Mr.BlahX3 12 Posted March 14, 2013 Report Share Posted March 14, 2013 (edited) My back ordered gun should be shipping in the next day or two. I like the idea of a flash hider type device, I know there's a "tactical choke" available. And there's an adapter to allow the use of Saiga muzzle devices, do they make the barrel too long? Are there other options? Are there any comparisons or reviews online, my google skills are not helping. Thanks. Edited March 14, 2013 by Mr.BlahX3 Quote Link to post Share on other sites
bulliedgoon 0 Posted March 14, 2013 Report Share Posted March 14, 2013 I like the look of the shrouds Quote Link to post Share on other sites
Mr.BlahX3 12 Posted March 14, 2013 Author Report Share Posted March 14, 2013 Is that a shroud for a Saiga with the adapter? Quote Link to post Share on other sites
bulliedgoon 0 Posted March 14, 2013 Report Share Posted March 14, 2013 Yes sir. http://cadizgunworks.com/store/index.php?route=product/product&path=18&product_id=61 http://store.carolinashooterssupply.com/servlet/-strse-1517/Saiga-12-Raptor-Shroud/Detail Quote Link to post Share on other sites
SHOTGUN MESIAH 855 Posted March 16, 2013 Report Share Posted March 16, 2013 I like the look of the shrouds WOW that does look nice. how far out does that extend from the end of the stock barrel ? Quote Link to post Share on other sites
bulliedgoon 0 Posted March 16, 2013 Report Share Posted March 16, 2013 WOW that does look nice. how far out does that extend from the end of the stock barrel ? Thanks! The adapter extends the barrel 3/4 of an inch. The "brake" part of the shroud extends 1 3/4 inches further after the end of the adapter. Quote Link to post Share on other sites
SHOTGUN MESIAH 855 Posted March 16, 2013 Report Share Posted March 16, 2013 so about 2 1/2" beyond stock. Is it a very solid mount or is there any play in the shroud ? Does it make contact with the barrel at all? That is really a good look for the MKA. Quote Link to post Share on other sites
SHOTGUN MESIAH 855 Posted March 16, 2013 Report Share Posted March 16, 2013 I also notice you have the T&N "Short" foreguard. Would this shroud work with the stock MKA " Long length" foreguard? Quote Link to post Share on other sites
bulliedgoon 0 Posted March 16, 2013 Report Share Posted March 16, 2013 It is very snug however slides off easy. It makes contact with the barrel towards the rear of the shroud closest to the foreguard and hugs the barrel nicely on my opinion. So far does not rattle. My measurements would say no it will not work. Unless you got a custom one measured to fit. Actually wish it was a 1/2 to 3/4 longer to fit closer to the foreguard Quote Link to post Share on other sites
1919 Shotty 2 Posted March 20, 2013 Report Share Posted March 20, 2013 How long is your hand guard? What level is it? Quote Link to post Share on other sites
toothandnail 275 Posted March 20, 2013 Report Share Posted March 20, 2013 We , will have a flash hider/breaching/ choke (modified) ready in about 4 weeks, we are working out the final stages of MFG now. 1 Quote Link to post Share on other sites
KIRCH76 12 Posted March 20, 2013 Report Share Posted March 20, 2013 matt how about a barrel shroud with a breacher.. Quote Link to post Share on other sites
SHOTGUNWIN 1 Posted March 21, 2013 Report Share Posted March 21, 2013 (edited) Bonesteel has one for 12ga......hope it is good .. Edited March 21, 2013 by SHOTGUNWIN Quote Link to post Share on other sites
bulliedgoon 0 Posted March 21, 2013 Report Share Posted March 21, 2013 How long is your hand guard? What level is it? I am currently traveling so maybe Matt can chime in on the length question. It's the level 10 Quote Link to post Share on other sites
toothandnail 275 Posted March 21, 2013 Report Share Posted March 21, 2013 Level 10 Shorty is 9.75" Quote Link to post Share on other sites
fritzthemoose 3 Posted March 23, 2013 Report Share Posted March 23, 2013 My back ordered gun should be shipping in the next day or two.I like the idea of a flash hider type device, I know there's a "tactical choke" available. And there's an adapter to allow the use of Saiga muzzle devices, do they make the barrel too long? Are there other options? Are there any comparisons or reviews online, my google skills are not helping. Thanks. I went down the route midbarrel and for the muzzle only a choke. mine is solely a competition gun and the midbarrel works just much better and also gives me the option of a choke. i do have a choke/comp combo on my saiga and it works fine but its not perfect either. of course after drilling 42 holes in the barrel you have to work on the gas system if you want the gun to cycle low brass Quote Link to post Share on other sites
