chibajoe 0 Posted September 25, 2008 Report Share Posted September 25, 2008 So, is there any chance that MD Arms will make a drum for the Saiga-20? Considering the smaller size of the 20 gauge shell, would this mean that we can get a 25 round drum? Quote Link to post Share on other sites
Garys4598 1,065 Posted September 25, 2008 Report Share Posted September 25, 2008 So, is there any chance that MD Arms will make a drum for the Saiga-20? Considering the smaller size of the 20 gauge shell, would this mean that we can get a 25 round drum? As they say... "a slim chance is better than no chance...." But if I were a bet'n man, I'd wager all my money on NO chance. Mike's life if simply too short.... and he has other hoppers in the fire anyway. Quote Link to post Share on other sites
James92TSi 0 Posted September 25, 2008 Report Share Posted September 25, 2008 (edited) Given that we don't even have >5rd domestically-grown stick mags available for S-20 yet, I doubt anyone is seriously considering building a drum. I'd love for S-20 drums to happen, but as the saying goes, I wouldn't hold my breath waiting to count them before they hatch in the bush, or whatever. Edited September 25, 2008 by James92TSi Quote Link to post Share on other sites
chibajoe 0 Posted October 1, 2008 Author Report Share Posted October 1, 2008 (edited) Perhaps not as unlikely as y'all might think; here's the response I got: It would be fairly easy to make one using my existing molds. Same with the .410. But to do it the easy was (not making a complete set of new molds) they would have to be 2 3/4 only. I am pretty sure that the most commonly fired .410 rd is a 3 inch so I think it might be out of the qestion. What do you mostly fire out of your 20ga? Thanks, Perhaps if more people requested a Saiga-20 drum, MD Arms might be willing to run off a few of them... Edited October 1, 2008 by chibajoe Quote Link to post Share on other sites
Garys4598 1,065 Posted October 1, 2008 Report Share Posted October 1, 2008 Perhaps not as unlikely as y'all might think; here's the response I got: It would be fairly easy to make one using my existing molds. Same with the .410. But to do it the easy was (not making a complete set of new molds) they would have to be 2 3/4 only. I am pretty sure that the most commonly fired .410 rd is a 3 inch so I think it might be out of the qestion. What do you mostly fire out of your 20ga? Thanks, Perhaps if more people requested a Saiga-20 drum, MD Arms might be willing to run off a few of them... Well "holy cow"......... I gotta admit I am a bit surprised by Mike's PM reply to you. Terrific news though! And, clearly you are absolutely correct: "Perhaps if more people requested a Saiga-20 drum, MD Arms might be willing to run off a few of them..." Quote Link to post Share on other sites
tmack 0 Posted October 2, 2008 Report Share Posted October 2, 2008 I would buy one,and 23/4 is perfect.Hopefully more people will respond to this!!!! Quote Link to post Share on other sites
fobmagi 0 Posted October 2, 2008 Report Share Posted October 2, 2008 Depending on the price I'd be down for 2-3 of them. 2-3/4" would be the best, I can't afford to blast 3's out of a 20 round drum anyways. 20-rd is fine also... more than 5 rounds and feeds reliably is ALL that matters to me. Quote Link to post Share on other sites
James92TSi 0 Posted October 2, 2008 Report Share Posted October 2, 2008 That's awesome and completely not what I expected to hear! 2-3/4" would be great. All the loads I use in my S-20 are 2-3/4" anyway. (I'm vaguely aware that I have a 3" magazine for the thing in a drawer somewhere...) I don't have as much play money in my gun fund as some, but I'd at least scoop up one drum & possibly a second later on if available. Hope Mike picks up the ball from here and gives us some good news Quote Link to post Share on other sites
rag 0 Posted October 2, 2008 Report Share Posted October 2, 2008 I'd take at least one! Quote Link to post Share on other sites
TTR 1 Posted October 2, 2008 Report Share Posted October 2, 2008 I would buy at least 2. Quote Link to post Share on other sites
chibajoe 0 Posted October 2, 2008 Author Report Share Posted October 2, 2008 Yeah, I was totally floored by his response as well. He's actually indicated that they might start looking into this within the next few weeks, as soon as they catch up on the saiga-12 drum orders. I guess that old saying that you can't get fed with your mouth closed is true. Quote Link to post Share on other sites
