DavePAL84 1 Posted February 20, 2007 Report Share Posted February 20, 2007 So I picked up a Saiga last thurs (2/15), did the basic conversion that evening and Friday (moved the trigger group, fabbed and installed a bullet guide) and test-fired it Friday afternoon. The front end still didn't look right so I began looking for a solution. Of course, I could press off my front sight and gas block, which is a PITA, so I began looking for other options. Most regular AKM gas tubes will fit .223 and 7.62x39 Saiga's, so I just used an extra that I had--fit with no problems. I didn't have the $$ for Dinzag's adaptor so I had to adapt and overcome. Don't get me wrong--if I had the money on hand I would purchase it outright but I simply don't, plus it helps that I'm a mechanical engineering major. No doubt his mount is of a much much higher quality than my cobbled together shit. So I took a spare handguard collar (left over from a pistol build), cut the top off with an angle grinder then widened the whole deal with a dremel tool so it would fit on a Saiga. Then I cut down the sides of the extension with a bench grinder. I found a little piece (from a FAL I think) that was threaded on one end to a metric #4 screw. I put the whole shabang on the rifle and it worked great--util the threads on the little FAL collar stripped (there's less than 1 full turn on it) so I backed it up with a nut. Here are pics from three angles: Anywho, the finishes don't match but since I'm going to Gunkote the whole thing so it won't matter for long. The screw will also be trimmed down a bit but honestly it's hard to tell. Here is the end result: Anywho, I hope this can save some of you guys some $$ to put towards magazines and ammo. Quote Link to post Share on other sites
dinzag 31 Posted February 20, 2007 Report Share Posted February 20, 2007 Nice improvising If you have a welder or know someone who does, tack weld them together. You could also possibly notch the top of the barrel to make a recess for the screw so the assembly won't slide forward. Quote Link to post Share on other sites
DavePAL84 1 Posted February 20, 2007 Author Report Share Posted February 20, 2007 Nice improvising If you have a welder or know someone who does, tack weld them together. You could also possibly notch the top of the barrel to make a recess for the screw so the assembly won't slide forward. Both good ideas! I only have a spot welder on had but I have a friend that does some welding work here and there. Also, a good idea with making a notch--I'm kind of concerned that the hadguard will force it's way forward during live fire. Quote Link to post Share on other sites
Bad Bob 0 Posted February 20, 2007 Report Share Posted February 20, 2007 (edited) So I picked up a Saiga last thurs (2/15), did the basic conversion that evening and Friday (moved the trigger group, fabbed and installed a bullet guide) and test-fired it Friday afternoon. How do you like the folding stock? I've got one on my .223 Saiga conversion (which, FWIW, includes 7 'compliance' parts ;>), and it's definitely 'growing on me' (in fact, I love it ;>)... I didn't have the $$ for Dinzag's adaptor so I had to adapt and overcome. Don't get me wrong--if I had the money on hand I would purchase it outright but I simply don't, plus it helps that I'm a mechanical engineering major. No doubt his mount is of a much much higher quality than my cobbled together shit. So I took a spare handguard collar (left over from a pistol build), cut the top off with an angle grinder then widened the whole deal with a dremel tool so it would fit on a Saiga. Then I cut down the sides of the extension with a bench grinder. I found a little piece (from a FAL I think) that was threaded on one end to a metric #4 screw. I put the whole shabang on the rifle and it worked great--util the threads on the little FAL collar stripped (there's less than 1 full turn on it) so I backed it up with a nut. Great idea! That part looks like an FAL sling swivel band. Gunplumber (at Arizona Resonse Systems: http://www.arizonaresponsesystems.com/ ) suggested at the FALfiles Forums (http://www.falfiles.com/forums/showthread.php?s=&threadid=21952) that the thread for the swivel band screw might be "#8x40" - but there are metric swivel bands, commonwealth swivel bands, and Israeli swivel bands, so I frankly don't know. FWIW, the metric FALs use many screws/bolts with an 'English' thread pitch (possibly a result of the US completely rebuilding European industry, at American taxpayers' expense, after WWII). Bottom line: the result looks great, the cost was right, and both speak highly of your WECSOG skills, Compadre! ;>) Edited February 21, 2007 by Bad Bob Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.