ADavis 0 Posted August 9, 2008 Report Share Posted August 9, 2008 Inquiring about information concerning compensators for Beretta M9. Please email me directly with information at andavis2@yahoo.com. Thanks Link to post Share on other sites
darkdaysofoctober 0 Posted August 26, 2008 Report Share Posted August 26, 2008 Hi, I'm desperately searching for one or, best, two SGS compensators. If somebody has one to sell, don't hesitate to contact me, I will study any offer. Thanks a lot Pierre Link to post Share on other sites
darkdaysofoctober 0 Posted August 26, 2008 Report Share Posted August 26, 2008 Hi, I'm desperately searching for one or, best, two SGS compensators. If somebody has one to sell, don't hesitate to contact me, I will study any offer. Thanks a lot Pierre Link to post Share on other sites
RamboRyno 0 Posted November 11, 2008 Report Share Posted November 11, 2008 I am also looking for a sgs compensator and would like to know the company that carries or possibly makes them. Link to post Share on other sites
KySoldier 2 Posted December 14, 2008 Author Report Share Posted December 14, 2008 Since this thread pulls in alot of hits I'll announce it here- I WILL HAVE AN SGS COMPENSATOR FOR SALE I will be selling it for a friend through Gunbroker. Its not mine so no trade offers please. I've checked it out and it is in great shape. Has the usual wear along the inside where the pistol rubs it and of course has some powder residue as it has been used a little. Once the owner and I work out his payment methods I'll take pictures and post it on Gunbroker with a link here and in the Saiga forum's For Sale section. -KY Soldier Link to post Share on other sites
Viper1357 0 Posted December 14, 2008 Report Share Posted December 14, 2008 Thanks for the heads up.. I'll keep an eye out for it! Link to post Share on other sites
KySoldier 2 Posted December 22, 2008 Author Report Share Posted December 22, 2008 OK guys, the auction for the compensator is up and running- https://www.gunbroker.com/Auction/ViewItem....?Item=119025094 Link to post Share on other sites
ArmyMSG 0 Posted December 22, 2008 Report Share Posted December 22, 2008 Is that silver or black? Can't tell with the reflection. Link to post Share on other sites
KySoldier 2 Posted December 22, 2008 Author Report Share Posted December 22, 2008 Is that silver or black? Can't tell with the reflection. All black finish over aluminum. Not a scratch on it, except for the two bars that run under the slide, you can see the reflection where its been rubbed. These fit fairly tight but still rub against the slide and frame a bit as you fire due to the pressure. If you'd like different photos at different angles let me know. I don't mind. Link to post Share on other sites
flipflargin 0 Posted December 22, 2008 Report Share Posted December 22, 2008 Is that silver or black? Can't tell with the reflection. All black finish over aluminum. Not a scratch on it, except for the two bars that run under the slide, you can see the reflection where its been rubbed. These fit fairly tight but still rub against the slide and frame a bit as you fire due to the pressure. If you'd like different photos at different angles let me know. I don't mind. Well if you don't mind... could you take some close up pics of the comp showing each side, especially the back, top? I'd like to gather enough pics for a rough blueprint for this comp. If this doesn't provide enough detail, I can always bid for the actual product in hopes of working from the original. Link to post Share on other sites
KySoldier 2 Posted December 22, 2008 Author Report Share Posted December 22, 2008 Here's some high res images from different angles for those that are asking. Thanks for looking! Link to post Share on other sites
Wakko 10 Posted December 23, 2008 Report Share Posted December 23, 2008 Wow, that's a helluva return. Link to post Share on other sites
flipflargin 0 Posted December 23, 2008 Report Share Posted December 23, 2008 Here's some high res images from different angles for those that are asking. Thanks for looking! This must be Christmas, thank you! Link to post Share on other sites
mp5er 0 Posted December 25, 2008 Report Share Posted December 25, 2008 Will this compensator fit a stock 92fs? Link to post Share on other sites
