Jump to content

hawaii five-0

Member
 View Profile  See their activity

  • Content Count

    20

  • Joined

  • Last visited

 Content Type 

Everything posted by hawaii five-0

  1. hawaii five-0
    I want to remove the scope rail from my Saiga 12.Pretty useless to have on a shotgun.My question is,do you think its critical as far as adding strength and rigidity to the receiver?I wouldn't be worried with any other AK,but with the 12 gauge it seems like it asking alot of that sheet metal receiver.Thanks
  2. hawaii five-0
    Installing a BG from CSS.Do I push it all the way forward so it contacts the inside of the trunion,or have it a little closer to the magazine?Gregg isn't answering the phone at CSS today...
  3. hawaii five-0
    Gonna do a bullet guide install and was wondering if anyone has had problems with theirs coming loose or stripping out.How about welding it in?
  4. hawaii five-0
    I welded a little stop on the right side trigger leg.Rock solid stop,and since it's internal,You can never tell it was ever a problem.
  5. hawaii five-0
    I received the new spring yesterday.No rust.Time will tell how it works,but AGP seemed eager to take care of it.Also they paid for return shipping of the shattered spring.I'll give it another try...
  6. hawaii five-0
    Opened a fairly new(3 months-15 loadings) AGP magazine this AM to find the spring broken into 11 pieces.Some rust powder as well.AGP will replace the spring,but it does leave an impression.
  7. hawaii five-0
    Yeah
  8. hawaii five-0
    Fire one shot,then take the top cover off to see if the hammer is reset.There can be interference between the hammer and any bolts/nuts you used to install the trigger guard.You can check this at home by dry firing the weapon and, while holding the trigger down,cycle the action and see if the hammer stays back.
  9. hawaii five-0
    I saw there was an extensive thread on calguns on this topic
  10. hawaii five-0
    Lyman makes a couple molds as well.
  11. hawaii five-0
    Codebrown,I have used the Lee 1oz slugs.The load info that comes on the instructions is great and will work in the drum fine.W AA12 wads over Herco or blue-dot will get you 1590-1690fps.
  12. hawaii five-0
    I got a 1oz slug mold from Lee precision for $27.00.Had a pile of free lead,so I went to town casting slugs.My local trap range lets me have all the hulls I want for free,so all I gotta buy is powder,wads,and primers.For around 16-18 cents a pop I'm pushing slugs at 1690 fps.What fun....
  13. hawaii five-0
    I'm sure you all know it already,but just had to give Gregg props for his customer service.Above and beyond.Thanks!
  14. hawaii five-0
    Anyone?
  15. hawaii five-0
    I saw a guy with an all black T shirt that had the Saiga logo(weird writing with arrow pointing up)on the front.Where do I get it?
  16. hawaii five-0
    The safety on saiga 12's over travels when coming back to the safe position.This leaves the chance for dust to enter the receiver.Is there a quick fix for this?
  17. hawaii five-0
    I need a link to the instructions for installing the bolt hold open.I tried the search engine,however it doesn't seem real great.Thanks
  18. hawaii five-0
    I am converting my s-12 today and can't seem to find a link to the diagram that shows the measurements for the mods.I've seen it a million times,but now I can't find it.Thanks
  19. hawaii five-0
    Thanks guys.That was exactly what I wanted to know.The factory handguard for rifles looks way better than the shotgun one to me.
  20. hawaii five-0
    I saw a picture of a SBS on Dinzags site that had a rifle type forend.Looked awesome.Anyone done it?
×
×
  • Create New...