inparidel

Just FYI. . .both 62 and 55 work real well in the S-.223 (almost the same, which lends to the conclusion that it is close to 1 in 9). I find that match, or my handloads, in 55 gr. work best. "Best" equates to 2 MOA in my S-.233. I hope that helps.

WAG??? PLease interpret. I suspected that a '74 pin MIGHT be able to be modded to work. Have you any real-world inf on that? Thanks.

Gentlemen: I don't know if this topic has been done to death or not, but. . .Cobra (buddy) or anyone else: What firing pin on the AK market is a viable replacement for the Saiga .223 pin. I have just found out ( in the middle of a match, no less) that mine is toast and won't strike a primer sufficiently anymore. It is not broken, but after 20,000 + rounds and many, many won matches, the pin is worn out and too short to properly strike the primers. PLEASE anyone let me know of a source for the pins, or a substitute, even if some filing is required. Thanks much.

Stick with your Orlites. The Weigers require your mag latch to be ground. Some folks grind just enough to get the Weigers to fit, which leaves them with loose (but functional) Orlites.... Have fun. Slightly wrong. The mag catch stays as is, but either the mag gets a trim to allow it to fit under the extended bolt lugs (a charming way of making a non-high-cap importable gun), OR grind the aforementioned lugs to what amounts to normal, bulgy or SAR 3 height, which is what I did (the latter) so all my .223 mags fit all my .223 AKs (Romy, Bulgy, Russian, etc.). I have posted pi

Thanks bro. But I have not exceded the size you mentioned, and I cannot figure out to save my life how to post on photobucket. I have an account, but there is NO link for "upload." So, I can't figure out how to upload without a link. Thanks though. If you can help, please do. Thanks much

Hey, Cobra. . .or whomsoever, I have been trying to upload pics to my own album, but the pics won't upload. It's been a while since I have been on the forum, so. . .is there something I need to do that I didn't a year ago? I click on the "add image" button, the I select the image from my computer, and then, after a bit of a wait, I get a blank page and no image was uploaded. Has the process changed? I apologize for posting this dipzoid post here, but I could not find a link for such problems. Please help. Thanks bros.

The linkage supported trigger that comes on an "as is" S-12 is really mushy and not conducive to competitive performance shooting such as myself and many people here do. If you just want it for hunting or home defense, then leave it as is, but if you do IPSC and other run-and-gun stuff, you can improve it greatly with a conversion.

If you don't mind a little grinding and fitting, I am working on a rail I modified from a mini 14 rail I had to remove the gas block and gas tube, then fit the gas tube inside the rail by grinding out an area for the site block to fit into, and the end of the rail for the cover to fit under as well, then leave the gas tube in the rail, slide them both on and refit the gas block. Its on and off with the gas block a few times but for a hundred dollar rail , I like it I am also thinking of using an old scope ring to clamp the front of the rail to the gas piston area I '

It's fine to remove any marks except the serial number. So far, so good man! She's coming together nicely. You may want to do some research on that forward latch. The S-12 is different where the trunnion and magwell area is concerned. From what I understand, it doesn't just drop right in, you have to do some custom work on the latch itself. There is a thread about that somewhere in here with good pics and details. Cobra: What's up guy? I hope all is OK with you. Long time no visit the site, but. . regarding your response to this guy. . .I am pretty near completely certain that