paprotective

is illegal, even for you, unless you destroy the receiver prior to "getting the good parts", as only the manufacturer can stamp serial numbers on a receiver. No, I'm no expert, but I know some very misleading (and if used, illegal) information when I see it. Wow. SOmebody did not eat there Wheaties today. Oh crap I forgot to get permission to use a TM name. I'm going to jail. I'm sure EVERYONE here has EVERYTHING they own legal and NEVER did nothing bad/illegal EVER. Next thing he'll be asking you to show the gun prior to assy. showing it CUT in half and then welded.

Yeah. You guys with the LITTLE guns leave us BIGBOYS with 308s alone.. haha I wonder how many rounds of 308 you can get into a drum as big as the 12 guage??

I held off and ordered a 91/30 with the longer barrell. Should be in a few days from now. Next is the ammo, scope, and stock. The down side is the 308 Saiga took a backburner also and will have to wait a few more weeks. I hat bills.

Paladins been watching Tango & Cash and Road Warrior too much again. It needs side holes for the weapons though. The run-flats are nice though.

Or a Drum for the .308 . I'll even let a 50 round slide but would prefer 75-100. Thanking you in advance,

So my 10/22 with clamp on 'muzzle break' would be a No-No in NJ. My Bushy 14.5" AR that I bought when I was in NJ had a 2-3" 'muzzle-break' on it when I bought it?? Now I'm even confused. Jersey did/does suck btw. 1 permit per handgun. Up to 90 days wait for approval for each one. Certain towns hit you every 6 months for the State Police BG check fees. Can't ride around with guns in your trunk either. NJ SP would probably just shoot you for being dumb.

Hes referring to GOVERNMENT interference with NORMAL people. If the military wants me THAT bad they've got issues. Were talking mindless zombies. Maybe thats the 'GOVERNMENT'. haha I can see the confusion.

I agree most 'older-guys' are former military and if pushed just click back into GAME-TIME. I'm in just my mid-30's and I dislike heavily the younger supposed rough-crowd of idiots who 'think' there tough. Ship them overseas throw them a rifle and watch them pee there pants.

Sig 228 normally with 1 extra mag minimum. Keltec P32 as BUG. Was doing a Glock 30 for abit both on/off duty. I do private work so I regulate myself. When I do have others in a group setting working for me I try to make sure they all have the same type of firearm to readily swap mags between them.

Got 10 acres in middle of nowhere TX by the RIO Grande backed up to federal BLM land. 0 Neighbors. Airfield (private and abandoned) is less than 1/2 mile from there also. Going to fence and put up large 'shed' and build a CABIN/3 Room Ranch house at my leisure. TX property laws apply. Shoot now, answer no questions later at all. Just shoot again. Ha. Rifles, shotguns, TONS of ammo in popular sizes. 38 (for 357) 9, 45, 223, 308, 7.62x54. Floors hollowed out, hidden passages to metal rooms, metal and movement detectors in the hidden halls and RADIO equipment and generators. Yes I was

I'm feel a little SHORT here. Could also sharpen one edge and use as Machete for a backup.

Here is a pic of mine with other TOYS. Marlin Papoose, 10/22, Glock 30, SW 40C, and Keltec P32.

NW where did you get the stock and forearm for the 3rd one? I have the ATI Darg stock but the third one you got looks REAL-ER

For shooting the 22 cal nails into walls. Or starting a hole in a concrete wall or floor maybe??!?

Don't remember but supposedly COMPLIANT though not CA DOJ 'approved' yet.

If he's in Cali he needs a 'Key' to remove the mag. There is a new device out for that. Seen here recently.

I agree on the M44 Nagant 7.62x54R (just ordered 1) and Savage 10FP .308 (next buy). No wallet breaking and good results.

Great link. Wow. Thanks ScoutJoe

How would the 7N1 ammo rate in a 20" M44 Nagant? I have 1 of them on the way.

That would bring your stock Saiga to 11 parts. You need 10 or less to be compliant. Add a US made stock, trigger group, or forearm and your good to go.

Hi. Sent you a PM about a stock question. Thanking you in advance, Al

Well I figured something out you might appreciate. I'm going to order the ATI stock and mount an AK scope. I found this on GB and a Steel Mount plate to affix to the side of the ATI stock. Its a HI-Rise mount for AK's but should clear the Nagant bolt easily. Even if I have to mount it 1-2 inches forward to avoid the bolt handle I'm still closer than way up where the rear-sight type of mount would be. And no cutting of my Nagant BOLT to mount another type of scope mount I found earlier. Hi-Rise Mount Opinions??

You want to hear a SICK price. Local dealer wants $569 for the same STOCK gun 308/21". I WAS going to entertain the LOCAL guy with business till he got me the price. I'd rather give him $30 for the Xfer. thanks. Some places are CRAZY.

Thats pretty sweet. Nice finish. I think they also have a scope mount that sits back farther on the receiver vs. up on the old sight mount. I don't mind tapping a few holes to bring the eye piece (on the scope) back abit.

Thank you for clarifying.