SGM

The rumors are true in 6-8 weeks we will be releasing a double stack to single feed 20 round magazine for the Vepr 54r. It will be the same length as the 10 but just a little wider to accommodate the double stack. I will post pictures when I get back to the office after shot show. MSRP will be $52.00 but should be able to pick them up for around $50.00

As most of you know we are working on a Vepr 25 round shotgun drum. I have posted a little video on our Facebook page which you can view with out having an account. It is a top loading single round at a time drum that has a single inner spindle which will move faster than the multiple piece wheels/spindles. It will not activate a last round bolt hold open because it uses a couple of dummy rounds as the follower. The only metal pieces will be the spring and screw/bolt holding it together we have no plans of using metal for lugs. Is it large yes, however it is lighter than any 20 round drum on t

This is the first of 3 new products SGM Tactical will be debuting at Shot Show 2014. Introducing the 25 round Vepr .308 Magazine. Based on our Saiga magazine this polymer magazine features a last round bolt hold open and has a 5 year consumer direct warranty. Pricing will be the same as our Saiga 308 magazine. MSRP $46.00 but you should be able to pick them up for around $40.00. Made in the USA.

This is the first of 3 new products SGM Tactical will be debuting at Shot Show 2014. Introducing the 25 round Vepr .308 Magazine. Based on our Saiga magazine this polymer magazine features a last round bolt hold open and has a 5 year consumer direct warranty. Pricing will be the same as our Saiga 308 magazine. MSRP $46.00 but you should be able to pick them up for around $40.00. Made in the USA

around $80.00 but will be online for $75.00

Yes designed for the .308,54R and x39.

SGM Tactical is proud to announce another great accessory for AK rifles. This muzzle brake is a two piece conical design that reduces recoil and fits all AK Rifles that have a 14x1 left hand threaded muzzle. This muzzle brake is Made in the U.S.A.

we do not make a 8 round vepr magazine.

i think the problem is the canuter valve is broke along with it needing brake light fluid. that doomaflitchy can be tricky so i recommend bubble gum, duct tape and chicken wire. now if i could just figure out if my headlights need halogen or fluorescent fluid i would be set. its a ak type thingy, all i really need is a hammer, punch and chisel!!!!

TheGerman. We have not produced a 8 round magazine perhaps you meant 10 rounders. If anyone has issues with our magazines and wants to do the warranty on them just call us, the phone number is on the contact page of our website www.sgmtactical.com

http://www.thefirearmblog.com/blog/2013/08/14/long-izhmash-long-live-kalashnikov/

hmm, the mags looks familiar.

The drums are not designed the same way as a stick mag, it doesn't have a solid follower they are rollers. So we advise not to load on a closed bolt and they will not hold the slide open on the last round or like a normal stick mag.

sorry no updates right now, the only way to do another caliber is to look at what carbines are out there that accept glock mags. so the .40 will probably be next if they do another.

1.These are in production now and should start shipping next week. 2. MSRP $95.00 online at $85.00 give or take a couple bucks 3. They fit both, however the top rail will block the sight picture of the integrated sights V2 ( I believe). There is a groove in the middle of the top rail pic, that works for the long sight radius for the V1 Veprs. You can purchase just the tri-rail (lower) currently for around $75.00 for V 2. 4. They fit all calibers. 5. No these are drop in parts, when you purchase the quad the lower handguard is already drilled and tapped for the upper. that just screws on to

In production now

In production now!!! available in a few weeks. VPS (Variable Position Stock). For the Vepr Rifle with the slant receiver, easy drop in installation. Has 1/4" adjustments with a cross pin locking system.

I have no problem calling this person my Friend, I have known him for 2 years and we discussed some of his service but holy crap he never bragged or told me any of the stuff that was in his book. It wasn't until I used google and typed in his name that I realized all the awards and what he did. I was stunned and just said "Thank You" when I worked with him last weekend. His book drops June 25th and he kicks off the media tour on Fox & Friends!!! Carnivore Buy the book and read about the crazy stuff that he went through. SFC Dillard Johnson, U.S. Army (Ret.), earned a Silver

Costco has some decent camera systems on the cheap.

Shipping out to our dealers and distributors now. They come in modified and full, MSRP of $55.00 but you should be able to get them right at $50.00. Now you can use a choke for shooting steel at a distance and still have a muzzle brake on the shotgun. Fits Saiga or Veprs.

Mach 1 Arsenal has Wolf Ammo in Stock Ammo

that I do not know RGVBadBoy. I do not have a kushnapup to be able to try it on.

www.savvysniper.com best slings on the market for any rifle or shotgun. here is a great video with the slings.

They are not tack welded, at least the one I saw. They can be converted (with the right 922r parts) and do have the folding mech. in them. It would be best if someone used a mill or something like that instead of a dremel, you could use a dremel but it would take much longer. From what I understand the exports from Russia (guns anyway) have many more restrictions than say Romania due to various agreements with the U.S. and their exports of firearms. Molot basically doesn't want any issues with exporting so a simple tack weld is not what they do.

We didn't skip on any manufacturing process or R&D from alpha, beta and final production. We used 5 different shotguns (possibly even more, can't remember) as test guns and tweaked our mags all through the process hence the reason the mags were delayed for over 2 months. We have sold and shipped thousands of these magazines and have less than 1/10th of 1% in actual returned magazines sent in. The lrbho working could be multiple factors but most are due to the shotgun, for instance some people have emailed me and said once they slightly bent the lrbho lever the mags work every time. We foun