Jump to content

Angle King

Banned
 View Profile  See their activity

  • Content Count

    31

  • Joined

  • Last visited

 Content Type 

Everything posted by Angle King

  1. Angle King
    well just to report in on this..i shot 200 more rounds today..still no problems or differences in accuracy..
  2. Angle King
    its cool syn..n e ways shot 100 more rounds today without n e notice in accuracy or n e difference in the mark..will keep u posted though but i think im ok.
  3. Angle King
    ya i inspect it everytime i shoot and after when i clean..i wish i could understand what the metal is doing between the cut and the ring on the inside of the barrel..you know wut i mean? like if it is even possible for it to get worse...also if i shot 500 rounds through it with no notices in accuracy change its probobly gonna be ok..and if it was like 1/1000 of an inch difrence in hieghth (cant feel any difference with a toothpick) would shooting it wear that spot back down to normal? i wonder if i shortened the life span of the barrel.. i already have about 5000 rounds through it.
  4. Angle King
    wow right on lemmon thanks for sacrificing ur spare barrel for me..so now that u see wut i am talking about do u think later on down the road the barrel will be affected in any dangerous way..if alls i did was fuck up the accuracy a bit i can live with that it seems to shoot strait even after the dumb ass pipe cutter move..like i said, the other day when i went out shooting the accuracy seemed the same i just dont know wuts gonna happen 5000 rounds from now if anything at all...??i am wondering if the faint line will turn into a crack or if it will just polish away from bullets passing over it
  5. Angle King
    ya at 50 yrds...same groups as before...
  6. Angle King
    im pretty sure i lucked out and stopped just in time..its the only thing that i think could of caused the wierd mark..the pipe cutter i think..i think if i would have went n e further there woulda been a slight bulge and wouldnt shoot properly (accuracy would be affected i think)..500 rounds and no issues and many of those rounds were pretty close to automatic fire so i should be good..
  7. Angle King
    so i did some research and it sounds like i did cromip the inside of the barrel a little bit..or thats what coulda happened if i woulda kept going..i was using a pipe cutter with a dull wheel and i was also probobly going to fast and tight the device too much at once..therfore it left a perfect ring like mark all the way around the interior of the barrel at the cut point..even on the riflings which boggles my mind but it is what it is...i think in my case its more of a pressure type mark because i didnt cut deep enough to make it that far..hopfuly it doesnt cause future problems
  8. Angle King
    first of all wuts a ringed barrel..and if squibs are problems i have never had n e problems at all..i have about 5500 rounds through it with out any issues..every bullet put down the barrel has been tulammo and it has worked great..
  9. Angle King
    went shooting again today lemon...200 more rounds and no problems..some how i think the line on the inside of the barrel is some sort if pressure mark or somethin but it has not affected the accuracy or anything..i wonder if it will become a problem eventually..looked at my buddies saiga and he does not have the same mark on the inside of the barrel so its probobly not from the factory...im still kinda boggled by this..
  10. Angle King
    I never had to. Try to screw on your attachment after the first pass, and then tighten it some if need be. Are you going to thread it for the 14x1L and then use some kind of adapter to install the 74 style? Theres plenty of threads about threading if you search for them. I suggest using the Google to search this forum, as the search feature here is not that great. yes to 14x1 left hand thread and no to the adapter..i ordered i think the tapco ak 74 style break. the one for 21.95 at carolionashootersupply
  11. Angle King
    thanks man..i did some heavy rapid fire today without issues..i think ill lay this issue to rest..thanks for the input..so back to threadin the barrel..my tools and ak74 break will be here monday and im wonderin if theres n e thing i shouldknow before threadin it..i know to loosin the dye all the way for the first pass..will i need tightin the dye and make a second pass?
  12. Angle King
    i have not threaded it yet..and yes its all the way around on the riflings and the smooth areas of the interior of the barrel..so ya i dont know but i dont think it will be an issue..
  13. Angle King
    same thing happened to me with the pipe cutter cuttin into the barrle..i cut about 1/32 of an inch into it..also noticed a ring like line on the inside of the barrel and dont know if it has been like that from the factory or some result from the pipe cutter..ran a tooth pick over it and cant feel n e burs or anything...shot today and had no problems..just hope it doesnt turn into one over time.
  14. Angle King
    thanks a lot lemmon..good piece of mind i appriciate it..theres no way in hell theres light comin out i looked..the cut is like 1/32 deep around the outside of the barrel i used a micrometer to measure..and when i feel inside the barrel with like a tooth pick i can feel any burs or any roughness at all when passing over the line..maybe something from the factory..not sure never noticed it before..it was a pipe cutter with a round cuttin "wheel" type thing..could it be possible that the pressure caused the mark on the inside of the barrel..i dont see how cause i only cut 1/32 deep so i dont kno
  15. Angle King
    whoa...i was just lookin inside my barrel and noticed that theres a line on the inside of the barrel about the same spot i accidently cut my barrel while cuttin off the shroud..i dont see how there would be a line from cuttin barly 1/16th of an inch with a pipe cutter..does n e one else have this??????????? PLEASE HELP???
  16. Angle King
    thanks
  17. Angle King
    get it while the gettin is able to be got..if u know wut i mean..18 bucks aint too bad.. i have 20 pre-ban steel ak mags..no bullet guide either..i modded about half of em to fit in my saiga without doin the bullet guide conversion..
  18. Angle King
    hey guys..so i was cuttin my barrel shroud off to thread it..i cut a little bit too deep ( about 1/16th) into the barrel itself..i dont think it will be a problem but i just wanted some input from you guys since you know what you are talking about..wondering if accuracy will be affect, if it will weaken the barrel...? Thanks...
  19. Angle King
    I just popped off the "heatshield" thats spot welded to the gas tube...no fitting issues at all ya i had to do the same thing..in order to get the upper and lower handgaurd to bolt all the way down tight to each other, theres gotta be some kind of grinding and fitting done in order to get a good fit without the gas tube being binded up..
  20. Angle King
    hello guys just wanted to let u know i use to own one of these..carolionashootersupply sells em as fits "draco" and ak-47 varients..it does not fit right outa the box though..i spent a lot of time grindin down the contact points where the upper hand gaurd touches the gas tube when bolted down..i had to grind so much that the recoil of my ak cracked it..so i bought a real usa made quad rail from chaos usa..awsome hand gaurd...
  21. Angle King
    oh come on...rapid fire my ass..those groups are a little close to be rapid fire..even full auto u cant get that kinda group
  22. Angle King
    it works great, 450 rounds through 1 mag just to test the durability and theres no wear no chips no nothin.. very tough.. and the riser optic...not really my favorite but its not bad..sits a little high but works very well..
  23. Angle King
    like how many rounds i have through my moded mags?? i put 450 through em today..
  24. Angle King
    people laugh but i actually have the [re an ak mags and i just closed up the space at the top of the mag with some jb weld...worked great..sanded it and threw a paint job on it and now it looks like it came like that..cycles wonderfuly.
  25. Angle King
    Here's my Saiga... tapco G2 fire control group mako shock resistent stock surfire magazine chaos quad rail magpull sling magpull forward grip s.a.w. pistol grip wolff extra power recoil spring black jack recoil buffer
×
×
  • Create New...