TonyRumore 1,332 Posted August 23, 2005 Report Share Posted August 23, 2005 I made up about a dozen of these flash hiders. They can be attached by bonding in place with red locktite or I can thread them 7/8-28. $49ea shipped. The smooth ended ones shown on the L/H side of the pic are $39ea shipped. Credit card orders are OK. They are currently in the white, but will be parkerized on Thursday and ready to ship. I also made a few to fit the Benelli M3 shotgun as well. http://www.hunt101.com/showphoto.php?photo=317168 Tony Rumore Tromix Corp www.Tromix.com 918 251-5640 e-mail TonyR@Tromix.com Link to post Share on other sites
detpat 0 Posted August 23, 2005 Report Share Posted August 23, 2005 is there any chance you can make one of the castellated ones for a high standard m10b thread? i don't know what the threads are, but if you tell me how i can find out. pat Link to post Share on other sites
TonyRumore 1,332 Posted August 23, 2005 Author Report Share Posted August 23, 2005 I would need you to measure the OD of the threads on the barrel and then check the thread pitch with a gauge. Once we have that, then I can get a tap and thread it. I could cut the threads with a single point cutter, but without something to check the fit, I would be hesitant to pull a one-off like that. Link to post Share on other sites
IndyArms 10,186 Posted August 23, 2005 Report Share Posted August 23, 2005 Call High Standard or whoever makes it...and ask them what OD and pitch the threads are?!?!?! Link to post Share on other sites
druganov 0 Posted August 27, 2005 Report Share Posted August 27, 2005 Hello, any chance you will make some for .410 guns. If so i am interested in the castel style thanks Link to post Share on other sites
McUZI 1 Posted August 27, 2005 Report Share Posted August 27, 2005 Call High Standard or whoever makes it...and ask them what OD and pitch the threads are?!?!?! <{POST_SNAPBACK}> That would be a superb idea if the company who made that gun hadn't been out of business for going on 25 years now... Link to post Share on other sites
Jaffa Killer 0 Posted August 28, 2005 Report Share Posted August 28, 2005 Yes,if you could make some for a 410 i'd definately be interested. Link to post Share on other sites
77hiboy 0 Posted August 28, 2005 Report Share Posted August 28, 2005 +1 on the 410 flash hider Tony Link to post Share on other sites
SAIGA12nut 0 Posted August 28, 2005 Report Share Posted August 28, 2005 Tony, Im sorry if this question has already been answered, but I am a bit hesitant on placing an order for one reason. Will your F/H fit onto an UNthreaded S-12 barrel that has been cut down to 18.2 inches? I guess im just a bit worried about the f/h flying off the end of my barrel during fire due to me not having any threading (but have ALOT of Red LocTite). Link to post Share on other sites
TonyRumore 1,332 Posted September 8, 2005 Author Report Share Posted September 8, 2005 (edited) I have had one on a 12" gun and it has over 500 rounds on it. It hasn't budged. I can make them for 20's and .410's if someone just gives me the OD of the barrel, both at the end of an uncut barrel, and in the middle where it would be cut down. Edited September 8, 2005 by TonyRumore Link to post Share on other sites
1liter 20 Posted September 9, 2005 Report Share Posted September 9, 2005 If you can get the thread size of the stock 19 inch barrel, put me in for one! Link to post Share on other sites
MadDog 3 Posted September 9, 2005 Report Share Posted September 9, 2005 (edited) THANKS TONY!! These are DA BOMB man! I just received one of the new style Flash Hiders and a bayo lug and AM IMPRESSED. Gentlemen if you want one DON'T WAIT. I'll get some picks up later... MadDog (DeWayne) Edited September 9, 2005 by MadDog Link to post Share on other sites
Recommended Posts