Jump to content

jack mace

Member
  • Content Count

    24
  • Joined

  • Last visited

Everything posted by jack mace

  1. i have a contribution for your girl.
  2. sorry guy i didnt know, i dont follow rules.
  3. Please read the WTS/WTT posting rules. Thanks, MCASSgt New River
  4. fuck!... anyone want a set of krebs sights and a black tapco intrafuse handguard for a good price?
  5. You just need to remove the rear sight which may require a hacksaw, a big ass hammer, and a punch. Or you might get lucky and be able to tap it out easily. But that's all. I saw a thread somewhere talking about how to fit the rail with a file if it ends up crooked thanks to the russian QC... yeah, ive been through that. i took off the stock rear sight, ive got krebs on it now and i know that aint workin with that quad rail.
  6. nice work, im runnin with the tapco intrafuse right now. how easy is it to switch over to the chaos quad rail? meaning is there drilling and shit involved|? i want that setup bad.
  7. i used a dremel and cut mine out. then used a hammer and flat head screwdriver to finish it off.
  8. not to bag on the twister puck, it does what it supposed to. but it might be undersized by a cunt hair allowing gas to escape hense not enough pressure to throw the weak loads. since u bought it anyway use it on the larger loads. but use the factory puck on the weak walmart shit dont go smaller than 2 3/4 1 1/8oz 7,8 shot but thats just me. good luck
  9. i had the same problem. i have a 3 port gun i didnt drill the ports though, bought the gunfixrs plug and broke the gun in right using many rounds of buck,slug,hi brass. then i got the twister puck. i tryed shooting the cheap shit walmart 100rnd boxes of federal winchester remington. FTE...FTE...FTE even on setting 3. so i took out the twister puck and put the factory puck back in now its throwin that cheap shit like a mother fucker bam no more FTEs. try that bro it might help.
  10. buy it.break it in.mod it. let the destruction begin. game,girls and bad guys will bow 2 to it.
  11. i love my krebs sights, it hks are nice too though. i weld at work and was considering doin the hks but i didnt want to weld,grind,f up my finish on my gun so i went with the bolt on route. u can line up the sights using the factory bead or a laser bore sighter. as far as the welding screwin up the chrome lining i have no clue.
  12. First, whats with the smartass remark. You should really try to handle things civilly and tone down your posts. Second, what Boatbod is implying is that no two guns are the same from the factory. I have two S12's that each have 3 gas ports. One will eat Federal LE slugs on setting +1 whereas the other will not. Different tolerances require me to run that particular gun with that particular ammo on gas setting two. So before you begin giving advice, maybe you should spend more time learning the platform. hey little girl i dont care how many s12s u got, starpd is talking about a fact
  13. hey boatbod where in his post does it say he got out a fuckin mic and a dremel and drilled his ports?
  14. slugs,buckshot,hi brass pheasant in 2 3/4 and 3" never fail, but walmart winchester turns my s12 into a single shot. It has a gunfixers plug and an etac twister puck equipped, im gonna try 100 rounds of federal bulk this weekend. (1 1/8 oz 8 shot)
  15. +1 ON KEEPING THE PLUG CLEAN, I USE GUN OIL FOR THE THREADS (1 DROP THEN SPIN). DO NOT FIRE SLUGS OR BUCK ON SETTING 2 EVEN 2 3/4.
  16. In the butt no babies!

  17. You can buy the tapco t-6 stock with a pistol grip it comes in a set. found at carolina shooters supply or cheaper than dirt. I put one on my s12 and saiga 7.62, they work really well. they also have the matching forearm. snatch up a tapco vertical grip to go with it, also a nice piece. as far as the other mods the skys the limit. gas pucks, gunfixers gas plug, krebs sights etc...
  18. I screwed my gunfixers plug in to where it "bottoms out" or in all the way in, the first setting it stops at is 2 when i start to turn it out. Does this mean that 2 now becomes 1 since the plug is now letting the least amount of gas in? or do i unscrew it till i get to the +1- setting and then proceed to back it out for the lighter load settings? i read the instructions and didn't get it. any help would be appreciated. thanx p.s. just got my s12 and it has 3 gas ports.
  19. jack mace

    922R

    I know this topic is exhausted, and im sorry to ask but my new s-12 will have a tapco T-6 stock w/pistol grip, tapco intrafuse hand guard and md arms drum and a tapco vertical grip. am i 922 compliant?
  20. how do you guys like the krebs ak sights on your s-12? Are they a bitch to line up? What tools do you recommend to remove the rear factory sight, so i dont damage or scratch the finish? Or is there a better sight platform to use (no welded on) maybe a fiber optic tube thats compatible with the s-12? p.s. thanks for the help you guys are awesome.
  21. im new here,and my saiga 12 is coming soon. I've seen a few of you have trouble with the gas ports. where are they located? Also do you clean them or open them up when when they come from the factory? Lastly if my saiga 12 has 2 ports, should i send it out right away to get the third one put in it? This gun will be skeet,bird,slug in 2 3/4 mostly. thanx
×
×
  • Create New...