originalnj spetznas 4 Posted March 24, 2014 Report Share Posted March 24, 2014 I have an ATI stock And now i want to buy a Saiga 7.62x39mm. Here in Switzerland, there are only Saigas with factory-Folding stocks aviable like this (look at the silver button on the left of the stock): Now my question is: Can i put the ATI Gunstock on a Saiga with this factory-folding Stock? Because in the uploaded picuture, you see a converted factory-folding Saiga (Look again at the silver button) with an M4-Style gunstock. Will this also work with an ATI Gunstock? Quote Link to post Share on other sites
SaigaFL 4 Posted March 25, 2014 Report Share Posted March 25, 2014 Darned if I know , uncharted terrority. Quote Link to post Share on other sites
MAAnew 162 Posted March 25, 2014 Report Share Posted March 25, 2014 Wish we could trade Saigas. I would rather have the stock that you have. I wish I could tell you, but it would violate ITAR. If you search google, you should be able to find an answer in the public domain. I have an ATI stock And now i want to buy a Saiga 7.62x39mm. Here in Switzerland, there are only Saigas with factory-Folding stocks aviable like this (look at the silver button on the left of the stock): Now my question is: Can i put the ATI Gunstock on a Saiga with this factory-folding Stock? Because in the uploaded picuture, you see a converted factory-folding Saiga (Look again at the silver button) with an M4-Style gunstock. Will this also work with an ATI Gunstock? Quote Link to post Share on other sites
JoeAK 337 Posted March 25, 2014 Report Share Posted March 25, 2014 I don't know why anyone would want to trade a 100 folder for an ATI, but if you want a collapsing stock, you might have someone handy with a mill make an adapter for an AR buffer tube. Quote Link to post Share on other sites
Fishbed77 3 Posted April 2, 2014 Report Share Posted April 2, 2014 Can i put the ATI Gunstock on a Saiga with this factory-folding Stock? Gross. Why would you ever want to do that? The polymer side-folder is far and away superior to that ATI stock. Quote Link to post Share on other sites
Inebriated 31 Posted April 2, 2014 Report Share Posted April 2, 2014 Can i put the ATI Gunstock on a Saiga with this factory-folding Stock? Gross. Why would you ever want to do that? The polymer side-folder is far and away superior to that ATI stock. This. That ATI is nowhere as nice as the factory Russian folder. Quote Link to post Share on other sites
Kuto 0 Posted July 1, 2014 Report Share Posted July 1, 2014 I have the metal skeletor type folding stock and would like to swap to the polymer factory stock in the first post, anyone know if it would fit and where I could get my hands on one? Quote Link to post Share on other sites
Matthew Hopkins 1,065 Posted July 1, 2014 Report Share Posted July 1, 2014 (edited) I have the metal skeletor type folding stock and would like to swap to the polymer factory stock in the first post, anyone know if it would fit and where I could get my hands on one? welcome to the board it all depends on what country of manufacturer of rear trunion and stock you have on it now that will determine which Ak-100 series stock will fit it, Russian or Bulgarian. although they both look the same the huge difference is the pin size and the angle of the of the hinge. off hand I think the Bulgarian is 4.5mm with 4 degree and the Russian 5.5 with 6 degree, but I could be wrong, which I'm sure someone here will correct me. in any event take the pin out and measure it, then go the K-var sight and find the AK-100 series stock for that pin length. Edited July 1, 2014 by Matthew Hopkins Quote Link to post Share on other sites
Kuto 0 Posted July 1, 2014 Report Share Posted July 1, 2014 I have the metal skeletor type folding stock and would like to swap to the polymer factory stock in the first post, anyone know if it would fit and where I could get my hands on one? welcome to the board it all depends on what country of manufacturer of rear trunion and stock you have on it now that will determine which Ak-100 series stock will fit it, Russian or Bulgarian. although they both look the same the huge difference is the pin size and the angle of the of the hinge. off hand I think the Bulgarian is 4.5mm with 4 degree and the Russian 5.5 with 6 degree, but I could be wrong, which I'm sure someone here will correct me. in any event take the pin out and measure it, then go the K-var sight and find the AK-100 series stock for that pin length. Thanks Matt! I know mine was made in russia....izmash..... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.