csspecs 1,987 Posted January 11, 2012 Report Share Posted January 11, 2012 Just want to start by saying. This is a rough prototype stamping and has only a basic cold blue finish. Production floor plates will be laser cut, square hole will also be cleaner cut. I have the plates on order, should be done in about a month or so depending on schedule conflicts. Pricing will be reasonable just not yet determined. There are slight dimensional differences with the stampings. Ours is closest to a Chinese.... I kinda look at it that its easier to prove its domestically made, since its a few thousandths different... These are made to work on both the spline and spineless yugo imports. May have slight fitting issues with the more exotic AK mags, but then again who is going to change the floorplate on a collectible magazine? 4 Quote Link to post Share on other sites
Gh()st 3 Posted January 11, 2012 Report Share Posted January 11, 2012 Nice, been looking/hoping for US made for a while now. Tagged for follow-up, and further status. Quote Link to post Share on other sites
csspecs 1,987 Posted January 11, 2012 Author Report Share Posted January 11, 2012 Thanks, I figure they will allow for more interesting configurations of rifles while still getting to use nice beefy combloc mags.. Quote Link to post Share on other sites
draftpick 5 Posted January 11, 2012 Report Share Posted January 11, 2012 keep us posted!! Quote Link to post Share on other sites
imarangemaster 315 Posted January 11, 2012 Report Share Posted January 11, 2012 PLEASE! I will need some for mine, too. Quote Link to post Share on other sites
ChileRelleno 7,071 Posted January 12, 2012 Report Share Posted January 12, 2012 I'll take ten (10)... Now hows'bout followers Quote Link to post Share on other sites
thebobrusso 27 Posted January 12, 2012 Report Share Posted January 12, 2012 nobody makes these yet? Quote Link to post Share on other sites
csspecs 1,987 Posted January 12, 2012 Author Report Share Posted January 12, 2012 As far as I know no one makes them... But there are like 400 million people in the US so odds are someone else could be making them, and I've never heard of it. Also did some checking, I've tried Korean (current sporting versions, the gray phosphate finished 30s, and the 'Teflon' coated ones) Chinese (Norinco 30, 5 round and 'chogos') Yugo (both current and surplus) Hungarian Bulgarian Russian (I think molot) Romanian And what looks to be a Bosnian, it has two ribs and looks like it crawled through hell in a chest rig. All fit to satisfaction. Followers are another trick, working on a cost effective way to make the curved front and back. Quote Link to post Share on other sites
pjj342 632 Posted January 12, 2012 Report Share Posted January 12, 2012 Anything that keeps the average shooter legal is a huge thing. This is the first Ive heard of us made floorplates, not for polymer mags. Awesome. Quote Link to post Share on other sites
imarangemaster 315 Posted January 12, 2012 Report Share Posted January 12, 2012 Seriously, if the price is reasonable, I need about 12! Quote Link to post Share on other sites
draftpick 5 Posted March 5, 2012 Report Share Posted March 5, 2012 Any updates? Quote Link to post Share on other sites
csspecs 1,987 Posted April 6, 2012 Author Report Share Posted April 6, 2012 They are currently available. http://stores.csspecs.com/-strse-25/AK-dsh-M-Steel-floor-plate/Detail.bok 2 Quote Link to post Share on other sites
thehun 20 Posted April 7, 2012 Report Share Posted April 7, 2012 This will be heaven....nice idea Quote Link to post Share on other sites
draftpick 5 Posted April 7, 2012 Report Share Posted April 7, 2012 anyone buy any yet? Do they fit right and function properly? Quote Link to post Share on other sites
csspecs 1,987 Posted April 9, 2012 Author Report Share Posted April 9, 2012 We sent off a lot of orders of them.. They are just a floor plate, not much to them. We've checked them on the samples of magazines we have on hand, they fit the normal cheap surplus mags, and the new Korean magazines fine. Quote Link to post Share on other sites
warthog984 1 Posted September 6, 2014 Report Share Posted September 6, 2014 Csspecs, are you still producing these floor plates? Quote Link to post Share on other sites
HighPlainsDrifter 466 Posted September 6, 2014 Report Share Posted September 6, 2014 Csspecs, are you still producing these floor plates? Hope so cuz I need 20-30. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.