MadDog

Uhmm madDog, that is the preorder list from last summer... so if you just ordered a couple mags, you won't be on there...... Thanks for the info! I guess I really don't have to rush too much on a Saiga .308!

I ordered two mags and I don't see my zip on the list (30741). Heck I don't even own a Saiga in .308 (yet) so I am not too worried... MadDog

Come on SOMEONE has to post some 10rd mags for sale!!! Let me be the 1st... 10rd AGP Saiga 12 mags for sale for 1 million dollars each! Willing to negotiate a little (but not much) MadDog p.s. this is a joke as I ain't selling my mags either unless your loaded

I don't think this would be an easy route because once you have the approved form 1 back from the ATF it is an NFA firearm. Once that has happened you cannot send it anywhere without approved paperwork from the ATF. Not only do you have to get a form approved from the ATF to send it to Tony (or any licensed gunsmith) but - IIRC - he cannot send it directly to you but it has to go through a licensed dealer. - I could be wrong on this. It has been years since I have had to do any paperwork with my Class 3 weapons and I know a lot has changed. The posts from jcmfirearms seem to be the mo

Who Cares? More Saigas for you and I.

You mean like this: My ACE stock folds to the right (it will fold in either direction by reversing the hinge). I can shoot it folded with one hand (just don't limp wrist it) after polishing the hammer face and the bottom of the bolt with a dremmel tool. I did lower the stock like the poster above suggested. This actually allows me to use the sights!!! MadDog

You could do a form 1 then after it's approved cut the barrel and mark the gun. Then send it to Tony for a little tune up. This would allow you to actually shoot the gun while you are waiting on forms to be approved. You will still have to get in line for Mr. Saiga (Tony)..MadDog

Yes Welcome....May the Saiga Force be with you young Jedi...

Get a chair, lay the gun in the chair and sit on the stock with the gun between your legs. Wiggle the gun back and forth while you are sitting on the stock. Keep constant pressure (pull on the gun) while you are wiggling the gun back and forth. The stock will s l o w l y come out of the gun. I have done three this way...MadDoggy

Dang!! I will take 4 mags... MadDog

NICE!!!

As many as you can get... They are hard to come by in the States at the moment! Really I like to have at least 10 mags for each weapon (or more)

Tony at Tromix has his trigger guards for sale...

Just be sure that you don't get your customer in trouble - like when someone try's to send something to the USA that is restricted here but not there...

THANKS TONY!! These are DA BOMB man! I just received one of the new style Flash Hiders and a bayo lug and AM IMPRESSED. Gentlemen if you want one DON'T WAIT. I'll get some picks up later... MadDog (DeWayne)

Ditto!!!

Here is one of my SKS Paratroopers w/USA parts...heheh

Ian, YOU ROCK! I can't wait...MadDog

OUTSTANDING!!!!!!!

or anything else for that matter... http://www.wired.com/wired/archive/13.09/f...w=wn_story_top5 MadDog

I used orange electrical tape. Draw the hole in pencil then tape around the hole. Then use the dremmel with TWO cutoff wheels (the thin ones). Dremel the four sides of the square hole. The plug will fall out. Then use either the dremel to square the corners or a triangle file. Cutting the hole was the last part of my conversion because I thought it would be the hardest part. It was the easiest part by far. On Saiga-12 #2 I didn't cut the hole at all. I just used the rear hole in the Tapco SAW grip as it lined up with the old square trigger hole...MadDog

Shooter2, Do you want to sell the ACE folding stock that you "ditched" as I need another one for Saiga-12 numba 2... MadDog

I have the 1/2 inch ACE pad on mine...

If Cobra changes his mind on the mags...LET ME KNOW

C00L! Thanks Tony!!! MadDog (DeWayne)