BrutalGardener 205 Posted June 26, 2014 Report Share Posted June 26, 2014 Hi guys, I have always kind of wanted to get a 12 round "nutsack" drum for my S-12. Saw one on sale at Cabela's and picked it up. Long story short: after I've appropriated it and threw away the packaging and receipt, I discovered that it's actually a 10 round drum! I had not idea that they made these! Any way, I've now picked up a 12 rounder at an LGS and instantly noticed that it's EXACTLY the same size as the 10 rounder. WTF is the point of 10 rounders, anyhow?!? Legality in some states? So, the question is, since they are the same size, might it be possible to mod the 10 rounder to take the extra two rounds? Thanks! Quote Link to post Share on other sites
Matthew Hopkins 1,065 Posted June 26, 2014 Report Share Posted June 26, 2014 (edited) cut off the existing feed tower, and putting a slightly longer feed tower on it, using a cut down S12 mag as the new tower, that is doable, the problem I see with that, is that the spacer shell still might not push up the last shell up to the feed lips. be easier to sell it off if you don't want it. Edited June 26, 2014 by Matthew Hopkins Quote Link to post Share on other sites
BrutalGardener 205 Posted June 26, 2014 Author Report Share Posted June 26, 2014 cut off the existing feed tower, and putting a slightly longer feed tower on it, using a cut down S12 mag as the new tower, that is doable, the problem I see with that, is that the spacer shell still might not push up the last shell up to the feed lips. be easier to sell it off if you don't want it. Thanks. WTS add posted. Quote Link to post Share on other sites
csspecs 1,987 Posted June 26, 2014 Report Share Posted June 26, 2014 Huh? I thought it was just pinned or had an extra dummy round in it. Quote Link to post Share on other sites
pedal2alloy 206 Posted June 26, 2014 Report Share Posted June 26, 2014 cut off the existing feed tower, and putting a slightly longer feed tower on it, using a cut down S12 mag as the new tower, that is doable, the problem I see with that, is that the spacer shell still might not push up the last shell up to the feed lips. be easier to sell it off if you don't want it. But the 10 and 12 both have the same size feed tower, so the 10 must be restricted internal Quote Link to post Share on other sites
Matthew Hopkins 1,065 Posted June 26, 2014 Report Share Posted June 26, 2014 (edited) cut off the existing feed tower, and putting a slightly longer feed tower on it, using a cut down S12 mag as the new tower, that is doable, the problem I see with that, is that the spacer shell still might not push up the last shell up to the feed lips. be easier to sell it off if you don't want it. But the 10 and 12 both have the same size feed tower, so the 10 must be restricted internal not necessarily, it very well could be that the spacing for the shells "cradles" on the inner is slightly further apart. it wouldn't have to be a tremendous amount of spacing, just a small bit that would be enough to limit it to 2 less shell Edited June 26, 2014 by Matthew Hopkins Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.