sawx75 2 Posted December 12, 2009 Report Share Posted December 12, 2009 this is a totally different rifle once the conversion is done. It is balanced better, swings easier and it pulls right up tight to the body. I like the Warsaw stock. It just feels right. Test firing went without a problem, I can not remember the last time I had so much fun test firing. All told $225ish for the parts and $350 for the rifle, not bad. Now to get the PKAS setup. And I know, I know, pictures. As soon as I get a different paint job on there. The Engine enamel looks horrid. It does not match the rest of the gun at all. How tough is the betty crocker bake a gun stuff? Quote Link to post Share on other sites
kresk 10,063 Posted December 12, 2009 Report Share Posted December 12, 2009 Something like Brownell's Bake On Lacquer is extremely durable when properly applied to an appropriate surface. Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted December 13, 2009 Report Share Posted December 13, 2009 this is a totally different rifle once the conversion is done. It is balanced better, swings easier and it pulls right up tight to the body. I like the Warsaw stock. It just feels right. Test firing went without a problem, I can not remember the last time I had so much fun test firing. All told $225ish for the parts and $350 for the rifle, not bad. Now to get the PKAS setup. And I know, I know, pictures. As soon as I get a different paint job on there. The Engine enamel looks horrid. It does not match the rest of the gun at all. How tough is the betty crocker bake a gun stuff? Just curious. Which engine enamel did you use? The first one I used was awful (nasty - sticky - slow drying - tough to remove), the second was great, better than I could have expected. WS Quote Link to post Share on other sites
SaigaScott 6 Posted December 13, 2009 Report Share Posted December 13, 2009 this is a totally different rifle once the conversion is done. It is balanced better, swings easier and it pulls right up tight to the body. I like the Warsaw stock. It just feels right. Test firing went without a problem, I can not remember the last time I had so much fun test firing. All told $225ish for the parts and $350 for the rifle, not bad. Now to get the PKAS setup. And I know, I know, pictures. As soon as I get a different paint job on there. The Engine enamel looks horrid. It does not match the rest of the gun at all. How tough is the betty crocker bake a gun stuff? Just curious. Which engine enamel did you use? The first one I used was awful (nasty - sticky - slow drying - tough to remove), the second was great, better than I could have expected. WS What engine enamel did you use btw Waffen? Quote Link to post Share on other sites
imarangemaster 315 Posted December 13, 2009 Report Share Posted December 13, 2009 I used Rustoleum Black BBQ and stove paint. High heat and looks great, and pretty tough, though easy to touch up. Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted December 13, 2009 Report Share Posted December 13, 2009 this is a totally different rifle once the conversion is done. It is balanced better, swings easier and it pulls right up tight to the body. I like the Warsaw stock. It just feels right. Test firing went without a problem, I can not remember the last time I had so much fun test firing. All told $225ish for the parts and $350 for the rifle, not bad. Now to get the PKAS setup. And I know, I know, pictures. As soon as I get a different paint job on there. The Engine enamel looks horrid. It does not match the rest of the gun at all. How tough is the betty crocker bake a gun stuff? Just curious. Which engine enamel did you use? The first one I used was awful (nasty - sticky - slow drying - tough to remove), the second was great, better than I could have expected. WS What engine enamel did you use btw Waffen I asked you first, so if you tell me you used what I use, I'll know you're full of it, or didn't apply it properly. Duplicolor 500 degree low gloss black. Light coats applied as soon as they are dry to the touch. Dries quickly. Extremely durable. I have a diesel mechanic friend who rebuilds Peterbuilts, Kenworth engines, etc. Swears by it. Someone screwed around with him on an invoice, and he painted their engine pink (doesn't come in pink, but he managed it anyway - probably mixed red and white). Anyway - regardless of what Azrial says, it's great stuff. BTW, he'll be along shortly to tell you I'm full of shit. Don't listen!!! WS Quote Link to post Share on other sites
pm-40 0 Posted December 13, 2009 Report Share Posted December 13, 2009 this is a totally different rifle once the conversion is done. It is balanced better, swings easier and it pulls right up tight to the body. I like the Warsaw stock. It just feels right. Test firing went without a problem, I can not remember the last time I had so much fun test firing. All told $225ish for the parts and $350 for the rifle, not bad. Now to get the PKAS setup. And I know, I know, pictures. As soon as I get a different paint job on there. The Engine enamel looks horrid. It does not match the rest of the gun at all. How tough is the betty crocker bake a gun stuff? Just curious. Which engine enamel did you use? The first one I used was awful (nasty - sticky - slow drying - tough to remove), the second was great, better than I could have expected. WS What engine enamel did you use btw Waffen I asked you first, so if you tell me you used what I use, I'll know you're full of it, or didn't apply it properly. Duplicolor 500 degree low gloss black. Light coats applied as soon as they are dry to the touch. Dries quickly. Extremely durable. I have a diesel mechanic friend who rebuilds Peterbuilts, Kenworth engines, etc. Swears by it. Someone screwed around with him on an invoice, and he painted their engine pink (doesn't come in pink, but he managed it anyway - probably mixed red and white). Anyway - regardless of what Azrial says, it's great stuff. BTW, he'll be along shortly to tell you I'm full of shit. Don't listen!!! WS I also used the Dupli , and think it looks great . Quote Link to post Share on other sites
