A little help here

[U.S. Pratorean 1,234]

I have a Vepr x54 slant back that I would like to put a folder on. Ideally I would like the ACE stock block and the M4 AR15 folding mechanism so I can use the stock and buffer tube of my choice but it seems that only folds to the left and I think that would not completely fold closed with a side mounted optic in place. So I would like it to fold to the right but only left folding adapters are available or have I missed something?

I know ACE has a pig nose M4 stock accessory that bolts on to a folding mech. which will work but I am not sure if that mech. only folds left as well like the one CSS has.

Ideas, examples advice would be greatly appreciated. Bonesteel has a perfect setup but it is for a square back receiver.

Thank you.

[thebuns1 4,323]

This is the only one I know of that requires no mods, but its a Galil style, but it can be ordered to fold left or right side.

 

http://bonesteelarms.com/Vepr-rifle-Galil-style-stock-VPRFSGL.htm

[Long Shot 1,287]

I'm looking at this one for a different application but it sounds like what you need, with a pig nose of course.

 

(FSM) ACE Folding Stock Mechanism

Fits between the front of fixed stock and the receiver block .By inverting the FSM the stock can be made to fold left or right. Vertical adjustment .500” . Precision machined from 6061 Billet. Heat treated and hard anodized for maximum wear resistance and strength. Locks tight. Can be “pulled open” for rapid deployment of stock. Length .700” . Weight 74g ( 2.7 oz. ). Check Local, State & Federal Laws before installing a folding stock on your weapon.

 

SKU: A500

$59.99

 

Quantity:

[U.S. Pratorean 1,234]

I'm looking at this one for a different application but it sounds like what you need, with a pig nose of course.

 

(FSM) ACE Folding Stock Mechanism

Fits between the front of fixed stock and the receiver block .By inverting the FSM the stock can be made to fold left or right. Vertical adjustment .500” . Precision machined from 6061 Billet. Heat treated and hard anodized for maximum wear resistance and strength. Locks tight. Can be “pulled open” for rapid deployment of stock. Length .700” . Weight 74g ( 2.7 oz. ). Check Local, State & Federal Laws before installing a folding stock on your weapon.

 

SKU: A500

$59.99

 

Quantity:

Looks like this is the ticket. Thanks for any input.

[Long Shot 1,287]

Or this?

Left or right option.

 

http://bonesteelarms.com/Vepr-Rifle-Folding-stock-with-integral-mil-spec-extension-tube-vprfs-tb.htm

[SouthernOne 203]

This may be the same as above:

 

http://www.carolinashooterssupply.com/product_p/cncw-vepr-tube-25371.htm

[breid1970 327]

If i had known about Veprs before I bought my saiga, I would have gotten one hands down. They just look damn solid.

[U.S. Pratorean 1,234]

I finally just went with a folder so it would match my Robinson Arms Vepr's. Folded to right to clear the optics rails. Top to bottom, 5.45x39, 7.62x39 and 7.62x54R.

These are monster heavy AK's compared to my Arsenal AK74 but the accuracy is superb, the recoil really light and you could drive a tank over them and they'd probably be GTG.

Edited September 3, 2013 by U.S Praetorian

[Dad2142Dad 6,559]

/\ /\ NICE