Goldeneagle76

what are you selling them for? And how many do you have?

Loner in Delaware here?

title says it all. Looking for 100 or so rounds.

PM sent

http://www.theblaze.com/stories/2013/02/15/group-of-second-amendment-supporting-gun-makers-now-refusing-to-sell-arms-to-law-enforcement-in-new-york-and-other-gun-restricting-states/

lucky for me my local shop still has primers, just bought some small rifle and pistol the other day.

I had the Classic 4-hole turret for years and it was a nice press. Never had problems with it. Got a bunch of Cabelas giftcards for Cabelas which is why I went to the Hornady LNL.

Ran Fed bulk through mine for the first time a couple days ago and they were ejecting about 3-4 feet out

Yeah, I just ordered one a week ago and was hoping to find all the cool testimonies about my future folder. Can't wait to ditch the Kvar stock!

For rifle I have 3 presses set up, a Lee Classic cast press, old Herters press and an RCBS Rockchucker Jr. Each set up for different stages of the load. For pistol rounds I bought the Hornady Lock n Load progressive.

www.Aimsurplus.com and Www.Targetsportsusa.com

I'm gonna give it another whirl and if it is still giving me issues, you'll see it for sale. My gun feels pretty slick, bolt was not profiled but I did polish it and the rails.

It runs just fine with stock plug in it on setting 2, ports have all been drilled out. Don't think it's under-gassed.

that 223 to the knee wound was nasty. the guy's whole shin was missing.

Is this a common occurrence? I have the JTE Performance mainspring...the hook on the spring closest to the BHO lever likes to walk off the trigger and fall down rendering the trigger useless. Is there a certain bend I should put in this to stop it from happening? Was also wondering why there couldn't be a little groove cut (like done on the BHO lever) so that this would not happen. Any responses are appreciated.

tried installing one today on mine. I was running Federal Target (1145fps) on setting #2 on my stock plug perfectly. Did like you did and screwed autoplug in til it bottomed out then turned it back til the detent was seated in the recess. I did 1/2 turn increments for about 4+ full revolutions and it would still not cycle the same Federal I was just shooting. Took it out and put the factory back in and functioned fine again. Kept factory plug in from there on out.

only if it is listed as tactical camo...then cha ching!!!

I think the OP edited the pics, now they work. In today's market I would say in the $1000 range. Edit: not saying this is what I would pay, but with the way things are right now, there are alot of people not thinking with a clear mind.

yeah, hoping they will break open a case and let me buy a couple boxes first. I have just opened up my ports and smoothed all the internals so hopefully cycling won't be an issue.

attachments are not working

Didn't see anything on search...anyone use it? My outdoor range is about 1.5 hours away and indoor range does not allow bird shot. Range has cases of this stuff at a decent price and was wondering if anyone had any +/- to say about it. Think it is rated at 1200fps.

I recommend putting a wooden dowel inside the barrel while drilling, prevents any chance of nailing the inside of the barrel. I had one sitting in the garage that was a little smaller than the inside barrel diameter and it worked great.

Best, don't know. I know I do like my Tromix mini monster brake. Tames muzzle flip and looks pretty bad-ass too.

good, get started on a 410 so you can let me know what differences there are between it and the 12.

I have the same 412NM model and per Chaos, like everyone is saying, it is in the works. For now, i bolted on a magpul rail to the lower handguard and added a magpul AFG. My ports were very small, but other than that, my Legion has been awesome!