ironhead7544 35 Posted December 3, 2005 Report Share Posted December 3, 2005 Where can I get an adjustment tool to fit the Saiga? I have a standard tool but the windage hole is too small to fit the Saiga front sight. Any ideas? Quote Link to post Share on other sites
G O B 3,516 Posted December 3, 2005 Report Share Posted December 3, 2005 If you need a tool to raise and lower the front sight, you could make one out of steel break line. My front sight from rusmil (S-12) came with a wrench that is a bent rod with a slotted hole in the end. It shouldn't be too hard to make. Also try Tantal, he has most anything AK. G O B Quote Link to post Share on other sites
ironhead7544 35 Posted December 3, 2005 Author Report Share Posted December 3, 2005 I have the regular tool and that will adjust for the elevation. The windage is the problem. I cant enlarge the hole for the pusher because it doesnt have enough metal. Quote Link to post Share on other sites
J A 0 Posted December 6, 2005 Report Share Posted December 6, 2005 Get a 3/16" punch and slip a fired 22lr shell over the end than whop it with a hammer. Quote Link to post Share on other sites
scoutjoe 276 Posted December 6, 2005 Report Share Posted December 6, 2005 Get a 3/16" punch and slip a fired 22lr shell over the end than whop it with a hammer. hehe...you said "whop" Quote Link to post Share on other sites
G O B 3,516 Posted December 7, 2005 Report Share Posted December 7, 2005 No no no. Being 1/2 Italian , I can tell you that a whop is only good for Carcano's and Beretta's. For Rushian weapons, beat it like the bitch burned the borsht! G O B Quote Link to post Share on other sites
gunslinger308 0 Posted December 8, 2005 Report Share Posted December 8, 2005 I have the same problem on my saiga and sight tool. I just thought of this and havn't tried it but what about holding a washer( thicker than the amount of adjustment needed and with a larger hole than the tool) between the hole side of the tool and the sight. THat should let the pin move. I will try to find my sight tool and look at this. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.