bobabuee

yes, it will work only thing the little nipple I that scratches the reciver is in different place so it would put new scratch in diferent place a. you can file the nipple off or bend end out little b. buy right one same manfucture from CSS . but out stock right now c. keep your own and mod it and add solar tactical's extended safety lever, like $18.00 shipped

ya not talking about 20 round drums I was talking 12 round drums. promag sucks for mags I have 1000rds through my drums not a problem but I dont drop them to ground or throw them like some people do.

if like 12's get a 12 round promag drum less awkward compact had 8/10 round sgm mags I sold off 4 of them and bought 2 more 12rd promags great product.

I would shoot some more rds through it maybe 100 or so if possible with 10 round mag and or drum they tend to load differently see where your at. as for auto plug it can be put in anytime but it better to tune with larger mags or drums because you get more shots out in a row to see if you are tuning it right. hand cycle the bolt 100 or 200 times that will brake it in too. i hand cycle mine 30 or 40 once or twice a week it cheaper than buying ammo it to break in the action.

I believe there only ones making barrels http://iccmfg.com/saiga.html at this time.

could try some pb blaster spray on pins on both sides and the barrel tube gas block let them soak in for like 10min 15min then give gas block with rubber or dead blow hammer on both sides couple times this should loosen it up support barrel and gas tube and front barrel the side block which does looked peened, use nail punchs they are stronger pins should come out then whack gas block off. make sure your working on hard flat surface not rug or soft because it absorbs your impact,

welcome

first of all that stock on ebay is piece of junk, second both pic's that you posted have great hi dollar stocks folder's on them already if their your guns? third if your gun does not have " the metal piece where 2 screws on the top and 1 at the bottom can be placed". this means you gun has been converted already. forth use search as many posts to tell you how this is done .read pinned topics or stickies or you tube the videos. please post pictures of you gun to show what you have for us to help.

The recoil spring is NOT recommended for heavy 2-3/4 loads or hot highbrass birdies and NEVER use that spring with 3" magnums. I use the stock spring. Css puck and dph gas adjustment knob. Shoots everything. Lowbrass on 4 and 5. Occasional rounds of winchester bulk or federal 1 oz loads might have a problem ejecting I would say 5 out of 250. I could crank the knob to 6 but im happy where its at. You shouldnt need a spring to get it running goos honestly. Thats jerryriggin the problem. ya ,he & I were talking low brass walmart ammo and such not good stuff that stuff use stock sprin

I would jump on it I paid $895.00 in feb ,then they sky rocketed $1200 to ? now the price is coming down ,I doubt we will see much below $600-750 range from now on. where they were $400 range

I had same problem I have 4 port gun .093 drilled ports ,fte's then added css puck it got better then added css PERFORMANCE Recoil Spring for all Saiga Shotguns SKU: SPRING-#1 smoothing the carrier and bolt hammer helps too now I get couple fte's its livable. you can polish carrier, bolt ,rails etc.. just look at wear marks on each item and where paint is wore off that tells you where it dragging, keeping cycling bolt by hand I haven't polished anything yet but have grinded with 3m rloc discs on air die grinder which take metal off the metal lightly and polish at same time. do l

no help ,could plate and rivet& jbweld mag or drum to receiver pain in ssa to load but maybe ?

if there were blue prints and measurements there would be more critical parts being made it is ak platform so exact measurements differ from gun to gun not model to model and how much vodka was drank through the shift your better off buying a stock stock from ebay from take off and get measurements from that.

sorry, to tell you it is not profiled is like every other from factory if it was it would have rounded edges smooth not sharp flats.

good luck none available, don't exist. one hardest items to get if at all its like a unicorn or bigfoot. your better off take off any aftermarket parts and keep them and part out the parts from stock guns and and use money by new guns. bolts when they come up for sale are $300.00

chaos all the way $129.00 for extended rail system you get what you pay for most other are junk. whats $30-40 for quality?

if you are right hand shooter and have large hand and fingers like me, you will have to trim css bho sticks little farther than stock one but easy fix with dremel and a grind bit, chaos titian extended is awesome product same one on my gun, i opted to go with kock off mag puls hk sights off ebay $22.00 because its shotgun,$80 bucks can be better spent elsewere IMO. pistol grip for fore grip because chaos quad rail makes front of gun heavy I chose mako it has nice feel I wish ati had one like scorpion grip, but they don't. IMO ati grip is awesome you will like .but side f

I think they should band Catamount Fury pos

thanks very for the great pics

yes, don't buy any parts yet shoot it the more internal parts you change the harder it is to find out what is wrong with it if there is anything with it. shoot it with the ammo you are going to shoot it with if everthing goes well then go to autoplug get to know your gun before adding parts most of internal reilibity parts are bandades for gas system that maybe the problem in most guns. also need to check how smooth bolt carrier slide you don't want It to be rough. since you are new to this. post some pic of gun

welcome, stock plug ,you need to shoot it and post results any issues like FTE's etc... you will want to read even print out this post study it solves most problems and answers. http://forum.saiga-12.com/index.php?/topic/82039-not-cycling-high-brass-help-a-newbie-out/&do=findComment&comment=825101

I think a 12ga shotgun should have either or metal or wood stock ,I don't think plastic or polymer belong on shotgun do to recoil specially folder. I they were made Ar10-15 and M4 platform lot less recoil plastic is plastic it just doesn't live forever actually it should stay on airsoft guns. I like my ace stock and folder all aluminum

I have to clean it this week, so I will get some more informative pics. Functionally, it has been perfect. thanks, I would expect that from Cadiz Gun Works just looking for some good pics of install before I order kit to do myself. since they are not doing any at this moment.

or look into the receiver from the top without the bolt and carrier? thanks