yellowcarbon 4 Posted October 2, 2008 Report Share Posted October 2, 2008 If they are priced close to the 12ga drums, I would take 2 right away. I would than take 2 or 3 as I get more play money. The mags make the gun. I already have some factory 10rd mags, some fraken 10rd mags and a bunch of 5rd mags. So the drums are definitely a welcomed posibility. Quote Link to post Share on other sites
coondog1 0 Posted October 21, 2008 Report Share Posted October 21, 2008 If Mike would make them I would buy a couple and I would still have to buy a saiga 20. Now I only own a 12. Quote Link to post Share on other sites
cscharlie 107 Posted October 21, 2008 Report Share Posted October 21, 2008 With higher cap mags available, I believe a lot of people would find love for the S-20. Quote Link to post Share on other sites
tmack 0 Posted October 22, 2008 Report Share Posted October 22, 2008 well this don't look like it is gonna happen.Can anyone help me get info to make a fraken mag?thanks Quote Link to post Share on other sites
IndyArms 10,186 Posted October 22, 2008 Report Share Posted October 22, 2008 I will buy 10000... THERE!!! NOW... NO ONE NEEDS TO RESPOND TO THIS THREAD WITH " I will buy X amount of them!" and we can let it fade away until Mike announces they are ready to SHIP... Fair enough? Quote Link to post Share on other sites
SavageEagle 0 Posted January 17, 2009 Report Share Posted January 17, 2009 Not fair. I want 2. I only have one 5rnd mag and never shot the thing as I just got it. It's dismal to know that I can only get 5rnds outta this thing as it's a damn AK style shotgun!! AK style means HI-CAP! Not 5 friggin rounds! WE WANT DRUMS WE WANT DRUMS WE WANT DRUMS MADE IN USA MADE IN USA Quote Link to post Share on other sites
kmoore 3 Posted January 20, 2009 Report Share Posted January 20, 2009 you do realize that much to the surprise of many, Mike is working on a drum for the S12, right? He is thumbing his nose at all of the chicken-littles who are crying about a ban that hasn't materialized ... I don't know how long it'll take to get this out (he has all of the learnings from his S12 already in pocket ... but I don't know what needs to be done to get the rest of it figured out). My HOPE is that the DOPE will leave us folks who cling to our guns and religion ALONE. If so, be patient. Also, I'm a wraithmaker fan. I got one of the earliest drums and like it (or not around here) the thing has run like a scalded cat from day one (for me). They have a 23 round 20ga drum in the works. Lastly, Factory full cap mags are out there. You just have to wait ... and pay thru the nose when you find one Quote Link to post Share on other sites
18jms 0 Posted March 19, 2009 Report Share Posted March 19, 2009 you do realize that much to the surprise of many, Mike is working on a drum for the S12, right? He is thumbing his nose at all of the chicken-littles who are crying about a ban that hasn't materialized ... I don't know how long it'll take to get this out (he has all of the learnings from his S12 already in pocket ... but I don't know what needs to be done to get the rest of it figured out). My HOPE is that the DOPE will leave us folks who cling to our guns and religion ALONE. If so, be patient. Also, I'm a wraithmaker fan. I got one of the earliest drums and like it (or not around here) the thing has run like a scalded cat from day one (for me). They have a 23 round 20ga drum in the works. Lastly, Factory full cap mags are out there. You just have to wait ... and pay thru the nose when you find one Id be interested in one of these also Quote Link to post Share on other sites
paychex 0 Posted March 23, 2009 Report Share Posted March 23, 2009 why does the chick with the fat legs always gets her panties in a bunch when we respond "we would buy these mags if mike made them". I thought a positive response would help. Just my way of thinking. I guess the fat chick will throw me off the sight now. Quote Link to post Share on other sites
kmoore 3 Posted March 27, 2009 Report Share Posted March 27, 2009 you do realize that much to the surprise of many, Mike is working on a drum for the S12, right? oops, I meant to say "working on a drum for the s20" and post is too old to edit. paychex, care to clue us in on what you are talking about? I don't get it, did you have a post deleted or something? Quote Link to post Share on other sites
