Jeric 0 Posted January 9, 2006 Report Share Posted January 9, 2006 (edited) Updated price and info... Magazine release lever extension, (or speed release lever). For the S-12* shotgun. *Will also work on other Saiga models! Not just the S-12. Thanks to Cobra for his input in this matter! NEW LOWER PRICE! $16 shipped CONUS Email or PM me for details. Jeric ps. A percentage of profits are always donated back to this forum! Edited April 20, 2006 by Jeric Link to post Share on other sites
mopeman 0 Posted January 9, 2006 Report Share Posted January 9, 2006 I would like one, but how does it attach? In the pic with the S-12, it looks like it has a tac weld on it, but you show it with screws? How much more will shipping be to AK? Link to post Share on other sites
Jeric 0 Posted January 9, 2006 Author Report Share Posted January 9, 2006 No shipping charges. It just makes things easier! The one in the photo is actually screwed on, from the back, and then the screws are filed flush with the front of the lever. These can be welded on, you just have to file/sand off the powder coat and you're good to go. Jeric Link to post Share on other sites
icarus 3 Posted January 13, 2006 Report Share Posted January 13, 2006 No shipping charges. It just makes things easier! The one in the photo is actually screwed on, from the back, and then the screws are filed flush with the front of the lever. These can be welded on, you just have to file/sand off the powder coat and you're good to go. Jeric PM sent. These are pretty kickass. I'm surprised there are so few posts. Link to post Share on other sites
Cobra 76 two 2,677 Posted January 13, 2006 Report Share Posted January 13, 2006 Lookin good Jeric. So you just have to drill two holes in your mag catch and screw it right on? Link to post Share on other sites
Jeric 0 Posted January 13, 2006 Author Report Share Posted January 13, 2006 Lookin good Jeric. So you just have to drill two holes in your mag catch and screw it right on? Thanks dude! Yes, drill two holes, tap, screw it! Here's a pic of what it would look like if you screwed it from the front. This can be done, but it more possible for the mag to catch on the screws as it's being ejected, even though they're low profile heads. Screwing from the backside (always a favorite), will guarantee that won't happen. Instructions are available too, as a PDF file, and will be posted on my website for downloading. Jeric Link to post Share on other sites
Jeric 0 Posted January 24, 2006 Author Report Share Posted January 24, 2006 The instructions are now posted on the website... www.warfieldarmory.com/PDF/SRL_Instructions.pdf Link to post Share on other sites
Cobra 76 two 2,677 Posted January 24, 2006 Report Share Posted January 24, 2006 Alright man! Nice site. I will get one done and post pics soon. Link to post Share on other sites
Cobra 76 two 2,677 Posted February 8, 2006 Report Share Posted February 8, 2006 Pics as promised! Great product!! Link to post Share on other sites
Jeric 0 Posted February 9, 2006 Author Report Share Posted February 9, 2006 Sweet Cobra! Thanks for the pics. Glad you like it man. Link to post Share on other sites
Jeric 0 Posted April 20, 2006 Author Report Share Posted April 20, 2006 Bumped... new price. Link to post Share on other sites
glock_forty5 0 Posted April 27, 2006 Report Share Posted April 27, 2006 Pics as promised! Great product!! Free bump, purchase questions inbound. Link to post Share on other sites
-C4- 0 Posted April 27, 2006 Report Share Posted April 27, 2006 Pics as promised! Great product!! Free bump, purchase questions inbound. Tagging for later. Link to post Share on other sites
jensenelet 0 Posted April 29, 2006 Report Share Posted April 29, 2006 Updated price and info...Magazine release lever extension, (or speed release lever). For the S-12* shotgun. *Will also work on other Saiga models! Not just the S-12. Thanks to Cobra for his input in this matter! NEW LOWER PRICE! $16 shipped CONUS Email or PM me for details. Jeric ps. A percentage of profits are always donated back to this forum! how do i buy one jensenelet@aol.com Link to post Share on other sites
kresk 10,063 Posted April 29, 2006 Report Share Posted April 29, 2006 jensenelet- "how do i buy one jensenelet@aol.com" Go to top of this page. Click on the 'Jeric" name and you will see buttons to email or personal mail (PM) him for further details. Link to post Share on other sites
Jeric 0 Posted June 27, 2006 Author Report Share Posted June 27, 2006 bump Link to post Share on other sites
PogueMahone 0 Posted July 21, 2006 Report Share Posted July 21, 2006 sweet jeebus, looks like i'll be getting a few of these along with the lrbho! Link to post Share on other sites
