cobravenom39

So, who is buying the retainer clips that cost $60 now? lol

Went to the indoor range today and I was shooting my fully converted Saiga with my Krebbs Custom AK 74 styled brake and noticed something weird. When I was shooting it, sometimes I would see a flame coming out the right side and sometimes out of the left side and sometimes on top. It was an indoor range so I could definitely see it, but I thought it was weird. I was shooting offhand so I didn't notice any weird shots (or fly aways) and I couldn't check the groups. Golden Tiger FMJ My specs: MI FDe handguard, Fully converted with parts from Markw Magpul RVG Magpul CTR (I have a

Thanks for the compliment. I'm thinking of doing a nylon tipped set screw or a set screw with a plunger to keep it snug. It sounds like a great idea, but I can't find the size.

Hey guys, I have been using my Saiga setup with my ace folder for some time now and I noticed that the folder has a tick of wobble in it that probably could be removed. I noticed there's a set screw that can be adjusted, but it could be more effective if it maybe had a soft or a plastic tip on it that could deflect somewhat when put into the shoulderable configuration. Here's some pics for reference: it's the push button folder.....

I cut a little bit into my barrel on mine. Won't hurt nothing.

lol. Just wait. I said the same thing and converted after I got home from the range. I wouldn't waste five minutes doing anything other than "restoring it."

7.62x39 for your first one. End of discussion.

You could go with a $419 "Certified Wasr" from Henderson Defense. Then you don't have to worry about a shoddy finish or canted sights. The nice this about Wasr's is they don't take proprietary bolt action parts.

PM Sent

I can see the quality and design that went into this for sure. There are a few good options for around your price, however.

Why? Yeah, why? The mag dimples don't make that much of a difference. Also, if it doesn't have dimples it might have a pinned FSB and GB, which makes life easier.

Best advice every. I used the Carolina Shooter Supply rear adapter and you put some 10-32 button heads into those holes. Great Idea. To the OP - Do it SLLLLLLLLLLLLOOOOOOOOOOOOOWWWWWWWWWWWWWW and take you time on everything. If something isn't making sense or doesn't look right, pull up the video or another video or post something on here. We love seeing new people like you posting pics of your converted Saiga and we'll answer your ???'s sometimes within minutes. Good luck and get crackin'

Full Conversion

What about the European issued ones from AIM for a dollar more? They seem sturdy and have metal followers. Are they ok for, lets say SHTF use? It looks like they were issued at one time.

What will it cost?

Thanks for the compliment! I haven't posted yet so here goes. Saiga 7.62x39 CSS Ace rear adapter Ace push button folder Ace receiver extension adapter DSA MIL Spec Buffer Tube Magpul FDE CTR ACE AR to AK grip adapter Magpul MIAD Tapco G2 modified trigger group (to retain BHO) MARKW1 ak74 gas tube, lower retainer, gas block and FSB Krebs Custom AK 74 compensator. CSS Bullet Guide Magpul VFG Midwest industries AK variant quad rail Knowledge from Classy Kalasnikov I hope I'm not leaving anything out.

I got more in my FULL conversion. Probably about $1G, but it's exactly how I want it and all kinds a bad ass

It's kinda hard to see from the pics (unless you enlarge them), but it's FULLY converted Saiga not. I did the gasblock, FSB, the gas tube and the handguard retainers. I LOVE the MI handrail.

Hey guys, Yeah, you have to hit the button to pop it away and then press it again to put it back in. It's awesome! I love the color combo. It looks close to the same color in person.

Yeah, they came out good mostly thanks to you! Thank you for replying to my 300 emails why I was doing it!

Wow, Thanks for the compliments, guys. The ACE is super solid. There was a little play with the folder, but there's a set screw that adjusts it so no there's NONE. I'll report back on the groupings.

Hey guys, Just got finished with her. MI FDe handguard, Fully converted with parts from Markw Magpul RVG Magpul CTR (I have a FDE one on the way) Magpul MIAD Ace AK-AR grip converter CSS rear adapter Ace side folder and buffer tube adapter. I was waiting for the Vltor AK tube and I'm GLAD i went with this ACE setup. It's all kinds of bad ass and ROCK SOLID. What do you guys think?

Can you post a link of what you're talking about? I work for a supply company and I wanna get one of these. Thanks! It is simply a "carpenter's square" about $1 at Walmart, Home Depot, Lowes, or any hardware store. It is a plastic triangle, usually yellow or gray,. I has one 90 degree angle and two 45s. One leg of the 90 is a base about 1" wide so it will stand upright. Do you mean a rafter angle square? If so, does the ears of the front sight touch the square or do you have to approximate the distance? http://www.amazon.com/gp/product/B00002255O/ref=pd_lpo_k2_dp_sr_1?pf_rd

Aren't you selling your 7.62x39in the marketplace?

Where are you located?