EthanM 514 Posted February 11, 2014 Report Share Posted February 11, 2014 (edited) So everyone probably already knows that Magpul is coming out with a metal reinforced mag and that this mag is basically for testing. But here a few pictures and a comparison to a couple other US made mags. I love the design of this mag (except for the no metal part) and I believe once magpul does come out with a metal reinforce version It will be good to go. The only issue I have found when using the magazine is with a VFG attached to the forend. I usually have no issue with mag changes but this mag is a pain in the butt to remove with a VFG. Every other mag I have doesnt have an issue with this (tapco, USPalm, and a buttload of steel mags). I haven't gotten to go shoot it yet, so I need to do that and see how tough it really is. I'll post some more pics later. If there's a pic of something in particular you want, just tell me and I'll see what I can do. Edited February 11, 2014 by Ethan M Quote Link to post Share on other sites
Zombiehunter762 376 Posted February 11, 2014 Report Share Posted February 11, 2014 Thanks for the post. I have all steel mags except for 2 US Palm mags. 1 Quote Link to post Share on other sites
thebuns1 4,323 Posted February 11, 2014 Report Share Posted February 11, 2014 Heres a good one where the lug sheared off. 1 Quote Link to post Share on other sites
ChileRelleno 7,071 Posted February 11, 2014 Report Share Posted February 11, 2014 (edited) I hope they make both the front/back with steel inserts. Make that sucker as bullet proof as possible. ETA: Made just like a Bulgy Circle 10, three steel inserts, front/back and feed lips. http://www.k-var.com/shop/downloads/mag_flyer.pdf Edited February 11, 2014 by ChileRelleno 2 Quote Link to post Share on other sites
EthanM 514 Posted February 11, 2014 Author Report Share Posted February 11, 2014 More pics Thanks for the post. I have all steel mags except for 2 US Palm mags.I really like the US palm. I have a several and have never had any trouble. They are very durable mags in my use with them. Here's one in my Chinese ak 2 Quote Link to post Share on other sites
thebuns1 4,323 Posted February 11, 2014 Report Share Posted February 11, 2014 I hope they make both the front/back with steel inserts. Make that sucker as bullet proof as possible. ETA: Made just like a Bulgy Circle 10, three steel inserts, front/back and feed lips. http://www.k-var.com/shop/downloads/mag_flyer.pdf I hope they do too. Id really love to see a US mag on par with a Circle 10. Quote Link to post Share on other sites
DLT 1,646 Posted February 11, 2014 Report Share Posted February 11, 2014 As blasphemous as this may sound, I think the Tapco mags may be better than the current all polymer magpuls. Quote Link to post Share on other sites
EthanM 514 Posted February 11, 2014 Author Report Share Posted February 11, 2014 (edited) As blasphemous as this may sound, I think the Tapco mags may be better than the current all polymer magpuls.The tapco seems to be thicker at the back tab than the magpul. Magpul Tapco Edited February 11, 2014 by Ethan M Quote Link to post Share on other sites
dashowdy 141 Posted February 11, 2014 Report Share Posted February 11, 2014 the newer tapco polymer is much more rigid than the earlier runs, I have some that I can bend the feed tower, The newer ones are solid as a rock no flex, just wish they had a stouter spring, going to buy some of there slab sides and try them out. Quote Link to post Share on other sites
DLT 1,646 Posted February 12, 2014 Report Share Posted February 12, 2014 Another positive about the Tapco's is that you can exchange springs and followers with surplus mags and they fit! I don't know if the magpul guide rails allow for that. Someone please check that if you got the mags. The other thing is the slabside just looks perfect in an AK. I don't care for the waffle patterns in any of the three mags above. Now the circle 10 waffle pattern is another story. That looks great. Quote Link to post Share on other sites
XD45 7,124 Posted February 2, 2015 Report Share Posted February 2, 2015 The M3 pmag with steel reinforcements will be available soon. http://www.magpul.com/products/pmag%c2%ae-30-ak-akm-gen-m3?VariantID= Quote Link to post Share on other sites
DLT 1,646 Posted February 2, 2015 Report Share Posted February 2, 2015 The Toth Tool mag is available now. Anyone tried one? Quote Link to post Share on other sites
XD45 7,124 Posted March 10, 2016 Report Share Posted March 10, 2016 FYI, the AK PMAGs are prone to cracking at the feed lips. Magpul has acknowledged the problem and is working on it. Meantime, don't buy PMAGs. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.