag in today and was wondering if u have any pictures so i can see exactly what you me by filing the rear raised surfaces on the sides of the mag ? thanx for the help

I just ordered a 30rnd pro-mag for my saiga will i have to put a bullet guide in my rifle before i can use the mag or do i have to mod the mag to make it work correctly? Thanx for any help!

I did tha same i couldnt find ow to put it in the cart to order maybe they have them on back order or something.

Okay, a couple of things to consider: 1) Make sure you buy a US version - not a Russian one - of that non-converted pistol grip and folding stock. The Russian one is not 922R compliant. You can get a US-made version from ACE Ltd. Here's the link: http://riflestocks.com/SaigaAK.htm 2) In order to install the G2 fire control group, you have to move the group forward (in other words, do the mod). The set up in the stock Saiga isn't the same. You could use the hammer from the G2 group and get one 922R part out of it. 3) Are you planning on using Saiga mags or standard AK mags? As far a

Okay, a couple of things to consider: 1) Make sure you buy a US version - not a Russian one - of that non-converted pistol grip and folding stock. The Russian one is not 922R compliant. You can get a US-made version from ACE Ltd. Here's the link: http://riflestocks.com/SaigaAK.htm 2) In order to install the G2 fire control group, you have to move the group forward (in other words, do the mod). The set up in the stock Saiga isn't the same. You could use the hammer from the G2 group and get one 922R part out of it. 3) Are you planning on using Saiga mags or standard AK mags? As far a

I like that pic alot! Where did you get the vented handguard?

Ok i'm very new to this so bare with me for a min. I want tha 30rnd mag an the folding stock with the pistol grip thats all one piece so i dont have to move the trigger forward,and i wanted to change the handguard,piston,hammer, single hook trigger and disconnector. Would that clear me as far as the 922.r ?And if i bought a us made mag would i still need to change the follower and base plate to b able to use the 30rnd mag and be in the clear of the 922.r?

If you use a US made mag what would u need to do to make a 30 rnd US mag work other tha the feed ramp?