KIRCH76

you will have to wait for matt on the official word but im sure its a complete replacement.

the feed lips are different lengths

that is not an mka schematic thats why...go to gunsumerreports there is one on there

just cut the lower receiver at an angle

gotta have it!! how much??

good luck find the trigger and hammer in stock anywhere

If you want a collapsable stock or high cap mags you must be 922r compliant. Which is replacing 4 parts on the list from the batf. You can go to gunsummer reports scroll to the mka and he has a lot of detail about the gun and the list of 922 countable parts

looks good but it does not sound like you are 922r compliant. According to the batf there is 14 replaceable foreign parts assuming when you cut the buttstock off you used US made parts. Right now there is a few in production yoi could replace gas piston, handguards, trigger/dissconector set (2 parts), hammer, mag floor plate. If my memory serves me correct thats it. So as long as your buffer tube jam nut and stock are US made you need to repace 4 of those parts to have a colllapsable buttstock or high cap mags

well now that CSS is back open i see they dont have the adapter for the mka to install saiga brakes anymore...does anyone know where i can get one of these ??? or who made them

has anyone bought the adapter for saiga 12 muzzle brakes and used a saiga barrel shroud? does anyone know if it will fit diameter of the barrel? standard length is 9 inches which might be to long but should be able to cut it down or i hive seen one short 6 inch version.. What do yall think?

I finally chopped the buttstock off.

took a peice of wood and put it on the flat part of the receiver and tapped it on the table few times while rotating the saftey and it fell right out

nevermind got it out

im replacing the trigger but i cant get the plunger out for the saftey. the screw and spring came right out but the plunger seems to be stuck is it supposed to fall right out?? is there a trick to get it out??

i think you are correct mullet. Because on standard tube fed shotguns its 1 in the pipe 2 in the tube for a total of 3

I agree with you Tony but with CSS closing every couple days it might make it hard to buy

you could always cut a 2x4 to the size and put it in there

carolina shooter supply .com sells the block for the 5 round mag to restrict it tl 2 shells and one in the pipe. centerfiresystems did sell2 round mags but they are not on there anymore

what hanguard did you get?? did you try putting the factory on to see if maybe that was the problem??

Great news Matt! What kind of price could be expect?? Any pics yet??

tooth and nail and firebird offer handguards with foward charging handles

only a few companies are making them but as far as I know there is nothing available right now. Hopfully tooth and nail comes out with one or firebirds redesign with be out soon

jim are you going to anounce a price point on this?? or can you pm me the price... also is it going to be a striped or loaded lower ??

bad ass! I love the little holes drilled on the side.

no pics yet??