KC913 324 Posted July 7, 2008 Report Share Posted July 7, 2008 (edited) These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion. Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut. The images might look big, but they printed out at normal / actual size when I printed them. If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both: http://rapidshare.com/files/127778462/ak_p...e_templates.zip Edited July 7, 2008 by KC913 14 Quote Link to post Share on other sites
Knuckle Dragger 0 Posted April 8, 2009 Report Share Posted April 8, 2009 The template was PERFECT! Thanks a ton for having this available. I searched all over the board before finding this post. All of the videos and posts I was able to find talked about what to do-but not the measurements that I needed. Thanks again. These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion. Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut. The images might look big, but they printed out at normal / actual size when I printed them. If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both: http://rapidshare.com/files/127778462/ak_p...e_templates.zip Quote Link to post Share on other sites
Bucknakedracin 0 Posted April 10, 2009 Report Share Posted April 10, 2009 thats great. it should be a sticky. i just used a virgin ak receiver and scribed the hole. The template was PERFECT! Thanks a ton for having this available. I searched all over the board before finding this post. All of the videos and posts I was able to find talked about what to do-but not the measurements that I needed. Thanks again. These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion. Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut. The images might look big, but they printed out at normal / actual size when I printed them. If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both: http://rapidshare.com/files/127778462/ak_p...e_templates.zip Quote Link to post Share on other sites
jonblack 9 Posted April 12, 2009 Report Share Posted April 12, 2009 Will this work for all Saiga calibers? I have a Saiga 12 and need to cut a PG hole. jonblack Quote Link to post Share on other sites
Vance665 225 Posted April 23, 2009 Report Share Posted April 23, 2009 (edited) I just transferred the measurements from my SAR-1 and started cutting. Edited April 23, 2009 by Vance665 Quote Link to post Share on other sites
woodmann 0 Posted May 6, 2009 Report Share Posted May 6, 2009 Will this work on all S-12's? I think it will, but would like verification. Thanks in advance. Quote Link to post Share on other sites
wizard5000 1 Posted June 20, 2009 Report Share Posted June 20, 2009 (edited) These make it a little easier to mark and cut the pistol grip hole in the right spot, for anyone who doesn't have pistol grip holes already in their receiver during conversion. Line the holes up with the trigger hole on the bottom of your receiver. It's alot easier if you actually cut the holes out of the paper to line them up and trace where the pistol grip hole needs to be cut. The images might look big, but they printed out at normal / actual size when I printed them. If you can't view them, I zipped them both and uploaded them to rapidshare for anyone who wants to download them both: http://rapidshare.com/files/127778462/ak_p...e_templates.zip Thanks so much this is the kind of thing that makes a guy proud to be an American, all the help in the world and no charge Thanks paul Edited June 20, 2009 by wizard5000 1 Quote Link to post Share on other sites
wizard5000 1 Posted June 20, 2009 Report Share Posted June 20, 2009 Thanks so much for all the rely's I will let ya'll know the progress. DAM!!! it's great to live in America. paul Quote Link to post Share on other sites
KC913 324 Posted May 20, 2010 Author Report Share Posted May 20, 2010 These templates will work with the Saiga 12 as well. I just noticed some people asked and nobody verified it. I just used the template on a Saiga 12 I converted with no problems. All you're doing is lining up the trigger hole to cut a pistol grip hole in the proper place. It should work with any AK receiver that doesn't have a pre-cut PG hole. Quote Link to post Share on other sites
KC913 324 Posted January 5, 2011 Author Report Share Posted January 5, 2011 Bumping this just because it's useful. And why the fuck did "blades" -1 me on the original post? Re-uploaded the files to Rapidshare and Hotfile: http://rapidshare.com/files/440856978/ak_pistol_grip_hole_templates.zip http://hotfile.com/dl/94312962/7c3ce9f/ak_pistol_grip_hole_templates.zip.html Quote Link to post Share on other sites
DrThunder88 912 Posted January 5, 2011 Report Share Posted January 5, 2011 Cool, thanks! I don't know why anyone would -1 that post. I'll +1 it to undo the damage! 1 Quote Link to post Share on other sites
KC913 324 Posted January 19, 2011 Author Report Share Posted January 19, 2011 Cool, thanks! I don't know why anyone would -1 that post. I'll +1 it to undo the damage! 1 Quote Link to post Share on other sites
mrmallek 53 Posted February 7, 2011 Report Share Posted February 7, 2011 And I +1 ya again as I usedd this to line up my cuts to fix my MAA special Bumpitty Bump Quote Link to post Share on other sites
50bmg 0 Posted February 28, 2011 Report Share Posted February 28, 2011 i cant get the link to open up. thanks i have been looking for a hour on the web for this and this post pop up in a search. and i forgot i was a member here this might be my first post here i think. so dont flame to new guy to bad. Quote Link to post Share on other sites
KC913 324 Posted February 28, 2011 Author Report Share Posted February 28, 2011 (edited) I updated the links recently. You can always just click on the images and save them when they pop up. http://rapidshare.co...e_templates.zip http://hotfile.com/d...plates.zip.html Edited February 28, 2011 by KC913 Quote Link to post Share on other sites
quicken 4 Posted March 3, 2011 Report Share Posted March 3, 2011 (edited) thank you for that sir, helps us out big time. i can't seem to open the first picture though. vince @ msp fabrication Edited March 3, 2011 by quick Quote Link to post Share on other sites
KC913 324 Posted March 3, 2011 Author Report Share Posted March 3, 2011 thank you for that sir, helps us out big time. i can't seem to open the first picture though. vince @ msp fabrication Try it here: Quote Link to post Share on other sites
pjj342 632 Posted March 24, 2011 Report Share Posted March 24, 2011 Ill bet with less than an hour of work you could make a wood template that would work fine. Thats prob what im gonna do. I cant bear to buy a steel one for 40$. Thanks man, Good info. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.