gose 17 Posted May 17, 2013 Report Share Posted May 17, 2013 (edited) Is it possible to thread an MKA XN barrel to allow for a Tromix monster or mini monster brake? Or any good brake, really, Im not picky.. I just need something good There's the shark brake, but I want one of the more effective brakes and I'm somewhat sceptical about just loctiting a brake on a 3-gun that will get bumped into barricades and tossed into dump barrels Edited May 17, 2013 by gose Quote Link to post Share on other sites
AR-12 Shotgun 16 Posted May 20, 2013 Report Share Posted May 20, 2013 (edited) Have you seen the T&N breaching brake? It's pretty bad. Dump barrels beware... http://www.toothandnailarmory.com/product/TN045.html Edited May 21, 2013 by AR-12 Shotgun Quote Link to post Share on other sites
MKAVinny 4 Posted May 21, 2013 Report Share Posted May 21, 2013 You can use this thread adapter to put Saiga 12 muzzle brakes on your MKA. http://cadizgunworks.com/store/index.php?route=product/product&product_id=61 Quote Link to post Share on other sites
duggr 13 Posted May 21, 2013 Report Share Posted May 21, 2013 I have the MKA to Saiga thread adaptor that i use for now when shooting Slugs....I keep a saiga 12 thread protector over it for now as i was thinking Of going with MUZZLE products offered for the saiga 12...NOW THAT T@N Has a sweet comp with choke i'm deffinately going to get the T@N... Quote Link to post Share on other sites
gose 17 Posted May 21, 2013 Author Report Share Posted May 21, 2013 Have you seen the T&N breaching brake? It's pretty bad. Dump barrels beware... http://www.toothandnailarmory.com/product/TN045.html It might look cool, but that thing is going to be pretty useless as a brake for competition use. For an end of barrel shotgun brake you need something _big_. I also need to be able to change chokes, so the choke adapter isnt really going to work. It would be too much of pain to switch the whole thing between stages. I need something like this: or this The Firebird brake makes a pretty good job, but since there is room for another brake at the end of the barrel, why not add one? 1 Quote Link to post Share on other sites
MKAVinny 4 Posted May 21, 2013 Report Share Posted May 21, 2013 Does that Molot do a damn thing? Quote Link to post Share on other sites
rapidrpr 3 Posted May 21, 2013 Report Share Posted May 21, 2013 (edited) is silver soldering a brake on a short barrel considered a permanent attachment to make it overall 18" legal? mka1919. Edited May 21, 2013 by rapidrpr Quote Link to post Share on other sites
compshootfl 40 Posted May 21, 2013 Report Share Posted May 21, 2013 Gose...Who makes the top one, is it for a shotgun ? Quote Link to post Share on other sites
gose 17 Posted May 21, 2013 Author Report Share Posted May 21, 2013 Gose...Who makes the top one, is it for a shotgun ? AFAIK, its was originally made by Molot for the VEPR 12. Looks like CSS is making a copy of it here in the US: http://store.carolinashooterssupply.com/servlet/-strse-1577/MOLOT-GK-dsh-01-VEPR-SAIGA/Detail Quote Link to post Share on other sites
compshootfl 40 Posted May 21, 2013 Report Share Posted May 21, 2013 Thanks ! Quote Link to post Share on other sites
gunfun 3,931 Posted May 21, 2013 Report Share Posted May 21, 2013 You guys know that tromix makes a shark brake for the 1919-right? No mods needed and you can still use your chokes. Obvious choice to me. 1 Quote Link to post Share on other sites
gose 17 Posted May 21, 2013 Author Report Share Posted May 21, 2013 You guys know that tromix makes a shark brake for the 1919-right? No mods needed and you can still use your chokes. Obvious choice to me. Yeah, I think I mentioned that in my original post Maybe I'll try one just for the heck of it in case nothing else can be figured out, but (afaik) the shark brake is inferior to the GK01 and monster brake and Id rather try for the most effective/best solution first. Quote Link to post Share on other sites
gunfun 3,931 Posted May 21, 2013 Report Share Posted May 21, 2013 Maybe a little less braking force, but also less weight. GKO1 is very difficult to satisfy chop and perm rules with if that is your plan, because of it's two piece design. If you are going for extremes, maybe look into Firebird's comp that goes about 2/3 down the barrel. Quote Link to post Share on other sites
gose 17 Posted May 21, 2013 Author Report Share Posted May 21, 2013 Maybe a little less braking force, but also less weight. GKO1 is very difficult to satisfy chop and perm rules with if that is your plan, because of it's two piece design. If you are going for extremes, maybe look into Firebird's comp that goes about 2/3 down the barrel. The plan was just to add it to the end, dont really mind if it gets a little longer. I have a Firebird racegun, so it has the 2/3 brake on already... I just wanted MOAR! Quote Link to post Share on other sites
