Which Trigger group?

[volkov 318]

This seems like a dumbass question but I couldn't find the answer..

 

For the 5.45 what trigger group? Double or single hook?

 

or would any of these work?

 

 

http://store.carolinashooterssupply.com/servlet/-strse-118/SAIGA-AK-TAPCO-FCG/Detail

 

http://store.carolinashooterssupply.com/servlet/-strse-119/SAIGA-AK-TAPCO-FCG/Detail

 

http://store.carolinashooterssupply.com/servlet/-strse-138/TROMIX-SAIGA-TRIGGER-TAPCO/Detail

 

thanks and if this was a dumb post sorry! couldn't find it..

[saigafreake 27]

single hook tapco g2 is what you need so yes they will.

[Paulyski 2,227]

If you use a double hook, in addition to narrowing the side of the hammer to clear the BHO, you would need to notch out another notch on the underside of the reciever for the added hook of the double hook.

 

It is easily doable, I did it, but not too many people do it. It is extra work.

 

If you were to use the double hook, don't notch too far. Go a tiny bit at a time until the trigger pulls just enough to release the hammer.

 

EDIT: for absolute ease, Tromix mods a single hook G-2 so you can just drop it in without any grinding whatsoever.

 

That seems to be your 3rd link. They sell it with a shepherds crook, so that is what I would grab for sheer ease for my next conversion.

 

Don't forget that you will need a crook.

Edited November 30, 2009 by Paulyski

[volkov 318]

thanks guys apreciate the help

[Coal_forge 15]

So I assume by logical resoning that you went with 5.45?

[volkov 318]

good assumption haha