Archael 0 Posted July 27, 2007 Report Share Posted July 27, 2007 Which one of these would work for the Saiga 308? Will it require the large or small or will either work? Would you reccommend this or opt for the press on gas block sight from Krebbs. Quote Link to post Share on other sites
nalioth 405 Posted July 27, 2007 Report Share Posted July 27, 2007 (edited) Those aren't ACE clamp on front sites. Those are custom gas blocks from Krebs Custom. You'll have to mike your barrel and see if those will fit. These are the ACE clamp on front sights. They clamp on to any gas block. All clickable Edited July 27, 2007 by nalioth Quote Link to post Share on other sites
RangerM9 1 Posted July 27, 2007 Report Share Posted July 27, 2007 Think i'm going ot go with the ACE clamp on myself - my FSB seems to be a bit canted....thought it wasn't but it is....shit....oh well....so i think i'll go with one of those ACE units and trim my barrel down a bit (it is the 21 inch version) then thread Quote Link to post Share on other sites
Archael 0 Posted July 28, 2007 Author Report Share Posted July 28, 2007 (edited) re-read my post...i have a link to the ACE clamp on sight and if you read the whole thing i mentioned the ones i posted a pic of were Krebbs. My question was which ACE clampons worked for the 308 ACE offers two sizes. Edited July 28, 2007 by Archael Quote Link to post Share on other sites
Archael 0 Posted July 31, 2007 Author Report Share Posted July 31, 2007 Hello!? anybody. Would SOMEBODY read my first post and answer my question? Quote Link to post Share on other sites
nalioth 405 Posted July 31, 2007 Report Share Posted July 31, 2007 (edited) Please read my first response. I DID answer your question. You'll have to measure (mike is short for 'use a micrometer on it') your barrel and choose the gas block that has the corresponding ID. Krebs lists the internal measurements for the two sizes. If neither is right, you may have to a) turn your barrel down or shim it up or c) go with the clamp on style. Edited July 31, 2007 by nalioth Quote Link to post Share on other sites
greatmoose 4 Posted July 31, 2007 Report Share Posted July 31, 2007 (edited) The ACE sight you'll need is the small-block version. I have one on my S308, and it fits perfectly. There's actually tow versions floating around, one as pictured, and the other has countersunk (flush) mounting screws and a "split" (AK style) sight housing. That's the one I have. Hope that helps. Edited July 31, 2007 by greatmoose Quote Link to post Share on other sites
buckandaquarterquarterstaff 5 Posted August 2, 2007 Report Share Posted August 2, 2007 (edited) Those aren't ACE clamp on front sites. Those are custom gas blocks from Krebs Custom. You'll have to mike your barrel and see if those will fit. These are the ACE clamp on front sights. They clamp on to any gas block. All clickable Cool, I like it. Thx Edited August 2, 2007 by buckandaquarterquarterstaff Quote Link to post Share on other sites
Archael 0 Posted August 7, 2007 Author Report Share Posted August 7, 2007 The ACE sight you'll need is the small-block version. I have one on my S308, and it fits perfectly. There's actually tow versions floating around, one as pictured, and the other has countersunk (flush) mounting screws and a "split" (AK style) sight housing. That's the one I have. Hope that helps. excellent. Thank you. I knew someone had to have done this before and would know. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.