fritzthemoose

shooting 2 types both 28g so 1oz with one having 1300 and the ohter one having 1380fps

Joshua, what do you mean with the fronts traveling out with the rear. I have this issue with not going into battery

Funny thing is I did test it for 150 rounds in our shooting cellar. No issues. First 4 Stages in the morning. No issues From the 5th to the 8th stage it got worse and worse although I cleaned it twice in between Dismanteled it completely in the hotel, cleaned it lubed it and first stage next day as mentioned above 30 to 40% not closing. Stopped the match. On the way home stopped at our shooting cellar. Got the gun out of the car shot 50 rounds without issue. Shot another 50 with 3 not closing. No idea why but the temperature difference between the cellar and outdoor which is be

Thats what I thought too. So I am cleaning every 3 stages or so. Did clean it next stage it happened again. Did completely dismantel it in the hotel cleaned it and lubed it. First stage the next morning 30 to 40% not closing. Gun was completerly clean.

Anyone has them too? I used to have shortstrokes a lot. Changed to a weaker spring problem solved. But not I have closing problems. Bolt will fall short of closing just a little bid. Pulling trigger, trigger falls and of course nothing happens. Funny thing is that it happens after 4 stages or so. No problems in the first 4 stages but then something like 1 in 3 or 4 rounds. Its not a cleaning problem tested that. Gun is oiled. Not a problem of parts brushing each other either. Only explanation I have is outside temperature as in the cellar it works in the morning it works to

no did not do it but good idea. However, I did shoot more or less hole on hole whereever the impact was so dont think its me. But can try yes. Moving the dot is also worth a try.

sorry not familiar with that term. What is it?

If its just heat I am a little bid surprised that it already comes after lets say 30 rounds. But then again normally I start cold at a stage and it would therefore only affect the last rounds and then only if they are long distant slugs on a small target. If its the locking nut I just thigten it every 3 stages or so and before a slug stage. Was just wondering if anyone else has experienced the same. I do have a XN model with a full metal lower too but its not yet running meaning the first matches this year will have to be with the old one. Next week is Venice Shotgun Match and ther

Hi, for quite some time I infrequently have a shift of zero. I did some testing and checking and the reddot is fixed. As I am using a reddot I dont think its a paralax error which I could not explain on the short shotgun distances anyway. It is not removing the barrel as I did it serval times put it back in and no appearant shift of zero. However, after shooting like 25 to 30 rounds in quick successin simulating a long course the shots are shifting low and right. More right than low. On 20m like 3cm low and around 5 right. Not so much a problem when shooting bird buck o

if its pre-xn gp rifle in sweden is doing locking blocks. had one of mine break too and got it from them. gustav is a nice guy just google gustaf person rifle. or xn-arms directly got all my parts within a week two tops but I am in Austria so might take longer in the US. Not sure if you require import permit tho. I dont at least not for parts like that.

Just get them from Turkey. I had the locking block break at a match this year. Took around a week to get replacement from Turkey in this case for free. OK I am in Europe so things are easier but just try it why not also in the US unless some US regulation prevents you from importing a bolt.

Hi, I do have some cycling issues for quite some time. Originally I was using the factory main spring and the gun was running perfect for around 4 ot 5 stages meaning 50 to 70 rounds. Then it was starting to shortstroke around 3 to 4 rounds out of 10. More or less unshootable from that moment on. The same thing happend over and over again and always around at the same round count. With harder loads it was the same just a few rounds later. I have to say that I am using a middbarrel and I did open the gasports so that its running with 28g. Then I changed to the weaker spring. Fro

Topic withdrawn

Is it for the XN or pre XN?

I know there was a thread about it but cannot find it. is the lower from the old mka and the xn the same? Meaning can I put the xn barrel and so forth into an old receiver if i change the guide rod too?

open up the gasports

holding it loose kills the impuls

Thats pretty much how they come here out of the box. A kind of muzzle break and a choke but the choke is like close to 5 inch long so far too long. they dont even say which choke it is but from what I meassured its a modified

what do you want to see? its the same gun like in the states just with an outside thread at the end of the muzzle and not an internal one So far I don't think we can get replacement barrels for the MKA1919 here in the states. Is the situation the same in Austria and Sweden? Bill not sure have never asked for one yet but I guess it should not be a problem as they are coming out of Turkey. Might take ages tho I guess.

like jim wrote depends on what u want to do with it. i for my part am going for ipsc with it and there u are in open with a box magazine gun. so without modding it its a lost cause in a competition

u are right i contacted a friend in sweden and he has an internal one too. here in austria and around austria all have external ones. no idea why. i guess i will have to go somewhere where they can measure the thread and then try to find a choke that works and if not buy a saiga one and have it rethraeded

Fritz is "on the other side of the pond". Cutting and re-threading the barrel might be a good idea as long as it does not make the barrel too short for his local laws & regulations. Depending on his location, he might have a good chance at purchasing a stock barrel with internal choke threads. Bill it would get too short yes barrel has to be 45cm at least but I guess it would be easier to take a Saiga choke and rethread it. on the ohter hand i am sure there are correct chokes out there just need to know which thread

yes like saigas but the saiga one is a different thread so does not work Sounds like the European version of the shotgun (per rumors, I've never seen a picture of one). Have you contacted RAAC or checked the internet for any European parts suppliers? If chokes are not available, maybe (just maybe) RAAC will exchange barrels. Also, where did you get this? Just curious. Bill I am on the other side of the pond and we have only this model here at least i have never seen one with internal thread here in europe. bad thing is that no one seems to know what thread it is not

yes like saigas but the saiga one is a different thread so does not work

i think u missunderstood me. there is an external thread on the front end of the barrel like for example you have with an ar15. there is no internal thread in the barrel. so what i need is an external choke and for that i would need to know which thread it is in order to get the correct choke