BellaCorse 4 Posted January 31, 2013 Report Share Posted January 31, 2013 I'm new to all this so be gentle. Am I missing something or is the stock MKA-1919 pistol grip an intregral part of the lower and not a separate bolt-on component? And being that the case I suspect, how does one install an aftermarket grip with the adaptor blocks offered? Do they slip over the stock grip or is surgery involved? /M Quote Link to post Share on other sites
Trappnguns 1 Posted January 31, 2013 Report Share Posted January 31, 2013 Surgery... It gets cut off leaving a space for your adapter to protrude from Quote Link to post Share on other sites
KIRCH76 12 Posted January 31, 2013 Report Share Posted January 31, 2013 (edited) Matt from tooth and nail armory has a video up on YouTube about cutting the stock and the grip off. He also sells both adapters. Edited February 1, 2013 by KIRCH76 Quote Link to post Share on other sites
toothandnail 275 Posted January 31, 2013 Report Share Posted January 31, 2013 First one I cut was NERVE RACKING, to say the least, no video or instructions. NOTHING like taking a (then) $650.00 gun and cutting it into 3 pieces Quote Link to post Share on other sites
KIRCH76 12 Posted February 1, 2013 Report Share Posted February 1, 2013 I freaked out when I cut the stock off mine but I used a hacksaw. I have not cut the grip off yet but I'm sure it will be just as nerve racking cutting the grip. Quote Link to post Share on other sites
timmmyy 9 Posted February 1, 2013 Report Share Posted February 1, 2013 nice video , Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.