paychex 0 Posted March 27, 2009 Report Share Posted March 27, 2009 (edited) you do realize that much to the surprise of many, Mike is working on a drum for the S12, right? oops, I meant to say "working on a drum for the s20" and post is too old to edit. paychex, care to clue us in on what you are talking about? I don't get it, did you have a post deleted or something? there was the same type of thread started about a month back. i think mike started it on making a drum for the s20. anyway we all said we would buy one. i would buy 3 or 4 if i could. well this guy got upset and did his thing with the giant letters. i just thought if mike was testing the water about making the mag we should cheer him on and say make them and we will buy them. i just can't understand why this guy gets so upset on the topic. this is the s20 forum. thanks and as i said before make them and we will place our orders. thanks for the great web site. LAST POST ON THIS TOPIC WAS NOV. 25 2008 Edited March 27, 2009 by paychex Quote Link to post Share on other sites
TTR 1 Posted March 27, 2009 Report Share Posted March 27, 2009 As I stated in a previous post. I will buy at least 2 drums... Quote Link to post Share on other sites
paychex 0 Posted March 27, 2009 Report Share Posted March 27, 2009 As I stated in a previous post. I will buy at least 2 drums... That's a bold statement Quote Link to post Share on other sites
TTR 1 Posted March 28, 2009 Report Share Posted March 28, 2009 As I stated in a previous post. I will buy at least 2 drums... That's a bold statement LOL Quote Link to post Share on other sites
gunman1 1,753 Posted March 28, 2009 Report Share Posted March 28, 2009 I will buy 10000... THERE!!! NOW... NO ONE NEEDS TO RESPOND TO THIS THREAD WITH " I will buy X amount of them!" and we can let it fade away until Mike announces they are ready to SHIP... Fair enough? FUCKEM, letem eat cake!!!!!!!!!!!!!!!!!!!!!! Sounds like some pricks in congress! Quote Link to post Share on other sites
IndyArms 10,186 Posted April 4, 2009 Report Share Posted April 4, 2009 The whole point is... why inundate the poor man with a hundred people telling him how many they will buy... Dont you think he KNOWS they will sell?!?!? Not to mention the thread just goes on and on and on with endless blah blah blah... I presume I am the one mentioned by paychex as the chick with the fat legs... Although I cant imagine why ANYONE would complain about the chick in my avatar... personally, I think shes pretty smokin hot! ( hence shes my avatar! ) And to be honest, I get about a pm a week from someone asking me who she is cause they too think shes smokin hot! Maybe Paychex likes bony, scrawny women?!? Well, Paychex... I am NOT a chick... I am a dude... and I am also a MODERATOR of the forum... As my job title might suggest... I need to MODERATE once in a while... my thought on this is to try to keep mindless banter to a minimum to conserve forum bandwidth. That translates to keep the useless crap to a minimum so the forum loads faster for everyone. I am sorry that you dont agree with me, and you feel the need for every person in the world to chime in saying they want "X" amount of them... That gives us a thread with 35 pages of 600 people each saying " I want x amount "... What purpose does that REALLY serve?!?!? as I said... Mike D. KNOWS these will sell just as fast as the S12 drums did! Let the man work... when he offers them for sale... THEN go to his website and state " I will take X amount" by clicking that many into your "shopping cart" before you "check out" Then everyone is happy!!! Paychex... you must not be from 'round here... Cause on THIS forum you dont get banned or posts deleted by voicing your opinion. You might get your dick stepped on... but we try to value the 1st amendment just as much as the 2nd!!! Quote Link to post Share on other sites
sunnybean 939 Posted April 4, 2009 Report Share Posted April 4, 2009 Indy, Here's a few more of your girl....top of page 7 post #121... More "fat legged girl" photos. Quote Link to post Share on other sites
IndyArms 10,186 Posted April 5, 2009 Report Share Posted April 5, 2009 Sunny.... YOU DA MAN!!!!! Thanks a bunch!! And I gotta tell ya... there aint NO FAT LEGS or FAT CHICK in any of THEM pics!!!! :wub: Quote Link to post Share on other sites
gunman1 1,753 Posted April 5, 2009 Report Share Posted April 5, 2009 (edited) Deleted by AA-re-cvrd Edited April 8, 2009 by AA re-cvrd Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.