Jump to content

Arnisandyz

Member
  • Content Count

    36
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Arnisandyz

  • Rank
    Member
  1. Hanguard looks ilike a dragunov modified to fit?
  2. They carry bipods at your friendly neighborhood drug store? All we have are bandaids and tampons.
  3. I'd be interested in a quad once I get my gun working properly.
  4. If you are talking about removing the entire gas block, it's on there tight. After removing the 2 lower pins, if you have access to a hydraulic press use it, otherwise you'll have to do what other people have done and stick a piece of heavy metal or brass in between the barrel and gas tube and start whacking away with a big hammer. The 20 is on there TIGHT.
  5. The Limbsaver is a custom grind to fit model 10544 I bought here http://www.walnutcre...hmdtda19i3ksqv7 I was all ready to fabricate an adapter plate but was happy to find that the holes line up close enough to go directly into the Tapco Warsaw stock. It will probably work BETTER with a standard wood WARSAW stock because you can plug the existing holes and drill new ones into the solid wood that perfectly match the mounting holes for the stock. The is plenty of material on the recoil pad as it comes to cover a wide range of stocks. You'll need to square up the stock so its flat on a
  6. Here is limbsaver Uploaded with ImageShack.us Uploaded with ImageShack.us
  7. Ah, Jessie Abbate. Last I heard, she was shooting for S&W now. She's not listed on Team Glock's website anymore either. She's smoking hot. Yeah I heard she dropped Glock and maybe the next sponsor will take a photo that does her justice. Yeah, Just like Julie G she went from Glock to S&W. S&W now has a really strong women's team with Kay M., Julie and Jessie.
  8. Mine said 2001 with all the other roll marks on the receiver.....I assumed it was the year of manufacture.
  9. I might get blasted for this...but those small pocket guns like the Kel-Tec, Khar etc. aren't really meant to be shot a lot. Think about this, would you trust that little Kel-Tec or a Glock/XD/M&P to put 20k rounds through it over the course of a year? They are great for what they are intended for (deep concealment) and are ok to be shot occationally but for a CCW, primary and ONLY handgun I would suggest something more robust. A G19 is about the perfect size for a gun that fits a multi-role. You can carry it everyday, train with it without worrying about it breaking, shoot it in ID
  10. I have a 10" 9mm AR15. Takes UZI and Colt mags. You'll need a tax stamp if you want a barrel less than 16" but it is more "subgun" like. I shot a class 3 sub-gun match with it, won semi and also beat all the select-fire/full auto shooters. FA is overrated IMO.
  11. Probably because of this from the OP... "Wants a semiauto"
  12. budsgunshop also has a used section. I see a 2nd Gen G17 for $369, an XD for $379, a CZ for $389, a Sig etc...lots of guns under $400. FREE shipping and no tax, just have to pay the FFL transfer and background check so figure another $35-40. Any of them would be under the $450 limit. CDNN has good deals as well.
  13. Any of the polymer guns mentioned (Glock, XD, M&P) may cost a little more but their value and the gun itself is going to be better. The M&P has a $50 rebate and I've seen them for around $500 new. With tax and background check its going to put him over his limit. I don't know about you, but I'd skip a couple lunches and cut back on a few other things to come up with the extra cash before cheaping out with a Hi-point pistol. Like others have said, check the used market. I've seen Glocks for $375 before. I just sold a well worn but still serviceable M&P to a friend for $350..
  14. Just for reference, mine came with 3 holes from the factory, built 2001.
  15. Thanks. IIRC I cut very close to .75 as well. After some grinding and filing to get the muzzle square I ended up with .608 (close to light modified or IC for a 20 gauge). Should be perfect but I haven't patterned it yet.
×
×
  • Create New...