KySoldier 2 Posted December 26, 2008 Author Report Share Posted December 26, 2008 Will this compensator fit a stock 92fs? Yes I ran two of them, one on a 92F, the other a 92FS, as seen below. As to other 92 variants or the Taurus clone, I don't know, it was only designed for the 92F. The 92FS model just has an internal change to meet DoD demands for the military contract. Link to post Share on other sites
KySoldier 2 Posted December 28, 2008 Author Report Share Posted December 28, 2008 The auction has ended and the winning bidder is being emailed. On behalf of the compensator's owner and myself, thanks to all that took an interest Link to post Share on other sites
Ynot0323 0 Posted December 31, 2008 Report Share Posted December 31, 2008 Will these work on a 92 compact ??? Tony Link to post Share on other sites
KySoldier 2 Posted December 31, 2008 Author Report Share Posted December 31, 2008 I'm not fimiliar with that model but I'm guessing the barrel is shorter which means the guide rod is shorter so I'd say no. But the one I was able to auction for a friend is gone now. Link to post Share on other sites
KySoldier 2 Posted February 22, 2009 Author Report Share Posted February 22, 2009 I'm auctioning my personal compensator for the Beretta 92, last one- http://www.gunbroker.com/Auction/ViewItem.asp?Item=123526934 Link to post Share on other sites
yay 0 Posted February 24, 2009 Report Share Posted February 24, 2009 Will they work with the 90-two or the M9A1? Link to post Share on other sites
adavid02 0 Posted February 24, 2009 Report Share Posted February 24, 2009 lol close this thread! Link to post Share on other sites
KySoldier 2 Posted February 27, 2009 Author Report Share Posted February 27, 2009 Will they work with the 90-two or the M9A1? I'd say not, assuming the guide rod is identical, the rail would almost certainly be in the way. lol close this thread! Why? Cause it has 26,000+ views? Link to post Share on other sites
Racer 27 37 Posted March 3, 2009 Report Share Posted March 3, 2009 (edited) 27,077 now do a google search for this people. I believe on Beretta talk there is a guy that is making a copy of these. I'll try to remember to look for the link later tonight, I think its on my computer at home. Edited March 3, 2009 by Racer 27 Link to post Share on other sites
jakeallen 0 Posted May 8, 2009 Report Share Posted May 8, 2009 Hey guys, I know a guy selling Beretta 92 profile compensators. I got a couple and shot w/ em last weekend...Awesome! If anyone is interested let me know. Here's my 92F and 92FS fitted with them. I would like to get some info on the compensator's plz. Link to post Share on other sites
6500rpm 670 Posted May 31, 2009 Report Share Posted May 31, 2009 To add to the thread that won't die, this is the information on the new compensators being made (one of several threads). http://www.berettaforum.net/vb/showthread.php?t=50075 Link to post Share on other sites
RangerM9 1 Posted June 5, 2009 Report Share Posted June 5, 2009 holy hell....this thing is still going? Link to post Share on other sites
chevymock 0 Posted July 16, 2009 Report Share Posted July 16, 2009 Hey guys, I know a guy selling Beretta 92 profile compensators. I got a couple and shot w/ em last weekend...Awesome! If anyone is interested let me know. Here's my 92F and 92FS fitted with them. Hello do you still have them 4 sale? Link to post Share on other sites
6500rpm 670 Posted July 16, 2009 Report Share Posted July 16, 2009 John, look at the date on the thread^^^. These are no longer made by SGS. Best bet is to keep searching or click on the link in my post (two up), but they're not even close to the prices posted in this thread. Link to post Share on other sites
mohctep 1 Posted August 21, 2009 Report Share Posted August 21, 2009 STILL going-and I STILL want one! Link to post Share on other sites
heherrera 0 Posted August 1, 2010 Report Share Posted August 1, 2010 "Hey guys, I know a guy selling Beretta 92 profile compensators. I got a couple and shot w/ em last weekend...Awesome! If anyone is interested let me know. Here's my 92F and 92FS fitted with them." DO YOU STILL KNOW THIS GUY? I've been looking for this for years!! Link to post Share on other sites
Recommended Posts