oldandslow 3 Posted December 16, 2009 Report Share Posted December 16, 2009 I used Rustoleum Black BBQ and stove paint. High heat and looks great, and pretty tough, though easy to touch up. Very nice. Looks like a real AK47. Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted December 16, 2009 Report Share Posted December 16, 2009 (edited) I used Rustoleum Black BBQ and stove paint. High heat and looks great, and pretty tough, though easy to touch up. Very nice. Looks like a real AK47. OK PA, Mav, and Shooter - Corrected answer.... It is not an AK 47 and does not look like one as it has a stamped and not a milled receiver. Therefore it looks - well sort of - like an AK 103, albeit a bastard version. Now, you have insisted on making me, and the OP look like total asswipes. Happy with yourselves? Condescend much? (Does not apply to Brits as answer becomes rhetorical) WS Edited December 16, 2009 by WaffenSchmied Quote Link to post Share on other sites
shades_of_grey 1,092 Posted December 16, 2009 Report Share Posted December 16, 2009 (edited) I used Rustoleum Black BBQ and stove paint. High heat and looks great, and pretty tough, though easy to touch up. Very nice. Looks like a real AK47. That's because that is exactly what it is:) WS I held back from replying to oldandslow's original comment, but now that you've seconded it, WS, I can't continue to do so. imarangemaster's rifle is not "a real AK47", it is basically an AK-103, (with wood furniture), minus selective fire and the OEM folding stock, (similar to a SGL rifle built by Legion). The differences between the two rifle designs are not huge, but they are significant. Edited December 16, 2009 by post-apocalyptic Quote Link to post Share on other sites
mav 459 Posted December 16, 2009 Report Share Posted December 16, 2009 And as was pointed out somewhere else earlier, a "real" AK47 is a milled receiver, stamped are AKM. Quote Link to post Share on other sites
22_Shooter 1,560 Posted December 16, 2009 Report Share Posted December 16, 2009 OF COURSE we were right. Congrats on the conversion. Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted December 16, 2009 Report Share Posted December 16, 2009 (edited) See the "Journalists Guide to Firearms Identification" for further clarification. I rest my case. WS Edited December 16, 2009 by WaffenSchmied Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted December 16, 2009 Report Share Posted December 16, 2009 this is a totally different rifle once the conversion is done. It is balanced better, swings easier and it pulls right up tight to the body. I like the Warsaw stock. It just feels right. Test firing went without a problem, I can not remember the last time I had so much fun test firing. All told $225ish for the parts and $350 for the rifle, not bad. Now to get the PKAS setup. And I know, I know, pictures. As soon as I get a different paint job on there. The Engine enamel looks horrid. It does not match the rest of the gun at all. How tough is the betty crocker bake a gun stuff? Congratulations on a beautifully converted Saiga. WS Quote Link to post Share on other sites
Azrial 1,091 Posted December 16, 2009 Report Share Posted December 16, 2009 (edited) ... Anyway - regardless of what Azrial says, it's great stuff. BTW, he'll be along shortly to tell you I'm full of shit. Don't listen!!! WS Nonsense! I yield to your obviously considerable expertise in applying cheap crappy paint jobs to AKs from materials found at your better Wal-Marts and as recommended by top diesel mechanics! Next we will feature a report on the best brand fuel regulators to keep your 1898 -1996 Peterbilt 376 motor in top running condition by a gunsmith that lives down the street! Stay Tuned! Edited December 16, 2009 by Azrial Quote Link to post Share on other sites
Lone Star Arms 2,047 Posted December 16, 2009 Report Share Posted December 16, 2009 ... Anyway - regardless of what Azrial says, it's great stuff. BTW, he'll be along shortly to tell you I'm full of shit. Don't listen!!! WS Nonsense! I yield to your obviously considerable expertise in applying cheap crappy paint jobs to AKs from materials found at your better Wal-Marts and as recommended by top diesel mechanics! Next we will feature a report on the best brand fuel regulators to keep your 1898 -1996 Peterbilt 376 motor in top running condition by a gunsmith that lives down the street! Stay Tuned! Thank you for your overdue capitulation on this issue Azrial. Not all of us finish our weapons with elixirs made of the rarest and most expensive materials, so that we may hang them on the wall as a shrine to the gods of war. Some of us just want to take those suckers out and shoot a couple hundred rounds without worrying about whether they get a nick or scratch on the $300 paint job. To each his own buddy;) It's good to know you're still following my posts with such vigor! ROFLMAO!!! WS Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.