Mullet Man

Anybody else work outside all year round?

Seriously? It's a nut, you use a twisting and turning action to tighten things with threads. Put the tip of the screw driver in one of the slots and gently tap the screwdriver handle following the turning motion of the nut as it follows the threads in a tightening pattern. I don't know how else to explain it. It should be pretty Fuckin self explanatory.

Was the same here except we got 10" of snow two weeks before Christmas and now it's all gone. Temps have been dropping like crazy today and it's FN windy.

If it's the same style security nut as on the V12, just use a flat head screw driver and a hammer and tap it until it's tight.

I just didn't feel like arguing. Everyone is entitled to an opinion, huh?

Nice. Friend of mine has a Marlin in 45-70, I was surprised how "tame" it is out of such a light gun, relatively speaking of course. Definitely makes steel ring a nice tone.

Just for the record, BO falls quite short of the issued EO 'record'. Beaten by 2 well liked Republican Presidents..... http://www.presidency.ucsb.edu/data/orders.php Just saying. Some of the numbers by a few ex CiC's is absolutely astounding.

Seems like a whole lot of expense for a free drill press when you could just spend the same amount and get a good 120/240 unit (with a warranty) and not deal with any of the extra. It's just a drill press after all.

Wasn't suggesting that, just saying that model requires 3 phase 480v power. Most residential garages and shops only have single phase power (fed off of one transformer), which you are able to get 120/240v from. Getting true 3 phase power requires a bank of transformers at the pole, or a 3 phase underground transformer and a complete service upgrade from the transformer(s) to the building and then upgrade from fuse panel to the machine. $$$$$ I'm not familiar with the emulators, altho I have heard of them. Are you able to get a simulated third phase from a 2 wire, 240v setup? Then on top of

Do you have access to 3 phase power too?

"Ooooohh....Fuuuuuuuuuuuudddgge!"

It's possible. You have it documented now by contacting them. Use it, if something breaks, contact them again.

Looks quality. Did you contact DDI? I'd start there if you haven't.

Slightly run a small drill into the scratch, to create a dimple/divot.

Dimple deep enough in the lever scratch to catch the safety detent.

If you're talking about the shape and styling, it has to be that way to fit it's unique action. When the bolt goes back, it pushes the slider down. This is why Vectors have so little vertical muzzle climb. This video shows it pretty well. https://youtu.be/XT3526Fpr3Y?t=1m10s Very cool. I just never researched them before. thanks.

I just checked that out. A little too futuristic for me. Stumbled across the Kaw Valley linear Comp specifically for 9mm in 1/2-28, I might give that a try. What are you planning on for a PCC? Illinois=Suppressors are illegal. Altho the grass roots is shaking the tree right now to get a bill passed, to legalize them. Thanks. Not sure if I want to get the handguard Cerakoted in OD, or just go with black furniture instead. I like it! Touche' Only thing I've liked from KelTec was the PMR30.

Very cool. Altho I will say I never understood those. As in why is there so much going on with them?

Here is mine (90% finished).... PSA dedicated Colt mag lower. Anderson lightweight A3 upper (no dust cover or forward assist). 16" Faxon Gov't profile lightweight 9mm barrel. ALG EMR V2 13" free float M-lok handguard. Magpul SL grip and fixed carbine stock. Still need BCG and muzzle device (1/2"x28), suggestions? Putting an Aimpoint PRO on it (going back to a carry handle on my 20") and Magpul MBUS pro sights.

Link clearly states they expect that item to be AVAILABLE in January of '17.

Contact them.

There is no way to confirm. Due to variations in parts and assembly, two same model AK's could show two different final positions of a side rail. This is why RSRegulate uses centering adjustment in their 100% US made high quality mounts.

http://stores.csspecs.com/saiga-20-gauge/ Whats wrong with those?

ALG EMR V2 13" free float rail and backordered a set of Magpul MBUS Pro flip sights all for the 9mm build.

US FCG, US pistol grip and only use US magazines.