Nick White 5 Posted February 19, 2011 Report Share Posted February 19, 2011 I'm not asking how to do it, that's all over this forum, my questions is can someone post a picture of your S308 with a 22" barrel? 16" I've seen, but I want to see it with a 22". Or a Saiga lookin like a dragonov. Perferably wood, but synthetic is fine too. Quote Link to post Share on other sites
paprotective 362 Posted February 19, 2011 Report Share Posted February 19, 2011 (edited) Wood 'Drag' Stock and a Factory 308 Wood Hanguard.. & 3-9x40 scope.. with a small/cheap NCStar 6x32 scope (waiting for the new 4x12 scope)... *side note for you.. the cheek weld with the 'Drag' stock is lower than a standard AK style stock as my last scope EyeRelief was 4" and my cheek was more toward the TAIL of the 'Drag' stock.. (hence my change below to a LEVEL stock plane) and then Triangular Stock. 4-12x40 Bushnell Scope w/DOA w/BDC Reticle.. As far as ammo thus far.. Remington Corelokt 150gr.. is good for the $.. Hornandy TAP 110gr and Federal 168OTM are pretty good also.. Al Edited February 19, 2011 by YWHIC Quote Link to post Share on other sites
Nick White 5 Posted February 19, 2011 Author Report Share Posted February 19, 2011 That's a gorgeous stock. Where can I get one? I have a high rise scope mount, so I can't put my cheek on the stock now so that's no problem. That'd the first think I've heard about federal, but I'll give it a try. Thank you for the help. Quote Link to post Share on other sites
paprotective 362 Posted February 19, 2011 Report Share Posted February 19, 2011 (edited) Heres a link for a PSL swap. http://www.madwulf.c...4CStockSwap.htm Here is the ATI Poly set.. this will bolt on a converted Saiga or can be fitted to a PSL/Drag. http://www.centerfir...m/STKAKA01.aspx Here is a wood set.. (notice the rear CURVE though.. this is for PSL/Drag type receivers only) http://www.centerfir...tkdra-wood.aspx Would suggest GB or searching the web.. make sure the 'SQUARE' TANG is like.. After some sanding.. and a coat of minwax stain and matte clear.. Edited February 19, 2011 by YWHIC Quote Link to post Share on other sites
Nick White 5 Posted February 19, 2011 Author Report Share Posted February 19, 2011 Those are gorgeous. I think I might do that to the S308 Quote Link to post Share on other sites
Berzerker2 19 Posted May 23, 2011 Report Share Posted May 23, 2011 (edited) I'm not asking how to do it, that's all over this forum, my questions is can someone post a picture of your S308 with a 22" barrel? 16" I've seen, but I want to see it with a 22". Or a Saiga lookin like a dragonov. Perferably wood, but synthetic is fine too. Here's mine which I just finished. 21" barrel w/warsaw length Tapco stock Edited May 23, 2011 by Berzerker2 Quote Link to post Share on other sites
NickWhite 7 Posted July 23, 2011 Report Share Posted July 23, 2011 Is that the gaill hand guard or something like that? Dumb question, but with that stock can still have a swivel stud? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.