gunfun 3,931 Posted May 21, 2013 Report Share Posted May 21, 2013 It's been done, but your mid is venting most of the working pressure. you aren't going to gain much more by adding comps 6" after a vent. Quote Link to post Share on other sites
compshootfl 40 Posted May 21, 2013 Report Share Posted May 21, 2013 (edited) Unfortunately, the Tromix brakes are non existant. Edited May 21, 2013 by compshootfl Quote Link to post Share on other sites
Syndicate 812 Posted May 22, 2013 Report Share Posted May 22, 2013 Unfortunately, the Tromix brakes are non existant. Que? Quote Link to post Share on other sites
compshootfl 40 Posted May 22, 2013 Report Share Posted May 22, 2013 (edited) I just looked on both websites that carry them...out of stock. I like the Tromix brake, I wonder if he has ever thought of a clamp on style ? Edited May 22, 2013 by compshootfl Quote Link to post Share on other sites
Rebel Katt 6 Posted May 22, 2013 Report Share Posted May 22, 2013 Have you seen the T&N breaching brake? It's pretty bad. Dump barrels beware... http://www.toothandnailarmory.com/product/TN045.html What's a dump barrel? RK Quote Link to post Share on other sites
snwbrdrcr 17 Posted May 22, 2013 Report Share Posted May 22, 2013 The barrel that you "dump" or set your rifle or shotgun into when transitioning to the next weapon in multigun competition. Quote Link to post Share on other sites
AR-12 Shotgun 16 Posted May 22, 2013 Report Share Posted May 22, 2013 Have you seen the T&N breaching brake? It's pretty bad. Dump barrels beware... http://www.toothandnailarmory.com/product/TN045.html What's a dump barrel? RK It was a lousy attempt at humor. The OP was worried about damaging the choke when dumping his weapon. The T&N choke looks like it would have the opposite effect. Quote Link to post Share on other sites
gose 17 Posted May 22, 2013 Author Report Share Posted May 22, 2013 (edited) Have you seen the T&N breaching brake? It's pretty bad. Dump barrels beware... http://www.toothandnailarmory.com/product/TN045.html What's a dump barrel? RK It was a lousy attempt at humor. The OP was worried about damaging the choke when dumping his weapon. The T&N choke looks like it would have the opposite effect. I wasnt really worried about damaging the choke or the gun, all my guns are pretty beat up from years of 3-gunning... However, for a big match, I'm not sure I'd trust a comp that's only secured with loctite no matter how good their marketing material is... Edited May 22, 2013 by gose Quote Link to post Share on other sites
Venomous 1 Posted May 24, 2013 Report Share Posted May 24, 2013 You can use this thread adapter to put Saiga 12 muzzle brakes on your MKA. http://cadizgunworks.com/store/index.php?route=product/product&product_id=61 Any idea what kind of choke that adapter would be like? Full Choke?? Quote Link to post Share on other sites
duggr 13 Posted May 24, 2013 Report Share Posted May 24, 2013 I have one its a open choke for slugs. Mine measures .730 I.D. Quote Link to post Share on other sites
Rebel Katt 6 Posted May 24, 2013 Report Share Posted May 24, 2013 The barrel that you "dump" or set your rifle or shotgun into when transitioning to the next weapon in multigun competition. Oh, okay- one thats gonna get some abuse... Quote Link to post Share on other sites
gunfun 3,931 Posted June 6, 2013 Report Share Posted June 6, 2013 You can use this thread adapter to put Saiga 12 muzzle brakes on your MKA. http://cadizgunworks.com/store/index.php?route=product/product&product_id=61 Any idea what kind of choke that adapter would be like? Full Choke?? Whatever Win/Invector choke you screw into it. i.e. full, mod, imp. turkey, extra gimmick, rifled... Quote Link to post Share on other sites
gose 17 Posted June 7, 2013 Author Report Share Posted June 7, 2013 You can use this thread adapter to put Saiga 12 muzzle brakes on your MKA. http://cadizgunworks.com/store/index.php?route=product/product&product_id=61 Any idea what kind of choke that adapter would be like? Full Choke?? Whatever Win/Invector choke you screw into it. i.e. full, mod, imp. turkey, extra gimmick, rifled... The adapter seems to replace the choke as it screws into its place, so what are you screwing the chokes into? Quote Link to post Share on other sites
gunfun 3,931 Posted June 7, 2013 Report Share Posted June 7, 2013 Sorry my mistake. I got that confused with another product I think he is or was making. You could probably call and ask him. My guess is that it is going to be cylinder bore unless otherwise noted. Quote Link to post Share on other sites
gose 17 Posted June 7, 2013 Author Report Share Posted June 7, 2013 Sorry my mistake. I got that confused with another product I think he is or was making. You could probably call and ask him. My guess is that it is going to be cylinder bore unless otherwise noted. Got me all excited there for a second Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.