Seggah 1 Posted June 6, 2012 Report Share Posted June 6, 2012 Finally got a chance to remove the shroud off my saiga (7.62x39) and no threads whaaaa, not a problem. Anyway what are my options? Is my only option to go with 14x1LH? I mean if I can go a diff. route, why not? Quote Link to post Share on other sites
canoecanoe 63 Posted June 6, 2012 Report Share Posted June 6, 2012 (edited) Due to the barrel diameter, 14 is probably your only option. There are , however, thread adaptors to go from 14 to 24 or other. Check out CNC Warrior and AK-Builders for options.. Edited June 6, 2012 by canoecanoe Quote Link to post Share on other sites
Fallschirmjager667 729 Posted June 6, 2012 Report Share Posted June 6, 2012 or you could replace the entire fsb with an ak74 fsb that has 24x1.5mm threads Quote Link to post Share on other sites
mitchskill 6 Posted June 6, 2012 Report Share Posted June 6, 2012 how do you get the ak 74 front block on? hammer it on? Quote Link to post Share on other sites
themadhatter196 18 Posted June 6, 2012 Report Share Posted June 6, 2012 Hammer or press. Either will work if the tolerances are within .002in with each other. If not you could always polish the barrel journal like I did with some 600-800 grit wet or dry. I would highly recommend going and getting a 74' FSB with 24x1.5mm threads. Real 74' style brakes are much better than trapco's slant brakes. Quote Link to post Share on other sites
obiwanbonjovi 337 Posted June 6, 2012 Report Share Posted June 6, 2012 I recommend this thread adapter and an ak74 brake. http://www.cncwarrior.com/shop/24955-saiga-m24-muzzle-adapter/ this adapter is made specifically for threaded barrel saigas. Quote Link to post Share on other sites
Fallschirmjager667 729 Posted June 6, 2012 Report Share Posted June 6, 2012 I recommend this thread adapter and an ak74 brake. http://www.cncwarrio...muzzle-adapter/ this adapter is made specifically for threaded barrel saigas. his barrel is not threaded, if i were you i'd just replace the whole thing, that way you can use a bayonet with a 74 style brake if you want Quote Link to post Share on other sites
obiwanbonjovi 337 Posted June 6, 2012 Report Share Posted June 6, 2012 I recommend this thread adapter and an ak74 brake. http://www.cncwarrio...muzzle-adapter/ this adapter is made specifically for threaded barrel saigas. his barrel is not threaded, if i were you i'd just replace the whole thing, that way you can use a bayonet with a 74 style brake if you want oops missed that part. I agree then your best option is to replace fsb. Quote Link to post Share on other sites
Seggah 1 Posted June 7, 2012 Author Report Share Posted June 7, 2012 Wait wait wait hold up, you guys are going to fast. Anyway my plan is to get a can for my m1a, and use it on my saiga and also use it on my ar. Is that even posible? Quote Link to post Share on other sites
sowhat6565 20 Posted June 7, 2012 Report Share Posted June 7, 2012 you can get a cutter kit from dinzag to cut barrel down for ar threads. its about 140 but you will have your size Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.