saigafreake 27 Posted May 8, 2008 Report Share Posted May 8, 2008 Wats the best way to remove the 2 welds holding the plate that covers the correct trigger location. Quote Link to post Share on other sites
engbob 0 Posted May 8, 2008 Report Share Posted May 8, 2008 Get you a Dremel and just grind it, that's what i did. A Dremel is an amateur Gunsmiths best friend. That or you can just get some files and a touch of tendonitis Quote Link to post Share on other sites
saigafreake 27 Posted May 8, 2008 Author Report Share Posted May 8, 2008 Dremel after the plates off or b4 Quote Link to post Share on other sites
engbob 0 Posted May 8, 2008 Report Share Posted May 8, 2008 you need them off before you can remove it right? just take the heads of the rivets off, then you should be able to "pop" the plate off Quote Link to post Share on other sites
saigafreake 27 Posted May 8, 2008 Author Report Share Posted May 8, 2008 It wasnt sure if it would pop off with out welds removed Quote Link to post Share on other sites
shaneman153a 39 Posted May 8, 2008 Report Share Posted May 8, 2008 Wedge a cold chisel in between the plate and the receiver and give her a whack, then dremel what's left of the welds. Works like a champ. Quote Link to post Share on other sites
SOPMOD 254 Posted May 8, 2008 Report Share Posted May 8, 2008 It wasnt sure if it would pop off with out welds removed I thin mine at the welds from the outside of the plate with the dremel then pop the whole plate off with a cold chisel to avoid cutting into my receiver then I use a fine flat file to take the spot weld humps flat. Quote Link to post Share on other sites
LKB3rd 0 Posted May 8, 2008 Report Share Posted May 8, 2008 The two spot welds in the middle part of the plate can be partially drilled with a carbide bit, before prying it off when they are mostly drilled out. Quote Link to post Share on other sites
saigafreake 27 Posted May 8, 2008 Author Report Share Posted May 8, 2008 Thanks for the info guys. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.