Conju 2 Posted October 24, 2006 Report Share Posted October 24, 2006 Any plans for making an ambidextrious or left handed version? Link to post Share on other sites
Conju 2 Posted October 25, 2006 Report Share Posted October 25, 2006 Link to post Share on other sites
Jeric 0 Posted October 26, 2006 Author Report Share Posted October 26, 2006 Any plans for making an ambidextrious or left handed version? Not at the moment, just because of some other projects that are taking most of my time. I'm sure I will tackle a left handed version next time I do a run of these, but not for a little while. I think Red Star Arm makes an ambidextrious version... J Link to post Share on other sites
khadre 0 Posted February 26, 2007 Report Share Posted February 26, 2007 Any plans for making an ambidextrious or left handed version? Not at the moment, just because of some other projects that are taking most of my time. I'm sure I will tackle a left handed version next time I do a run of these, but not for a little while. I think Red Star Arm makes an ambidextrious version... J Wouldn't the lever be adaptable for left-handed if you just flip-it over and use it that way? Link to post Share on other sites
Jeric 0 Posted February 27, 2007 Author Report Share Posted February 27, 2007 Wouldn't the lever be adaptable for left-handed if you just flip-it over and use it that way? Well, you could, but bear in mind the fact that the bends in the lextension are angled to account for the angle of the mag release lever itself to keep the extension parallel with the receiver. Put it on the left side and it will angle up into the receiver. J Link to post Share on other sites
khadre 0 Posted March 5, 2007 Report Share Posted March 5, 2007 Wouldn't the lever be adaptable for left-handed if you just flip-it over and use it that way? Well, you could, but bear in mind the fact that the bends in the lextension are angled to account for the angle of the mag release lever itself to keep the extension parallel with the receiver. Put it on the left side and it will angle up into the receiver. J Roger that...thanks for pointing that out. Look forward when and IF you will be coming out with an Ambi-dextrous or Lefty version. Link to post Share on other sites
khadre 0 Posted April 15, 2007 Report Share Posted April 15, 2007 Any plans for making an ambidextrious or left handed version? Not at the moment, just because of some other projects that are taking most of my time. I'm sure I will tackle a left handed version next time I do a run of these, but not for a little while. I think Red Star Arm makes an ambidextrious version... J Jeric, I don't see anywhere on RSA on the Ambi-version you mentioned? Could it be some other parts? Anyway, would love to be able to get an Ambi-version if you can make one. thnx. Link to post Share on other sites
whatmanual 44 Posted April 17, 2007 Report Share Posted April 17, 2007 I found it... http://www.redstararms.com/ Just on the top of the page -use the search feature. Look for: release you'll find it. ~S Link to post Share on other sites
striker754 0 Posted April 17, 2007 Report Share Posted April 17, 2007 I have one of these extensions for sale. It doesnt fit on my saiga. Link to post Share on other sites
bugeye 2 Posted April 18, 2007 Report Share Posted April 18, 2007 Pics as promised! COBRA!!!!! I want to know where I can get one of those wicked cool see through magazines. Damn if they arn't the best looking mags I have ever seen!! Where....where.....WHERE!!!!!!! Link to post Share on other sites
khadre 0 Posted April 18, 2007 Report Share Posted April 18, 2007 (edited) I found it...http://www.redstararms.com/ Just on the top of the page -use the search feature. Look for: release you'll find it. ~S Thanks, I found it but I thought it was for the Saiga 12, but looks to work only on the Saiga rifle, not Saiga 12 shotgun as I was hoping. Jeric, PLEASE make an AMBI-version, soon! Yours looks so much better! Edited April 18, 2007 by khadre Link to post Share on other sites
Cobra 76 two 2,677 Posted April 18, 2007 Report Share Posted April 18, 2007 (edited) COBRA!!!!! I want to know where I can get one of those wicked cool see through magazines. Damn if they arn't the best looking mags I have ever seen!! Where....where.....WHERE!!!!!!! Found it at the bottom of a box of lucky charmz...lol. Seriously though, I cut the window out with a dremel and made a lexan cover for it from an ice maker box. Edited April 18, 2007 by Cobra 76 two Link to post Share on other sites
bugeye 2 Posted April 18, 2007 Report Share Posted April 18, 2007 Even an innocent ice maker is not safe around you when you have a Dremel in your hand! Perhaps its Dremels that should be outlawed?? Wicked cool job, Bro! Awesome job! Your work is always meticulous and unique. Link to post Share on other sites
Recommended Posts