duggr 13 Posted March 24, 2013 Report Share Posted March 24, 2013 Received My MkA 1919 Saiga Adapter today.....been thinking on a Saiga muzzle brake or something in that area.. I remembered that I had some threaded Saiga thread protectors lying around from the saiga I sold here on the forum years ago.... Quote Link to post Share on other sites
Mr.BlahX3 12 Posted March 24, 2013 Author Report Share Posted March 24, 2013 (edited) Looks good. I'm waiting for my adapter to arrive, I bought a USA copy of the Russian Saiga 12 muzzle device to use. http://store.carolinashooterssupply.com/servlet/-strse-182/SAIGA-12-DPH-FLASH/Detail Edited March 24, 2013 by Mr.BlahX3 Quote Link to post Share on other sites
duggr 13 Posted March 24, 2013 Report Share Posted March 24, 2013 I've still up in the air as to what I will get! I've thought about the Poly Choke II with the muzzle brake!....I've also thought about Barrell Shrouds with the built in muzzle bread... http://www.1alumalite.com/s12.html http://www.kineti-tech.com/saiga-12/ http://www.poly-choke.com/choke2.htm Quote Link to post Share on other sites
Madwand 2 Posted March 24, 2013 Report Share Posted March 24, 2013 I've also thought about Barrell Shrouds with the built in muzzle bread... Mmmmm, muzzle bread... Quote Link to post Share on other sites
duggr 13 Posted March 24, 2013 Report Share Posted March 24, 2013 LOL...I GUESS i was eating when i typed that...to big fingers for my android.... Quote Link to post Share on other sites
HK_Shawn 0 Posted March 24, 2013 Report Share Posted March 24, 2013 Here's mine using a Tome Cole choke adapter and a vepr12 muzzle brake. i dont like the fact i cant run a choke so I might have a local machine shop hog out the threads and tap it for set screws. Quote Link to post Share on other sites
HK_Shawn 0 Posted March 24, 2013 Report Share Posted March 24, 2013 http://store.carolinashooterssupply.com/servlet/-strse-408/Saiga-12-Competition-brake/Detail my mistake, its a JT comp brake Quote Link to post Share on other sites
toothandnail 275 Posted March 24, 2013 Report Share Posted March 24, 2013 What constriction choke do most of you run ? We use Mod the most , followed by Full & Extra Full. We plan on offering our Brake/choke in Mod first followed by Full, depending on demand. Quote Link to post Share on other sites
duggr 13 Posted March 24, 2013 Report Share Posted March 24, 2013 "i dont like the fact i cant run a choke" Thats why I was thinking of using the polychoke II....Has anyone here used one? http://www.poly-choke.com/choke2.htm Quote Link to post Share on other sites
congewe 14 Posted March 25, 2013 Report Share Posted March 25, 2013 I'm running a Carlson's Sporting Clays Extended Choke Tube 12 Gauge Light Modified Quote Link to post Share on other sites
compshootfl 40 Posted March 25, 2013 Report Share Posted March 25, 2013 (edited) I run a few different chokes from (barrel, mod, imp. mod)---Comp-N-Choke. They seem to keep the muzzle down a bit, but I like the fact I can choose my chokes according to the stage and quickly srew in the one I want. LINK Edited March 25, 2013 by compshootfl Quote Link to post Share on other sites
fritzthemoose 3 Posted March 25, 2013 Report Share Posted March 25, 2013 "i dont like the fact i cant run a choke" Thats why I was thinking of using the polychoke II....Has anyone here used one? http://www.poly-choke.com/choke2.htm i have the maxrounds polychoke comp on my saiga works fine but its easy to forget which position you are in in case of the maxrounds. still not sure if i had the correct one set at some stages of the world shoot or if i just screwed up myself lol Quote Link to post Share on other sites
1919 Shotty 2 Posted March 25, 2013 Report Share Posted March 25, 2013 I like the look of the shrouds Do y'all make a smaller operating rod for the MKA? I bought an MKA to Saiga thread adapter and a saiga muzzle shroud hits the operating rod, and I need a smaller operating rod and hand guard so I can use this shroud. Do y'all make one for a Shorty hand guard? If so, how much? Quote Link to post Share on other sites
toothandnail 275 Posted March 26, 2013 Report Share Posted March 26, 2013 We have one spec'd out and drawn in CAD , just a matter of finding machine time to get it made. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.